Laser Corporation Pty Tech Pets T4P-WATER-F2L User manual

2L Smart Water Fountain
T4P-WATER-F2L
User Manual

SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

WHAT’S IN THE BOX
• 2L Water Fountain
• USB Power Cable
• AC Power Adapter
• Filter
• User Manual

App: Laser SmartHome
Software Requirements: iOS 7.0 or Android 4.4
and higher
Water Capacity: 2L
Dimensions: 190 x 190 x 160mm
Wireless Technology: Wi-Fi 2.4GHz
(5GHz not supported)
Power: 5V/1A
SPECIFICATIONS
Weight: 736g

PRODUCT DIAGRAM
Top Cover
Mechanical
Filter Slot
Water Tank
Power Interface
Reset Button
Indicator
Light
Body

RESET BUTTON
CONTROLS
• Press and hold the Reset button for 10 seconds
for network pairing mode. The Indicator Light
will flash BLUE.
Note: In this manual we cover the EZ pairing
mode instructions.
• Fast Flashing = EZ pairing mode.
• Slow Flashing = AP pairing mode.
There are 2 flashing states

GETTING STARTED
WITH THE APP
1. Install the Laser SmartHome
App for your Smartphone from
the iOS App Store or
Google Play Store.
2. Log in with an existing
Laser SmartHome account
or create a new account.

CONNECTING
TO THE APP
1. Turn on the Bluetooth
function on your Smartphone.
2. Press and hold the Reset button
on the Pet Feeder for 10 seconds
till you get a fast-flashing
BLUE light. If the light is
flashing slowly, press
and hold the button
again till you get the
fast-flashing version.

3. Open the Laser SmartHome
App and tap the “+” icon to
add a device.
CONNECTING
TO THE APP
continued...
4. Select “Add” under
“Discovering Devices”.

5. Tap the “+” icon next to
the Water Fountain.
CONNECTING
TO THE APP
continued...
6. Enter your Wi-Fi details.

7. Wait for the Water Fountain
to finish pairing.
CONNECTING
TO THE APP
continued...
8. When finished pairing the
device will appear on the
Laser SmartHome App
home screen.

NOTE: If you are unable to
pair successfully with
the Water Fountain,
please check your
Wi-Fi password and
make sure you are only
using a 2.4GHz Wi-Fi
connection. 5GHz
connections are
not supported.
CONNECTING
TO THE APP
continued...

1. Lift the top cover.
Note: Do not use hot or boiling water.
2. Fill the water tank
with water.
FILLING THE
WATER FOUNTAIN

USING THE
WATER FOUNTAIN
Turn water
pump ON/OFF Switch between
Normal and Smart
mode
Note: Smart mode turns the water pump on
and off every 5 minutes
Device
settings

Filter replacement
notice. Tap to reset
USING THE
WATER FOUNTAIN
Clean water fountain
notice. Tap to reset
Turn UV light
ON/OFF
continued...

We recommend replacing the water every 2-3 days, and cleaning
the water tank at least once a week.
1. Remove the top cover
and clean both sides.
3. Clean the filter slot
and filter.
5. Clean the inner walls of the
water tank and dry the outer
body thoroughly of any moisture.
Pay special attention to the base
and power interface areas.
4. Clean the water pump
and surrounding areas.
6. Replace the filter slot
and filter.
2. Carefully remove
the filter slot and filter.
CLEANING THE
WATER FOUNTAIN

TROUBLESHOOTING
• Check the water tank has enough water. You
should receive a “Water Lack” notification on
the Laser SmartHome App when water is low.
• Check the water pump and water inlet pipe for
any blockages or dirt.
• Clean the water pump and water inlet pipe.
• Check the network connection of the
Water Fountain with the Laser SmartHome App.
Why is water flow not working?

• Turn ON the Bluetooth function on the smartphone
you are connecting to.
• Check the Water Fountain has a fast-flashing
BLUE light. If the light is flashing slowly, press
and hold the Reset Button for 10 seconds to
switch to a fast-flashing light.
• Check you are only connecting to a 2.4GHz
Wi-Fi network. 5GHz networks are not supported.
• Check the Wi-Fi password you are using is
correct. If unsure, try connecting another device
to the same Wi-Fi network using that password.
If that device fails to connect also then you may
be using an incorrect password.
TROUBLESHOOTING
The Water Fountain is not
connecting to the App.
continued...

www.laserco.com.au
Check us out at
www.youtube.com/lasercoau
Visit our website