Lab.gruppen FP+ Series FP 7000 User manual

Item no. CDTD_FP7000_V4
Lab.gruppen ab •Sweden
internationaL contact • [e-mail] | uS contact • [e-mail]
www.labgruppen.com
-10dB
-inf 0
-10dB
-inf 0
Bchannel
channel
A
FP SERIES
VHF
TEM
VHF
TEM
channel A
-20 -15 -10 -4 VPL CPL
channel B
-20 -15 -10 -4 VPL CPL
BRIDGE A+B
SIG
SIG
PWR
P A L
NOMAD
LINK
MUTE
MUTE
CLIP
CLIP HI-IMP
HI-IMP
FP7000
R
P O W
P O W
The following tables contain information on measured current consumption as well as calculated heat dissipation during normal operation
(1/8 rated power); and during extreme heavy duty operation (1/4 rated power).
Current Draw and Thermal Dissipation
FP+ Series: Dedicated Touring Amplifiers
FP 7000
FP 7000
Level Load Rated Power Line Current *2) Watt *1) Thermal Dissipation
115 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr
Standby, with remote power off via NomadLink 0 0 0 0 0
Powered on, idling 92 092 316 80
Amp (I) Watt
Pink noise (1/8
rated power)
16 Ω/ Ch. 730 x 2
6.8 3.4 411 183 229 781 197
32 Ω/ Bridged 1460 x 1
8 Ω/ Ch. 1450 x 2
10.8 5.4 692 363 329 112 3 283
16 Ω/ Bridged 2900 x 1
4 Ω/ Ch. 2800 x 2
17.4 8.7 1176 700 476 1625 409
8 Ω/ Bridged 5600 x 1
2 Ω/ Ch. 3500 x 2
22.0 11.0 1518 875 643 2195 553
4 Ω/ Bridged 7000 x 1
Pink noise (1/4
rated power)
*3)
16 Ω/ Ch. 730 x 2
19.6 9.8 800 487 313 1070 270
32 Ω/ Bridged 1460 x 1
8 Ω/ Ch. 1450 x 2
33.3 16.6 1455 967 489 1667 420
16 Ω/ Bridged 2900 x 1
4 Ω/ Ch. 2800 x 2
39.4 19.7 2705 1867 838 2860 721
8 Ω/ Bridged 5600 x 1
2 Ω/ Ch. 3500 x 2
39.4 19.7 3088 2333 754 2574 649
4 Ω/ Bridged 7000 x 1
Mains connector, 230 V CE version 16 A, CEE7
Mains connector, 115 V ETL version 30 A, Nema L5 -30P Twist lock
*1) The amplifier’s PSU operates as a non-resistive load, so the calculation “Volts x Amps = Watts” would not be correct. Instead, measured and
specified here is what is known as the “Active Power” of the amplifier providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw figures measured at 230 V. 115 V figures are 230 V figures multiplied by two.
*3) Figures measured at maximum power before amplifier protection and limiter features are engaged. Typically this is between 1/4 and 1/3 of rated
power. Note that the max. power condition is very extreme and will not occur during normal operation. Also note that the mains breaker will not be
tripped even if operation is in excess of max. ratings.