Lang TH-SHORTY-60-6 User manual

TH-SHORTY-60-6
INSTALLATION MANUAL
for frames:
Epson ELPMB50
Panasonic ET-RFD91 / ET-RFD91-li
Important safety notice
Product description
Maximum weight load information
Installing the truss mount
Adjustment options
Dimensions
2
3
3
4
4
5
Only a qualied installer should install this product.
Read these instructions carefully before installing this product.
The frames and projectors shown in the pictures of this manual only serve as an example.
The design of the frame and projector you are using may vary.
These installation instructions must always be handed over to the installing person.

IMPORTANT SAFETY NOTICE
Dear customer,
Thank you for choosing the TH-SHORTY-60-6 truss mount.
This instruction booklet provides you with all the necessary operating information that you may
require. It will help you to get the best performance out of this product. We hope you
will be pleased with your truss mount.
Model number: TH-SHORTY-60-6
2.
Important safety notice
Product description
Maximum weight load information
Installing the truss mount
Adjustment options
Dimensions
SAFETY PRECAUTIONS
Please consider the valid laws at the place of event.
WARNING
Installation work should only be carried out by a qualied technician.
- If this product is not installed correctly, serious accidents may result.
The maximum weight load for one TH-SHORTY-60-6 is 60 kg (132,28 lb.)
- Do not exceed the maximum weight load in ceiling mount congurations.
CAUTION
Do not install the truss mount and suspend the frame in a place
which may impede projector ventilation.
- If this is not observed, re may result.
Do not set up the projector in humid or dusty places or in places where the projector may
come into contact with oily smoke or steam.
- Using the projector under such conditions may result in re, electric shocks or plastic deterioration.
Minimum 2 people are required to install a frame with the TH-SHORTY-60-6.
- With regard to the overall weight of all necessary installation devices, make sure to handle
those with at least 2 people.

PRODUCT DESCRIPTION
3.
Truss mount Used for ceiling
mount installations
Purpose Finished assembly diagramImageParts name
MAXIMUM WEIGHT LOAD INFORMATION
TH-SHORTY-60-6
Epson ELPMB50
Panasonic ET-RFD91 / ET-RFD91-li

INSTALLING THE TRUSS MOUNT
Place the truss mount on the rear side
of the frame. Make sure that the 4 screws
enter the 4 holes in the frame. Tighten
the screws to secure the truss
mount on the frame.
ADJUSTMENT OPTIONS
4.
By means of the 4 adjustment screws,
the positon of the truss mount can be dened
very precisely.
ne adjustment screws
When turning the handle on the truss mount,
it becomes mobile and can be rotated by 360°.
handle
360°
The inclination angle can be adjusted by 10% at the
upper part (rough adjustment) and by 2% at the
lower part (ne adjustment).

5.
DIMENSIONS
259.3 mm / 10.20 inches
159 mm / 6.25 inches
119.3 mm / 4.69 inches

Made in Germany
for
by Sager Metallbearbeitung
www.lang-ag.com
12/16