komodo KDBCHVLBLSA User manual

BEACH VOLLEYBALL SET
KDBCHVLBLSA

1
Carry bag
9
Round pegs (x4)
2
Bungee ties (x4)
10
‘V’ pegs (x4)
3
Pump
11
Peg bag
4
Tension straps (x4)
12
47cm Steel tube (x2)
5
Line markers (6x12m)
13
62cm Steel tube (x2)
6
Volleyball
14
90cm Steel tube (x2)
7
Metal buckle (x2)
15
120cm Steel tube (x2)
8
Square clips (x2)
16
Net
COMPONENTS
1
2
5
10
9
3
4
6
7
8
11
12
13
14
15
16

Step 1:
Unfold and spread out the net.
Step 2:
• The height of the net can be set to different heights using the 47cm poles and a
combination of the 62cm, 90cm and/or 120cm poles.
• To connect the poles together, press and hold down the spring bead head, then insert
the desired connecting pole. Adjust the spring bead until it locks into place.
• Repeat for the opposite pole, ensuring the size of the poles used matches.
ASSEMBLY

Step 4:
Insert the assemble steel tubes into the blue sleeves on the net.
Step 5:
Attach the tension straps, using the metal buckles to the black loops on the net.

Step 6:
Insert the assembled steel tubes into the ground
Step 7:
Attach the net lower straps to the steel tubes and secure them in place using the square
clips. Ensure there is sufficient tensions on the straps to hold the net in place.

Step 8:
Use the ‘V’ pegs to secure the guy ropes to the ground. Adjust the tension on the ropes to
ensure the net is firmly in place.
Step 9:
Use the round pegs to secure the line markers to the ground.

Step 11:
To inflate the ball, remove the needle and attach it to the pump.
Step 12:
When finished, the needle can be inserted into the valve on the ball to deflate it.
Step 13:
• Dismantle the net by following the steps in reverse.
• Carefully fold up the net and store all components into the carry bag.

NOTES