KOKKO MINI PEDAL User manual

TUNER
1 9V DC Jack 2 LED Display 3 FLAT/DISP.
4 1/4 inch(Mono)OUTPUT Jack 5 Note Display
6 PITCH 7 1/4 inch(Mono)INPUT Jack
8On/Off Switch
SPECIFICATIONS
Tuning mode: Chromatic
Tuning range: A0(27.5)~C8(4186Hz)
A4 range: 435~445Hz
Flat tuning:
Tuning precision: ±1 cent
Detection method: Audio Signal Input
Display mode: LED
Tuning method: Auto
Power: DC 9V adaptor
Dimensions: 94(L) x53(W) x53(H)mm
Weight: 165.7g
OPERATION
1.When connected to an audio cable, the MINI TUNER will go
into Bypass mode. Press[On/off Switch]to enter tuning mode
as shown in the picture below:
2.Press [ ]to change the tuning mode display:
Normal or strobe.
FLAT/DISP.
a)Normal
Flat: Red LED to the left of center lights.
In tune: Green LED in the middle lights.
Sharp: Red LED to the right of center lights.
Sharp
In tuneFlat
b)Strobe display
Sharp
In tuneFlat
15 16

Flat: LED moves to the left.
In tune: LED stops moving.
Sharp: LED moves to the right.
Notice: When the note is out of tune (sharp or flat), the
Strobe moves fast, which means the note is way off. The
display will move slower and slower until the note is in
tune then it stops!
3.Flat tuning
Press [ ]quickly to set flat tuning, as shown in
picture below:
FLAT/DISP.
Press [ ]quickly again to adjust flat tuning range:
Release the pedal. The LED will flash for 2 seconds, which
means it is ready to enter tuning mode automatically.
FLAT/DISP.
One example of Flat tuning is shown in picture below:
4.Setting A4 range
In tuning mode, press[Pitch]to enter the A4 setting interface.
Press [Pitch]again to set A4 from 435~445Hz. The default
A4 is 440Hz, as shown in picture below:
A4 Loop:
440Hz
439Hz
438Hz
437Hz
436Hz
435Hz
441Hz
442Hz
443Hz
444Hz
445Hz
440Hz
441Hz
442Hz
443Hz
444Hz
445Hz
439Hz
438Hz
437Hz
436Hz
435Hz
17 18

MINI LOOPER
Control Panel Instruction
1. DC In Power Jack
Use a 9-volt DC regular adapter for power supply.
2. USB Interface
Connect to PC for software update, loop import or export
3. Loop Level Knob
Rotate the level knob to control the volume of your loop.
4. OUTPUT Jack
1/4” mono audio jack, for output the signal
5. STATUS LED
LED light displays different status of Mini Looper
6. INPUT Jack
1/4” mono audio jack, for connecting guitar/bass
7. FUNCTION Foot Switch
The foot switch is for you to control all the loop
relevant functions.
Power Supply
Please make sure your pedal is connected to an DC adapter
with 9V (±10%)Voltage.Unplug the DC adapter when not
using the product or during theThunder storm.
Attentions
Connections
Please always turn off the power of the relevant equipment
when connectingOr disconnecting with the pedal.It will help
to prevent the damage cause toThis product and other
relevant equipment.
Interference
Radio and television which is placed nearby the pedal may
cause receptionInterference.Please use the product in a
suitable distance from radios and Television.
Location
To avoid deformation,discoloration,or other damage to the
product.Please doNot expose the unit to the following
conditions:
.Direct sunlight
.Heat sources
.Magnetic fields
.Extreme temperature or humidity
.Excessive dusty or dirty location
.High humidity or moisture
.Strong vibrations or shocks
Main Characteristic
.48K,24bit lossless,uncompressed,professional tone
quality.
.Metal shell with compact and very small design
.Unlimited overdub loop,support 5 minutes recoding.
.One footswitch to control all functions:record,play,stop
overdub,undo,redo,delete.
.Supporting import and export with lossless wav file at
borh Windows/Mac OS.
19
20

Operation
Power on Connect a power supply
Record Tap foot switch once
Switch to playback Tap foot switch again
Undo/Redo last
recording
Stop Double-tap foot switch
Stop and delete
the loop
Resume playback Tap foot switch again
Resume playback Tap foot switch again
Press and hold foot switch
(when looper is disengaged)
Press and hold foot switch
Double-tap and hold foot switch
Delete the loop
Technical Specifications
Maximum loop length 5 minutes
Maximum no.of overdubs Unlimited
Latency None(analog dry-though)
Dimensions 90mm(D)*40mm(W)*49.5mm(H)
Input connector type Standard 1/4” jack-mono/TS
Output connector type Standard 1/4” jack-mono/TS
Power input Standard 9V DC
USB connector type Micro-B USB
Controls Loop level knob(Loop playback
volume) Switch(Loop playback
control)
21

分
パ