Bedtime Ezra User manual

ASSEMBLY INSTRUCTIONS
Ezra Bed - Single, Double & King
/ 51

· Due to the size of this product, we recommend that it is assembled in the room
intended for use.
· When you are ready to start, make sure that you have the right tools, plenty of
space and a clean, dry area for assembly.
· Unwrap all packaging materials and place the components on top to the carton
box or on a clean blanket to prevent it and your floor from scratching.
· PLEASE KEEP THE ORIGINAL PACKING UNTIL YOUR ITEM IS FULLY
ASSEMBLED. IN THE UNLIKELY EVENT YOU NEED TO RETURN YOUR
PRODUCT, IT MUST BE RETURNED IN ITS ORIGINAL PACKING,
OTHERWISE NO RETURNS WILL BE ACCEPTED.
· Keeping small parts in a bowl should reduce the changes of losing any small
components.
· Check the pack and make sure you have all the parts listed.
· Ensure that the product is fully assembled and secured as illustrated before use.
· Check all screws or bolts are tightened and inspect regularly - this is a normal
requirement of flat-pack furniture.
· This product should only be used on firm, level ground.
· Please dismantle fully before transporting anywhere.
· IF THIS PRODUCT IS GOING TO BE USED ON A WOOD, LAMINATE OR
TILED FLOOR, YOU MUST APPLY "ANTI SLIP PADS" TO ALL LEGS
TOUCHING THE FLOOR.
THESE ARE AVAILABLE TO BUY IN MOST HARDWARE SHOPS IN A
FELT MATERIAL OR RUBBER AND ARE RELATIVELY INEXPENSIVE. THE
PADS WILL PROTECT YOUR FLOOR FROM ANY MARKING AND ALSO
FROM SLIPPING.
FAILURE TO APPLY THE PADS WILL RESULT IN NO RETURNS OF THE
PRODUCT AND ANY SPARE’S REQUESTED.
WARNINGS
· This product is intended for a maximum person's weight of 75kg per side. Do not
exceed this weight.
· Keep small parts out of reach of children, as they present a choking hazard.
· Make sure the legs remain in contact with the ground.
· Do not use power tools to construct this product. Only use those tools listed. The
use of power tools will invalidate any future claim.
· Do not tighten screws fully until fully assembled, to ensure that the product is
square.
· Do not use the product if parts are missing, damaged or worn.
· Do not stand directly on the product. Keep sharp or heavy objects away from the
surface of the product.
· Incorrect installation could lead to injury. Take care following instructions.
CARE INFORMATION
· Never use scourers, abrasives of chemical cleaners. Avoid contact with hair
spray, nail polish or varnishes.
· To clean, wipe with a sponge and warm soapy water. Do not use solvent-based
cleaners or detergents as they can bleach or damage the product.
· Once you are satisfied with your new product, please dispose of all packaging in
a safe and environmentally friendly way.
2 / 5
IMPORTANT - READ CAREFULLY -
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

1
2
3
4
4
5
6
7
8
E F
Slat End Caps
x28 pcs Double
x30 pcs King
Plastic End Caps
x6 pcs
COMPONENTS
M6 x 15mm
x11 pcs
D
C
B
M6 x25 mm
x6 pcs
FITTINGS
A
M4 x Allen Key
x1 pcs
Centre Rail Foot
x3 pcs
G
Slat Centre Caps
x14 pcs Double
x15 pcs King
Flat Washer
x9 pcs
H
3 5 /

1
2
3
4
4
局部视图
比例 1 : 5
B
E
C
局部视图
比例 1 : 5
5
6
H
H
局部视图
比例 1 : 5
A
C
局部视图
比例 1 : 5
A
E
局部视图
比例 1 : 4
B
M6 x 15 8pcs
M6 x 25 6pcs
C
1
2
E
Flat Washer*6pcs
4 5 /

C
7
局部视图
比例 1 : 5
B
H
局部视图
比例 1 : 5
D
局部视图
比例 1 : 5
F
局部视图
比例 1 : 5
G
8
M6 x 15 3pcs
3
4
Flat Washer*3pcs
/ 55