KonNad C2000-A2-SDD8020-BB3 User manual

Last updated: 2019-12-13
C2000-A2-SDD8020-BB3
User Manual
Ethernet ⇋ 8DI + 2DO
Remote I/O Module — Ethernet Digital I/O Module
SinoCon Co., Ltd.

2
5
5
7
8
9
10
10
11
12
Catalog
Catalog
1. Hardware Description
1.1. Specifications
1.2. Apprearance
1.3. Indicators
1.4. Port Description
1.5. Product Dimensions
1.6. Installation Method
2. Package Contents
3. Warranty Policy
C2000-A2-SDD8020-BB3 User Manual
2 / 12
SinoCon Co., Ltd. www.sinoconsys.com

Copyright Notice
©2000 - 2019 SinoCon Co., Ltd. All Rights Reserved.
Trademarks
The KonNaD logo is a registered trademark of SinoCon Co., Ltd. All other trademarks or registered marks in this
manual belong to their respective manufacturers.
Disclaimer
This document only provides information about KonNaD products. No license to any intellectual property rights is
granted by this document, including any intellectual property licenses, expressed or implied, or by any means.
SinoCon assumes no responsibility other than the liability stated by SinoCon in the terms and conditions of sale of
its products and SinoCon makes no warranties regarding the sale or use of KonNaD products, including the
suitability for the specific use of the products, and marketability, and SinoCon doesn't guarantee that it won't
infringe any patent, copyright or other intellectual property rights, etc.
Information in this document is subject to change without notice and does not represent a commitment on the
part of SinoCon.
Contact US
SinoCon Co., Ltd.
Address: 16th Floor, Tower A, Zhongyin Building, Caitian Road, Futian District, Shenzhen, China
Web: www.sinoconsys.com
Tel: [phone]
C2000-A2-SDD8020-BB3 User Manual
3 / 12
SinoCon Co., Ltd. www.sinoconsys.com

C2000-A2-SDD8020-BB3 User Manual
4 / 12
SinoCon Co., Ltd. www.sinoconsys.com

1. Hardware Description
1.1. Specifications
Classification Parameter Specification
Digital Input DI Channels 8
DI Connector Terminal block
Input Type Dry contact
DI Mode Logic level
Digital Filtering Time Interval 6 sample periods
Counter Frequency 1kHz
Digital Output DO Channels 2
DO Connector Terminal block
DO Type Form A
DO Mode Logic Level
Contact Capacity 30V/3A
Ethernet No. of Ports 1
Bandwidth 10/100M
Communication Distance 100m
Industrial Protocols Standard Modbus TCP Protocol
Protocol Mode Support TCP Server/Client Mode
Downstream Serial
Port
Serial Standard RS485
No. of Ports 1
Connector Terminal block
Cascade Connection/Transparent
Transmission
RS485 cascade connection
C2000-A2-SDD8020-BB3 User Manual
5 / 12
SinoCon Co., Ltd. www.sinoconsys.com

Power Power Connector Terminal block
Input Voltage 9~27VDC
Current 200mA @ 12VDC
Physical Characteristics Dimensions 75*105*30mm
Installation Din-rail or wall
Environmental Limits Operating Temperature -40℃ ~ 85℃
Storage Temperature -60℃ ~ 125℃
Ambient Relative Humidity 5% ~ 95% RH, non-condensing
Classification Parameter Specification
C2000-A2-SDD8020-BB3 User Manual
6 / 12
SinoCon Co., Ltd. www.sinoconsys.com

1.2. Apprearance
C2000-A2-SDD8020-BB3 User Manual
7 / 12
SinoCon Co., Ltd. www.sinoconsys.com

1.3. Indicators
Classification Indicator Description Meaning
Digital Input DIx Digital input
indicators (dry
contact)
Steady on：Short to GND
Off：Open
Digital
Output
DOx Digital input
indicators
Steady on：On
Off：Off
Ethernet LINK Network status
indicator
Steady on：Network connection enabled
Flashing：Transmit or receive data
Off：The network port is not plugged into the network
cable
SPD 10/100Mbps
indicator
Steady on：100M network connected
Off：Not connected to the 100M network
Downstream
Serial Port
RXD RS485 data receive
indicator
Steady on：RS485 line fault, please check if the positive
and negative poles of 485 line are reversed
Flashing：RS485 receiving data
Off：RS485 no receiving data
TXD RS485 data
transmit indicator
Flashing：RS485 transmitting data
Off：RS485 no transmitting data
Power PWR Power indicator Steady on：Normal power supply
Off：No power or abnormal power supply, please
check if the voltage range is 9~27VDC
RUN RUN Running indicator Steady on：Device exception
Flashing：Flashes every 1 second when the device is
ready
Off：Device exception
C2000-A2-SDD8020-BB3 User Manual
8 / 12
SinoCon Co., Ltd. www.sinoconsys.com

1.4. Port Description
Classification Port Description Recommended
wiring
Digital Input DIx Digital input RVV 2*0.5
GND Dry contact input common RVV 2*0.5
Digital Output NO Digital output normally open RVV 2*1.0
COM Digital output common RVV 2*1.0
Ethernet Ethernet RJ45 Ethernet port CAT-5e
Downstream Serial
Port
485+ 、
485-
RS485+, RS485- (downward) RVSP 2*1.0
Power Input V+、V- Power supply input positive, power supply input
negative
RVV 2*1.0
C2000-A2-SDD8020-BB3 User Manual
9 / 12
SinoCon Co., Ltd. www.sinoconsys.com

1.5. Product Dimensions
unit: mm（inch）
1.6. Installation Method
C2000-A2-SDD8020-BB3 User Manual
10 / 12
SinoCon Co., Ltd. www.sinoconsys.com