Kwiktech Darwin User manual

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 1
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
General
Arrangement
3100mm
3100mm
3002mm
3602mm
2165mm
1455mm

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 2
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Materials
List
NON KWIKTECH ITEMS
ITEM ITEM ID # ASSEMBLY ID # LENGTH COLOUR QUANTITY RESELLER RPICE
SHS 75x50x2.0mm 2900 Galv 2
SHS 50x50x1.5mm 3548* Galv 2
SHS 50x50x1.5mm 3147 Galv 3
SHS 50x50x1.5mm 3084 Galv 2
SHS 50x50x1.5mm 3055* Galv 2
SHS 50x50x1.5mm 2959 Galv 4
SHS 50x50x1.5mm 2900 Galv 4
SHS 50x50x1.5mm 2896 Galv 9
SHS 50x50x1.5mm 2733* Galv 2
SHS 50x50x1.5mm 2163 Galv 2
SHS 50x50x1.5mm 1255 Galv 2
SHS 50x50x1.5mm 1241 Galv 2
SHS 50x50x1.5mm 613 Galv 2
SHS 50x50x1.5mm 609 Galv 2
SHS 38x25x1.2mm 3217 Galv 3
SHS 38x25x1.2mm 3029 Galv 4
SHS 38x25x1.2mm 2970 Galv 6
SHS 38x25x1.2mm 2966 Galv 9
SHS 38x25x1.2mm 2023 Galv 2
SHS 38x25x1.2mm 1852 Galv 2
SHS 38x25x1.2mm 1325 Galv 2
SHS 38x25x1.2mm 1311 Galv 2
SHS 38x25x1.2mm 1278 Galv 4
SHS 38x25x1.2mm 1000 Galv 2
SHS 38x25x1.2mm 683 Galv 2
SHS 38x25x1.2mm 679 Galv 2
SHS 38x25x1.2mm 442 Galv 6
SHS 38x25x1.2mm 80 Galv 2
SHS 38x25x1.2mm 68 Galv 3
KWIKTECH KITS
ITEM QUANTITY RESELLER RPICE
Kwiktech DIY Rated Shed Kit (NOTE: Some items will not be used) 2
1
2 3
4
5 6
87
9
10
11
12
13
14
15
16
18
19
20
21
22
23
24
E
A
F
G
B
B
C
D
D
C
J
E
25
26
27
28
A
F
*NOTE: If xing the shed on existing concrete, reduce these member lengths by 600mm.
29
H
H
I
I
30
G
31
32
17
J
(Displacement plates
both ends)
(Displacement plates
both ends)
(Displacement plates
both ends)
(x4 used for temporary
corner braces)

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 3
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Materials
List
NON KWIKTECH ITEMS
ITEM ID # LENGTH COLOUR QUANTITY RESELLER RPICE
TrimDek Cladding 762x29 - Roof Front 3275
Customers
Choice
4
TrimDek Cladding 762x29 - Front Outers Back 3000 2
TrimDek Cladding 762x29 - Side 1 Side1 3000 2
TrimDek Cladding 762x29 - Side 2 Side2 2875 2
TrimDek Cladding 762x29 - Side 3 Side3 2750 2
TrimDek Cladding 762x29 - Side 4 Side4 2625 2
TrimDek Cladding 762x29 - Back Roof 2500 4
TrimDek Cladding 762x29 - Door Doof 2165 2
TrimDek Cladding 762x29 - Front above Door 825 2
Roof Sides Flashing 3310 2
Peak Flashing 3170 1
Front Corners Flashing 3000 2
Back Flashing 3100 1
Back Corners Flashing 2510 2
Door Frame Housing Flashing 2172 2
Door Side Flashing 2165 2
Above Door Flashing 1590 1
Door Lock Flashing 48 Galv 1
Internal Door Frame Flashing 1518 Customers
Choice 1
100x100x2.5 Zinc Plated Butt Hinge 100 Galv 3
VATER Tee Handle Kit & Inside Latch - - 1
Tek Screw 16mmx10g Coloured 16 Customers
Choice
400
Tek Screw 45mmx12g Coloured - Neo 45 200
M12x75 4.6 Hex head Galv Bolt & Nut . 75 Galv 10
P1326H Ninety Degree Fitting HG 105 Galv 20
Dynabolt DP12100 M10 12x100 Galv 100 Galv 20
38x25 Black Plastic Post Cap 38 Black 2
Sub-Total
GST
Shipping
Total Cost
RF 1
CL 1
CL 2
CL 3
CL 4
CL 5
CL 6
CL 7
CL 8
FL 1
FL 2
FL 3
FL 4
FL 5
FL 6
FL 7
FL 8
FL 9
Refer to
page 28 for
details
Only
required if
fixing to
existing
concrete.
FL 10

