
Aufbauanleitung
FA-03-Monitor-Galgen
Assembly Instructions
FA-03-Monitor-Gallow
Aufbau
Assembly
Heben Sie die Bodenplatte an und fügen die erste Befestigungsschraube von un-
ten in eines der Bohrlöcher ein.
Lift the base plate and insert the rst fastening screw from below into one of the drill holes.
Halten Sie das Bodenprol an die Bodenplatte und drehen die erste Befestigungs-
schraube handfest ein. Wiederholen Sie den Vorgang mit den weiteren drei Befes-
tigungsschrauben.
Hold the oor prole against the oor plate and screw in the rst fastening screw hand-tight. Repeat the
process with the other three fastening screws.