Kohler Nectar 98200A-CP User manual

All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time
without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1.) Flush the water supply pipes thoroughly to remove debris.
2.) An in line water filter must be used with this product.
3.) The highest working pressure for the hand shower is 0.5Mpa(5 bars). If it exceeds 0.5Mpa(5 bars) a
pressure reducer is needed. The highest water and environment temperature is 60 C. Please keep the
hand shower away from any heater or it may become damaged and cause injury to the user.
4.) Don't remove the flow controller or the hand shower will be damaged.
1201504-AN2-A 16/09/2013
Nectar Slide Shower: 98200A-CP
BEFORE YOU BEGIN
ROUGH-IN DIMENSIONS
INSTALLATION INSTRUCTIONS
685
580
50.4
558
602
1500
G1/2”
G1/2”
Ø93
219
G1/2”
Slide Shower
NECTAR
SHOWER TAPWARE

1.) Decide on a suitable position for the slide bar avoiding
buried cables and pipes in the wall.
2.) Mark the wall fixing hole positions for the top of the slide
shower and drill two holes to suit the bracket(1).
Insert anchors(2) into the holes.
3.) Fix bracket(1) to wall using screws(3).
4.) Rehearse installation of the slide bar using screws(5)
slide bar(4) and bracket(8). Mark the outline of the lower
bracket on the wall and find the position of the holes.
Drill two holes to suit the bracket(8). Insert anchors(2)
into the holes.
5.) Fix bracket(8) to the wall using screws(3).
6.) Slide the handspray holder(9) onto the bar(4).
Adjust the holder to the proper position. Tighten the slide
bar kit with screws(5).
7.) Slide the bracket covers(6) onto the slide bar, and install
the bar end covers(7).
INSTALLATION
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a clean
soft cloth. Many cleaners may contain such chemicals as ammonia, chlorine, toilet chemicals etc. which
could adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler fittings.
SPARE PARTS
**Color code must be specified when ordering
1201504-AN2-A 16/09/2013
3
1201504-AN2-A 16/09/2013
2
Slide Shower
NECTAR
SHOWER TAPWARE
Nectar Slide Shower: 98200A-CP
1190001**
Bracket Cover
1190000**
Bracket
1187786**
Slide Bar
1190005**
1
Handspray Holder
1190000**
Bracket
1190006**
Cover
1190006**
Cover
1190001**
Bracket Cover
831727**
Shower Hose
1210988**
Nectar Hand Shower
1061576
Screw Kit
1061576
Screw Kit
3
5
4
9
6
6
7
7
5
2
8
3
2