KVM RMD-17W-D2 User manual

- 1 -
RMD-17W-D2
Rack Mount Dual LCD Display Drawer

1.8 Meter VGA cable
- 2 -
This manual, covering various aspects of the equipment such as installation and setup,
which will help you make full use of this LCD Drawer. Please read this manual
carefully, install and operate the equipment according to the manual to avoid damage.
Product package includes following items:
1 * Dual screen LCD drawer;
1 * AC Power Cord
1 * Rack installation bracket ( one pair )
1 * USER’S manual (CD)
Please check items above. If any item is missing or damaged, please contact your dealer
promptly.
2 *
1.8 Meter DVI cable
2 *
1.8 Meter Audio cable
1 *

- 3 -
Table of Contents
1 Introduction …………………………………………………………………………-4-
1.1Overview…………………………………………………………………...…. -4-
1.2 Functions & Features…………………………………… ……………...…..-4-
1.3 Hardware Requirement……………………………………………..….……-4-
1.3.1 Host Requirement………………………………………………....… -4-
1.3.2 Cables…………………………………………………………...….… -4-
1.4 Product Specifications………………………………………………..….…..-5-
1.5 LCD Specifications………………………………………………….…..……-5-
1.6 Front View………………………………………………………….…..……. -6-
1.7 Rear View……………………………………………………………..….…...-7-
2 Installation……………………………………………………………………...……-8-
2.1 Rack Installation……………………………………………………………… -8-
2.3 Standard Installation……………….………………………………….…… -10-
2.4 LCD OSD Menu Setup………………………………………………..….… -11-
3 Certificates………………………………………………………………..….….… -12-
2.2 Operation…..................…………….………………………………….…… -9-

- 4 -
1 Introduction
1.1 Overview
RMD-17W-D2 LCD integrates 2 x LCD display and in a drawer type worktable
and provides a convenient space-saving display mode.
1.2 Function & Features
RMD-17W-D2 is 2U height, supported resolution
up to 1920 x 1200, 75Hz. It can be
installed into19 inch rack cabinet . No need to install additional software or hardware.
1.3 Hardware Requirement
1.3.1 Hosts Requirement:
(1) DVI, VGA graphic card
Note: the max. resolution of the integrated LCD display is 1920x1200. Make sure the
resolution of any connected computer does note exceed this resolution.
1.3.2 Cables
(1) 2x DB-15 VGA cable male to male
(3) 1x Audio Cable
(2) 2x DVI-D Cable male to male
With a graphic card, screen can be cloned or extended to each screen; or can display
independently. With screen extended function, people can be multi-tasking in different
screens.

- 5 -
1.4 Product Specifications
443 x 67 x 580 mm
Model RMD-17W-D2
Brightness 300cd/m2
Contrast 650:1
Angle of visibility 140°(H),120°(V)
Color display 262K
DVI-D
VGA HD-15 female connector
Local Control
Terminal
Power supply
Housing Metal housing
Weight 12.5Kg
Dimension(W x H x D)
100-240V AC 50/60Hz via IEC Type power cord
24 pin DVI-D female connector
Video resolution native 1920 x 1080 (support up to 1920 x 1200)
(Master)
DVI-D
VGA HD-15 female connector
Local Control
Terminal
24 pin DVI-D female connector
(Slave)
Audio 3.5mm stereo jack

- 6 -
1.6 Front View
NO Part Function Description
2 LCD display
2
4
3
1
4 LCD OSD button
3 Mounting bracket Install into rack cabinet
LCD button to control Screen Display position and
image setting.
1 Handle to adjust screen tilt; lock/release rail sliding

- 7 -
1.7 Rear View
No Component Function Description
1 AC Power port Standard IEC Type AC Inlet
2 Power Switch Rock switch, turn on/off equipment main power.
3 Audio port For audio function
4 VGA port Connect to server or KVM.
5 DVI port Connect to server or KVM.
1 2 3
454
No Component Function Description
5

2 Installation
2.1 Rack Installation
- 8 -
Front mounting bracket (L&R)
Rear mounting bracket (L&R)
■Rear mounting bracket, screw M6 *4pcs
Step 1
Back View
Step 2
Front View
■Insert the left and right front mounting brackets into
rear mounting bracket, screw M6 * 4pcs
■Slide KVM into mounting bracket
Step 3
Front View
■Screw M4 *2pcs at Point B
Step 4
Front View
■Screw M4 *4pcs at Point A

2.2 Operation
■
Step 1
Unlock handle C to release rail locker and slide out
■
Use locker D to stable the rail
Step 2
■Lift up LCD panels
■
Step 3
Hold Point F to open the right panel
Step 4
- 9 -
■Retractable tray could be pulled out when needed
Step 3
Step 5
■Based on step 4 --- 3 --- 2 to put away
LCD panels
■
Unlock locker D
■
Use handle C to lock into cabinet

- 10 -
2.2 Standard Installation
Please follow the installation drawing and instructions below for standard installation:
* Please Shutdown the Power of Equipment Needs to be Connected
* Please Pay Attention to Earthing of Equipment
The standard installation is completed, and LCD drawer can be powered on. Then
power on connected hosts.
Independent
Extend
Clone
Demonstration of Different Display Mode

- 11 -
2.3 LCD OSD Menu Setup
OSD Control buttons
LCD OSD can establish and setup LCD display. Setup instructions of four buttons are as
follows:
Button Functions
POWER Turn on or off the LCD Display
MENU Activate OSD menu, select a menu and press MENU key to confirm the
selection and enter the submenu.
▲Press this key to increase setting or scroll up the menu bar
▼Press this key to Decrease setting or scroll down the menu bar
AUTO
OSD Control Operation
Main Menu
press the auto key to select video source

- 12 -
3 Certificates
FCC
This product has been tested and is proved to meet requirements of Grade B electronic
devices and specifications of Section 15 of FCC certification. Please observe following two
conditions in operation that:
(1) The equipment will not generate any harmful interruption.
(2) If the equipment is interrupted, it may cause unnecessary operations.
CE
This equipment complies with regulations of EN55022:CLASS B.
RoHS
The whole package including products, packaging materials and documents meet RoHS
equipments.