Le Feu Turtle 830003 User manual

Assembly guide Le Feu Outdoor Table
1. Place the topplate (No.5) upside down, place it on a blanket or similar to avoid scratches.
Make sure the two holes for the handle is poinng towards you.
2. Mount the four corners to the top plate.
Corner No. 2 is the one with the magnets.
Corner No. 3 is the two corners with 4 bushes.
Corner No. 4 is the one with only two bushes.
Use 8 pieces M6 ange nuts to fasten the corners to the top plate.

3. Mount boom plate (No. 1) use 8 pieces M6 ange nuts to fasten the boom plate to the corners.
Make sure that the two small Ø5 holes for the door is poinng towards you.
4. Mount the four wheels to the brackets on the boom plate, the two wheels with brakes in the front.
Use 16 pieces M6x12 bolts and 16 pieces M6 ange nuts.

5. Turn the table around so it stands on the wheels. Mount the handle in the two holes in the top plate.
Use 2 pieces M8x10 screws (packed together with the handle)
6. Mount the two side plates and the back plate. (All three plates are idencally)
Use 12 pieces M6x16 and 12 pieces M6 ange nuts.

7. Mount the small pin in the small hole in the boom plate (le side)
Put the small rubber washer on the pin, this will avoid sound when opening and closing the door.
8. Mount the door on the pin in the boom plate, push down the spring in the top and x it in the hole in the
top plate using your nger.

9. If you want the hose to go down in the table, remove the brick in the top plate and mount the big rubber
ring in the top plate.