Kolin KCF-10TRD User manual

STANDING
CIRCULATION FAN
INSTRUCTION MANUA
Model:KCF-10TRD
Please read the instructions carefully before using this product.
INSTRUCTION MANUAL

PRODUCT PARAMETERS
Product name:Standing Circulation Fan
Model:
Adapter:
KW-MF02RBADC24V,
1A
Motor:DC Motor
Rated power:24W
Product size:602X524X962mm
Net weight:
Packing list:
2.08kg
folding fan x 1、Iron pipe x6、remote control x1、
User manual x1、power adapter x1
POWER ADAPTER SPECIFICATION
Input data:AC100-240V,50/60Hz
Output date:DC24V,1A
WIRING DIAGRAM
M
PERFORMANCE FEATURE
The fan bracket can be disassembled insections, saving storage space and
convenient to use at office, family and dormitory.
Adjustable wind speed from 1to 9 grades, adjustable timing from 1 to8 hours.
Remote control operation, more comfortable to use.
Wide-angel air supply. The oscillation angle can reach 120° while the tilting
head up to 100° (some models).
FAN
PCB
board
KCF-10TRD
Fan head x1
Timer setting from 1 to 8 hours.
Wide-angle
.

PRODUCT SIZE
602mm
524mm
962mm

MAIN PARTS
Outlet housing Inlet
housing
Tilt
adjustment
Oscillate
Timer
Wind
speed
Status
panel
Body
Upper
foot tube
On/Off
Lower
foot tube
On/Off
Left & Right
oscillation
Tilt oscillation
Timer
Wind speed+
Wind speed-
Remote-control unit
(For the first time, please pull out
the battery insulation sheet)
Output
plug
Adapter
input plug

INSTALLATION
Notice: Do not insert the adapter output plug into the body when
installing fans
Align the lower foot tube with the thread hole of the upper foot tube in turn,
tighten clockwise; Then, align the foot tube with the thread hole of the body
and tighten it clockwise. (As shown below)
Body
Upper foot tube
Lower foot tube
USE GUIDE
After assembling the fan components according to installation requirements,
place the fan on a smooth ground or table top, insert the power adapter
output plug (DC24V 1A) into the power input port at the bottom of the fan
head, and then insert the adapter input plug into the household power socket.
After the preparation, the fan can be controlled by the touch switch on the
control panel, or the remote control can be used to control the operation.
(Before using the remote control, remove the battery isolation strip at the
end of the remote control)

OPERATING INSTRUCTION
Timer shutdown
indicator
Display current wind
speed or auto
shutdown time
Tilt
Oscillation
100°
120°
90°
60°
h Timer
Wind speed
Angle of tilt oscillation
On/ Off
Angle of left and
right oscillation
1.
On/off
After the power is switched on, press the switch button “”in standby state,
and the fan enters l speed working mode. Press the switch button again, and
the machine enters standby state.
2.
Wind speed adjustment
After the fan is turned on, when touch the wind speed button “”lightly, the
wind speed will increase by 1 speed according to the current speed every time.
If wind speed is adjusted to 9 speed, press the wind speed button again and
the gear will continue to circulate from 1 speed.
3.
Timer setting
After the power is switched on, press the switch button “” in standby state, and
the fan enters l speed working mode. Press the switch button again, and the
machine enters standby state.
4.
Oscillation setting
When the fan is running, tap the oscillation button “” to enable the oscillation
function. The angle of oscillation is 60 degrees. Tap the oscillation button once,
and the angle of the oscillation increase to 90 degrees and 120 degrees
successively until the oscillation function is closed.
5.
Tilt setting
When the fan is running, tap the tilt oscillation button “” to enable the fan tilt
oscillation function. The fan tilt angle is 100°. Tap the tilt oscillation button again
to turn off the tilt oscillation function.
Tapping the button continuously,
to 8 hours. To remove timer, press the timer button until "0h" appears.
the control panel.
Press the timer button consecutively to set the time of operation from 1 hour up
After the turning on of the fan, press the timer button
After the plugging in of the unit, press the On/Off button
After the switching on of the fan, touch the wind speed button

COMPONENT DISASSEMBLY INSTRUCTION
FRONT HOUSING DISSASSEMBLING
1
Turn the phillips screwdriver
counterclockwise to remove
the outlet housing screw
2
Rotate the outlet housing
counterclockwise to unlock
3
Remove the outlet
housing
BLADE DISASSEMBLING
4
Rotate clockwise to release blade lock
5
Draw blade forward to remove blade
Obverse of blade
REAR HOUSING DISASSEMBLING
6
Turn the phillips screwdriver
counterclockwise to remove
the inlet housing screw
7
Rotate the inlet housing
counterclockwise to unlock
8
Remove the inlet housing

