Lattice Amber X AL11 User manual
01 Prepare your device and accessories
Amber X connects to a router with a Ethernet cable. Use mobile device to
setup.
Quick Start Guide
03 Amber X can connect to the Internet with wired or wireless connection. Please choose one of the following methods
We recommend using the Amber iX app on your mobile device to setup Amber X.
This product requires Internet connection. Please confirm you have wired or wireless
network environment for Amber X to connect to.
02 Before Setup
A.
B.
Connect Ethernet port from the Amber X unit to the LAN port of your router. Plug-in
your Amber X unit and press the power button. You will hear a beep sound meaning
Once the light begins blinking yellow or blue, you’re ready for setup.
Turn on the WiFi function of mobile device and connect to the router.
Launch Amber iX app.
Sign up AmberCloud account and follow instructions in the app to finish setup.
A.
B.
C.
D.
E.
Option 1
Amber X connects to a router wirelessly. Use mobile device to setup.
Next page
Plug-in your Amber X unit and press the power button. You will hear a beep sound
Once the light begins blinking yellow or blue, you’re ready for setup.
Turn on the WiFi function of mobile device and connect to the router. Prepare WiFi
Get your mobile device closer to Amber X and enable the Bluetooth on your mobile
device. Launch Amber iX app.
Sign up AmberCloud account and follow instructions in the app to finish setup.
A.
B.
C.
D.
E.
選項 2
Amber X Unit Power Adapter (incl.)
A
B
LAN
A
B
Home or Office
WiFi Router
Option 2
Amber iX
Troubleshooting Information
To reboot Amber X, firmly press the power button for 5 seconds. Wait until the LED
indicator is completely off then press the power button to restart.
To enter troubleshoot mode, firmly press the power and reset buttons together for 10
seconds. This will enable you to upgrade or reinstall the Amber X OS.
For product registration, warranty or technical information please visit the Amber
support portal at: https://support.myamberlife.com.
A.
B.
C.
Amber X connects to a router with a Ethernet cable. Use PC or laptop to
setup.
http://latticenode.local/#finder
to find your new Amber X by checking the LAN MAC that printed on the bottom of Amber X.
Once the light begins blinking yellow or blue, you’re ready for setup.
“ http://latticenode.local ” to connect to Amber X.
Connect Ethernet port from the Amber X unit to the LAN port of your router. Plug-in
your Amber X unit and press the power button. You will hear a beep sound meaning
A.
B.
C.
Follow instructions on the UI to finish setup.
D.
If you have any trouble or issues, please check our support website:
https://support.myamberlife.com。
LED Status Indicators
Wireless or wired
LAN
Properly use your product
Keep away from heat
Don’t use with Passive PoE
switch or router
802.3af/at/bt compliant. Connect to such equipment can
damage either device, including fire risk.
No closed or high
temperature env
Passive PoE
FCC ID: 2AP7A-AMBERX
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following
measures:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator & your
body.
Note: The country code can’t be changed. Per FCC
regulation, all WiFi products marketed in US must be
fixed to US operation channels only.
receiver.
different from that to which the receiver is connected.
technician for help.
FCC Caution:
by the party responsible for compliance could void the
user's
authority to operate this equipment.
conjunction with any other antenna or transmitter.
The product contains components that can be
the chance of ESD damage, work over a non-carpeted
floor, use a static dissipative work surface (such as a
connected to a grounded surface.
CAUTION
2210 O’Toole Ave, Suite 250, San Jose, CA 95131, USA
Option 3
Blinking Blue: No Internet Connection
Blinking Red: System Errors
Blinking Yellow: Ready for set up
Solid yellow: Bluetooth Connection Timed Out
Solid Blue: All Systems Normal
Blink White: Booting UP / Shutting Down
Amber X
Model: AL11
Popular Network Storage Server manuals by other brands
IBM
IBM TotalStorage DS4100 Installation, user's, and maintenance guide
Seagate
Seagate Business Storage 1-Bay NAS Administrator's guide
Acer
Acer Aspire EasyStore Series user guide
D-Link
D-Link DSN-6020 Brochure & specs
Lenovo
Lenovo ThinkAgile CP Part Replacement and Component Maintenance Procedures
NETGEAR
NETGEAR ReadyDATA 5200 installation guide
Seagate
Seagate ST320005SHA10G-RK - BlackArmor NAS 420... user guide
Iomega
Iomega 34571 - Home Media 2 TB Network Attached... quick start guide
American Megatrends
American Megatrends StorTrends 2104 user guide
Dell
Dell DCS-1130 Setup and features information
Seagate
Seagate 8-BAY RACKMOUNT NAS user manual
Dell EMC
Dell EMC NX440 Installation and service manual