Leader Light LL STREET PT60 User manual

©MMXII - LEADER LIGHT – All right reserved Edition: A - 2012 Additional information on [email protected]
LEADER LIGHT s.r.o.
M.Gorkeho 33
052 01 Spisska Nova Ves
Slovakia
www.leaderlight.eu
USER MANUAL
LL STREET PS60/PS90/PT60/PT90
COMPLIMENTS ON YOUR PURCHASE!
All dimensions are in millimeters
Package includes:
LL STREET- 1pc.
User manual- 1pc.
Additional items needed:
Power cable-
Mounting accessories as necessary-
Content:
01 SAFETY INFORMATION
01.1 Risk of eyes damage
01.2 Safety instructions
01.3 Fire protection
02 PRODUCT SPECIFICATION
02.1 Technical speci cation
02.2 Product description
03 INSTALLATION
03.1 Unpacking
03.2 Physical installation
03.3 Connection
04 MAINTENANCE AND SERVICE
Symbol Pin Wire Colour Screw (US)
Llive brown yellow or brass
Nneutral blue silver
ground (earth) yellow/green green
!
Page 1 /2
ENVIRONMENTAL PROTECTION
Do not throw away the appliance with the normal household waste at the end of its
life, but hand it in at an of cial collection point for recycling. By doing this, you help to
preserve the environment.
01 SAFETY INFORMATION
WARNING!!!
Carefully read before installing, powering or servicing. Nothing to do if
anything misunderstand! Installation can be done only by a quali ed
professional in accordance with relevant local codes.
01.1 Risk of eyes damage
Do not look directly into LED lamps.
Do not look into light beam from a distance of less than 40 cm (16 inches)!
-
-
01.2 Safety instructions
Shut down power before installation or maintenance.
Do not modify, alter, or attempt to service the LEADER LIGHT appliance. Doing
so will void the warranty.
Appliance and recommended AC power supply must be installed by a quali ed
professional in accordance with relevant local codes. Use only acceptable source
of AC power and frequency that complies with local biulding and electrical codes.
Use only the recommended voltage source.
Appliance always connect to earth (eltech.)!
Do not use or do not connect the products if the power cable, power plug or
 xtures are any way damaged, wet, or if they are overheating.
Before removing or installing any cover or part of appliance disconnect it from AC
power.
AC power supply must be protected against overvoltage and short circuits.
-
-
-
-
-
-
-
-
01.3 Fire protection
Follow all safety restrictions.
Thermostatic switches or fuses never to bypass.
Device and ventilating slots never shield. Around the axis of the  tting (180°) must
be maintained space for cooling. Minimum distance from the surrounding objects
must be 100mm (4 in.).
LEDs never direct cover with  lters or other materials.
Allowing max. ambient temperature is 40°C (104°F).
-
-
-
-
-
02 PRODUCT SPECIFICATION
02.1 Technical specifi cation
Lamp source 7/ 14x LED
Max. input power 30W,20W/ 60W ,45W
Optic Special street LED optic
Colour Rendering
Index (CRI)
> 75
Lifetime 75.000 hours (70% lumen maintenance at Ta=25ºC)
Power connection AC90-264V, 47-63Hz
Light Colour
temperature
Standard: 6.000K; Optional:3.200K, 4.500K, 5.600K
Ambient temp. (Ta) Standard: -30ºC<Ta< 40ºC; Option COLD: -40ºC<Ta< 40ºC
Option HOT: -30ºC<Ta< 55ºC
Weight 2,80kg/ 4,80kg
Cooling Conventional
Materials and  nish Natural anodized aluminium
Installation Side/Top pole entry: Ø 60 mm
!
610 120
910 120
Assembling door -
for Power connection
Ø 60 mm
Ø 60 mm
02.2 Product description
03 INSTALLATION
03.1 Unpacking
Unpack carefully.
This is electronic equipment and should be handled carefully.
Damaged delivered package or if are any mechanical parts broken – it must be
claim immediately by the transport company. Photo pictures as evidence are
valuable for future claim.
-
-
-
03.2 Physical installation
On the standard Ø 60mm pole with top/side entry.-
03.3 Connection
Respect all SAFETY INFORMATION 01!
Connect the ground (earth) !
It is necessary to open the Assembling door before power supply ! Power supply
is solved simple with Wago connector.
The  xture is equipped with auto-switching power supply that automatically
adjusts to any 47-63Hz AC power source from 90-264V.
Cord plug connections:
-
-
-
-
-

©MMXII - LEADER LIGHT – All right reserved Edition: A - 2012 Additional information on [email protected]
Page 2 /2
04 MAINTENANCE AND SERVICE
Before any maintenance is necessary to carefully read all SAFETY INFORMATION 01!
Damages caused by inadequate cleaning or maintenance are not covered by warranty.
Requires occasional cleaning (dust, dirt ,...)
Procedure for maintenance:
Unplug mains before maintenance and at least 10 minutes cool off.
Appliance do not illegal open or demount.
Clean-up dust only from outer surface.
Service:
Customer service provided by the manufacturer.
-
-
-
-
-
-
-
!
1. Mechanical mounting of LL STREET PS/PT
4
1
2
2
Open the Assembling door and make the power
connection simple with Wago connectors.
The door is protected from falling out.
Fix the xture to the pole with Allen key.
3
Close and x the Assembling door.
4
37
4
1
7
2
7
4
7
3
44
90V
~
264V
IP67