NOTES:
Please use the power adapter provided with the product. Before use,
please make sure that the input voltage is used as required by the adapter
within the voltage range (Adapter input : AC100-240V, 50/60Hz; output:
DC24V, 1A).
The user is not allowed to disassemble and replace the internal parts of the
fan at will. If there is any fault, please contact the after-sales service depart-
ment for repair.
If this product has technical improvements in the future, will not notify other-
wise.
If the appearance and color of the product are changed, please refer to the
actual product.
This product wind is strong, so suggest not to blow directly to babies and
the elderly for a long time.
When the power cord or product is found to be damaged or unsafe, please
suspend use, and contact the factory or its after-sales service agents, or
qualified personnel to replace. Do not repair and check by yourself.
Children, elderly or patients who have lost the ability to take care of them-
selves should use this product under adult supervision to prevent acci-
dents.
This product should be placed out of reach of children, and the children
should be taught correctly. Do not use this product as a toy.
In order to avoid electric shock, no part should be in contact with water.
There can be no objects blocking the air inlet/outlet.
Please use this product in an environment of 0~40℃. Don't put the fan in
the bathroom, humid or very high temperature place, so as not to damage
the product.
Please keep the fan away from soft objects such as curtains and door cur-
tains to avoid getting caught in the fan.
Please unplug the power plug before cleaning or moving the product.
When the fan is not used for a long time, please unplug the power plug to
prevent the product from shortening the product life and causing accidents
or dangers in the standby state for a long time.
Product features and specification are subject for change without prior
notice.
Avoid aiming directly to babies and elderly for a long time as the product
wind is strong
the use. Contact the Authorized Service Center or its after-sales
service agents to replace the product. Do not repair and check by yourself.

Do not put fingers, other body parts or debris into the air inlet/outlet to avoid
injury and damage to the product.
Do not put wet towels or wet wipes on the product to avoid electric leakage
and electric shock accidents.
When removing the protective shell for cleaning, be careful not to touch the
touch buttons to avoid accidents in the operation of the product.
Please do not throw this product away with other household
waste. When it is no longer used, the product must be sent to the
appropriate department for recovery and recycling. For informa-
tion about the collection system, please contact your local govern-
ment. If you place electrical appliances in a landfill or garbage
dump, harmful substances may seep into the groundwater, enter
the food chain, and harm your health and life.
CLEANING MAINTENANCE AND SAFETY MATTERS
1. When cleaning, maintaining or moving the product, you must first turn off the
product and then unplug the power cord.
2. The fan must be completely stopped before it can be cleaned to avoid injury.
3. Do not immerse the power cord or main unit in water for cleaning or wash it
under a faucet. The internal parts of the fan must not be wetted.
4. Do not use detergent, wire brush, gasoline, alcohol, vinegar or other volatile
corrosive liquids to clean the product to avoid damage to the product.
5. Clean the surface of the fan with a slightly damp cloth.
6. After cleaning, the product must be complete dry before it can be connected
to the power supply
7. If you will not use it for a long time, please store the product back in the box
and store it in a dry, cool and safe place.
If you place
electrical appliances in a landfill or garbage dump, harmful
substances may seep into the groundwater, enter the food chain
and harm your health and life.

6. After cleaning, the product must be completely dry before it can be connect-
ed to the power supply.
7. If you will not use it for a long time, please store the product back in the box
and store it in a dry, cool and safe place.
8. The humidifier needs to take the absorbent cotton out of the product, and
gently squeeze the water out, then place the absorbent cotton in a dry and
ventilated place, let it dry naturally and store or use it again; clean the atomized
sheet part with a soft brush.
9. When cleaning the outer surface of the humidifier, dilute it with a neutral mild
detergent, and then wipe it with a cloth dampened with it.
Attention
Do not install three brackets only!
It will cause the product to beunstable
in use and there is a risk of dumping.
TROUBLESHOOTING
FAULT CAUSE TREATMENT
DESCRIPTION
ANALYSIS
MEASURES
Machine
can't work
The adapter is not
plugged in.
Plug intheadapter
power cord plug.
No power supply.
Replace power supply.
The switch button is
not pressed.
Press the switch
button again.
Abnormal
sound
Wind leaf cracking.
Replace the fan blades.
Motor damage.
Replace the motor.

The design and specifications are subject to change without prior
notice for product improvement. Any updates to the manual will be
uploaded to the service website, please check for the latest version.
If you have any concerns, please contact us at the following:
Customer hotline: (02) 8852-6868
Text hotline:
+63 917-881-8982
Email: customerservice@kolinphil.com.ph
Also, please like and follow us on our social media accounts:
Facebook:
Instagram
Youtube:
Tiktok:
Website:
kolinphilippines
kolinphilippines
kolinphilippines
kolinphilippines
www.kolinphil.com.ph
KPII10052022

Table of contents
Other Kolin Fan manuals