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 4
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
KWIKTECH FIXINGS & ACCESSORIES
ITEM QUANTITY ITEM QUANTITY
Post Connector (KT-P-001) 010G x 16 Self Drilling Wafer Head Screw 900
Universal Connector (KT-P-002) 94 M6 x 40 Socket Head Cap Screw - Zinc 94
Rail Inserts (KT-P-003) 88 M6 x 20 Hex Head Bolt - Galv 0
60° Rail Inserts (KT-P-004) 6M6 Nut - Galv 0
Star Picket Guide (KT-P-005) 0Kwiktech 2mm Displacement Plate 22
Post Cap (KT-P-006) 0Right Angle Bracket - Zinc 2
Tension Strapping 0.8 x 30 x 85mm 12 Assembly Wedge - Rubber 1
Tension Strapping 0.8x 30 x 95mm 20 10G x 16 Self Drilling Small Head Flat Top Screw 160
Tension Strapping 0.8 x 30 x 135mm 0
Tension Strapping 0.8 x 30 x 250mm 4
Materials
List
HOLLOW METAL
ITEM TOTAL LENGTH
Duragal 75x50x2.0mm 6m
Duragal 50x50x1.5mm 96m
Duragal 38x25x1.2mm 93m
FOR
INFORMATION
ONLY
Rail Inserts Extra Strong Rails Universal
Connectors
Door Stopper Footing
Preparation
Fabricate Cladding & Flashings
(Grab a mate for a hand)
Erect & Fabricate
(Grab 2 mates for a hand)
Finished Product
Assembly Sequence
Build Preparation

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 5
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Member
Locations
23
26
32
31 30
NOTE: Some member ID’s hidden for clarity.
1
1
2
3
4
5
8
6
7
9
11
12
12
14
15
16
E2
A
F2
B
C
J
H
A
17
9
C
I
11 E
D
10
11 E1
G
D
10
D
10
11 E
D
10
F1

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 6
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Rail
Assembly
Standard 60°
RAIL INSERT TYPES
Rail Setup
Refer to build guide for
assembly details.
All members have a Standard
insert unless otherwise noted.
Mark item ID on each member.
3217mm
x 3
18
60°
60°
60°
3029mm
x 4
19
2970mm
x 6
20
2966mm
x 9
21
2023mm
x 2
22
1852mm
x 2
23
1325mm
x 2
24
1311mm
x 2
25
1278mm
x 4
26
1000mm
x 2
27
683mm
x 2
28
679mm
x 2
29
442mm
x 6
30
80mm
x 2
31
68mm
x 2
32
Note: Member ID
does not have
Rail Inserts.
22
Approximate time
required: 2 Hours

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 7
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Rail Setup
Refer to build guide for
assembly details.
Mark assembly ID
on each member.
Extra Strong
Rail Assembly
MEMBER ORIENTATION
38x25 in the
Top Left Corner
ENDS FIXING DETAIL ENDS FIXING DETAIL
4 screws from
50x50 into 38x25.
100mm spacing,
both ends
Screw 10mm
from end of
50x50
35mm
&
is now
x3
B
418 &
is now
x4
C
919 &
is now
x4
D
10 20 &
is now
x9
E
11 21 &
is now
x2
F
12 27
&
is now
x2
J
16 28
Align
edge
&
is now
x2
A
1 20
Use spare member
as a spacing wedge to
position the 38x25
inside the 75x50
&
is now
x2
H
14 24 &
is now
x2
I
15 25
&
is now
x2
G
17 29
Align
edge
32
32
F1
F2
Approximate time
required: 3 Hours

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 8
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Universal
Connector
Locations LOAD
DISPLACEMENT
PLATE
Front Right Post
1506
2798
39
1450
1394
745
2798
1450
745
689
86
2
00
Front Left Post
1506
2798
1450
1394
745
86
39
2798
1450
745
95
3
0
0
Plate
1506 1506
Approximate time
required: 1 Hour
Plate
Plate
Plate
Plate
Plate
Plate
Plate
Plate
Plate

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 9
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Universal
Connector
Locations
Back Right Post
7
0
251 251
307
64
0
957 957
2249
2305 2305
2249
Back Left Post
8
251
307
64
0
957
2305
2249
2305
957
251
0
901
1013
307
Approximate time
required: 1 Hour
Plate
Plate Plate
Plate
Plate
Plate
Plate
Plate
Plate
Plate
LOAD
DISPLACEMENT
PLATE

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 10
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Universal
Connector
Locations
Roof Left Roof Right
5 6
980
0
1036
28
2046
2102
3054
0
126
1546
2978
0
126
1546
2978
980
0
1036
28
2046
2102
3054
Approximate time
required: 0.5 Hours

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 11
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Predrill x2 Pilot
Holes 3.5mm
.
Universal
Connector
Locations
Roof Front Roof Back
A A
881
0
2019
881
0
2019
Predrill x2 Pilot
Holes 3.5mm
.
Predrill x2 Pilot
Holes 3.5mm
.
Predrill x2 Pilot
Holes 3.5mm
.
Approximate time
required: 0.25 Hours

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 12
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Universal
Connector
Locations
Door Frame
Left Post
Door Frame
Right Post
F1 F2
635
0
1983
635
0
1983
1863 1863
Approximate time
required: 0.25 Hours
Plate Plate
Note: Remove 7th screw
before fitting Universal
Connector
LOAD
DISPLACEMENT
PLATE

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 13
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Door Frame
Stopper
Pre-drill door
Stoppers
15mm
28mm
Insert post caps bottom
end of item 22
Approximate time
required: 0.75 Hours
15mm
Screw through the
38x25 into the
50x50 with wafer
head screws
Predrill x7 3.5mm pilot
holes on one side of the
38x25 only. Then drill the
holes out to 13mm
Note: Recommend using
C-Clamps for assistance with
drilling & fixing
Door Frame
Left Post
28mm
Door Frame
Right Post
F2
28mm
F1
350
50
650
950
1250
1550
1850
350
50
650
950
1250
1550
1850
2222
00

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 14
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Universal
Connector
Locations
Door Left Post Door Right Post
13 13
0
28
422
1741
2135
0
28
422
1741
2135
Note
orientation
Note
orientation
Approximate time
required: 0.25 Hours

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 15
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Universal
Connector
Locations
Front Mounting Member
x 1 (Now Label )
E1
0
682
2214
Side Bracing Member
x 2 (Now labled )
E2
0
1448
Predrill x2 Pilot
Holes 3.5mm
.
E2E1
Use members
E
Approximate time
required: 0.25 Hours
Predrill x2 Pilot
Holes 3.5mm
.
Predrill x2 Pilot
Holes 3.5mm
.

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 16
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Ground
Fixing Details
600
Primary Post Fixing Method
600mm embedment into ground x
either 450mm diameter OR 400mm
square hole.
Concrete minimum compressive
strength of 15 MPa.
(Applies to both fixing scenarios)
Secondary Post Fixing Method
Assumed existing slab to be minimum 100mm thick &
in sound structural condition.
L Bracket fixed to posts via m12x75 4.6 Hex Head Galv
Bolt/Nut. Use a 13mm metal drill bit to drill hole.
Fixed into concrete with 4 x Dynabolt DP12100GH
M10 12x100mm Galv Hex Nut, 70mm min edge
distance. Use a 12mm masonry drill bit to drill hole.
37
85
Corner posts have L brackets
all 4 sides.
Door posts only have 2 on the
front & back.
Existing slab
L Bracket drilling
dimensions for post based
off flat level surfaces.
Recommend marking and
drillings holes after
framework has been
erected if the surface
is not level.
Use a 13mm metal drill bit
to drilll hole.

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 17
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Ground
Fixing Details
Hole measurements
All measurements from center of hole
3050
3050
763
4313
400mm
square hole
or 450mm
diameter hole
475
Right Angle Bracket Holes
Measurements from center
of hole to center of right
angle bracket holes
92
46
1524

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 18
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Assembly
Sequence
3
8
E
E2
C
B
E
Build Left Wall
Construct on the ground.
(Images show frames upright for clarity)
E2
E
B
11.25°
0°
C
0°
11.25°22.5°
22.5°
Step 1
Attach 3 rail items below
Step 2
Attach 2 rail items below
Approximate time
required: 0.25 HourS

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 19
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Assembly
Sequence Step 4
Fix tension strapping to framing
Build Left Wall
Construct on the ground.
(Images show frames upright for clarity)
5
30 31 250 Strap
250 Strap
31 33.75°
45°
30
11.25°
0°
32
60°
45°
Step 3
Attach 4 rail items below
32
Approximate time
required: 0.5 HourS
85-95 Strap
85-95 Strap
85-95 Strap
85-95 Strap
85-95 Strap
85-95 Strap
85-95 Strap
85-95 Strap
85-95 Strap
85-95 Strap

Engineered by
Rating: Region C
Rev 2
This Manual is the sole property of
Kwiktech Pty Ltd.
All rights are reserved.
This Manual is designed to be only
used with Kwiktech
produced products.
No part of this Manual or the
Kwiktech product design may be
copied or reproduced without the
consent of Kwiktech Pty Ltd.
Construction using Kwiktech
products may require planning
approval. Always contact your Local
Council for the most up-to-date
rules and regulations for your area.
All dimensions are in millimeters
(mm)
User Manual
Read in conjuction with
Kwiktech Build Guide and
Kwiktech Trouble-Shooting
www.kwiktech.com.au
Page 20
3m x 3m x 3m Shed
Region C
Designed by
© Kwiktech Pty Ltd 2021
Build Right Wall
Assembly
Sequence
Finished Sides
Right side assembly steps the
same as the left but mirrored.
Step 6
Repeat previous steps for right wall
Step 5
Left wall finished
2
7
6