Lefroy Brooks M2-1212 User manual

Size: 215.9*279.4mm K 100%
INSTALLATION INSTRUCTIONS
M2-1211
FLEETWOOD CROSS HANDLE MONOBASIN
M2-1212
FLEETWOOD LEVER MONOBASIN
M2-1212M2-1211
20
21
22

2
Dimensions in Inches (& Millimetres)
Whilst every effort is made to ensure accuracy, design and dimensions are subject to
change without notice as part of the company’s product development process.
M2-1211
(143mm)
(1mm-50.8mm) (296.7mm)
(Ø19mm)
(165mm)
(Ø60mm)
(104.2mm)
(174.6mm)
(Ø31.8mm)
5 5/8"
1/16"-2" 11 11/16"
Ø3/4"
6 1/2"
Ø2 3/8"
4 1/8"
6 7/8"
Ø1 1/4"
2- 9/16-24UNEF-2B
20
21
22

3
Dimensions in Inches (& Millimetres)
Whilst every effort is made to ensure accuracy, design and dimensions are subject to
change without notice as part of the company’s product development process.
M2-1212
5 3/4"
6 1/2"
6 7/8"
Ø2 3/8"
1/16"-2"
Ø1 1/4"
2-9/16-24UNEF-2B
4 1/8"
Ø3/4"
11 1/16"
(145.5mm)
(165mm)
(174.6mm)
(Ø60mm)
(1mm-50.8mm)
(Ø31.8mm)
(104.2mm)
(Ø19mm)
(296.7mm)
20
21
22

4
What you need to know
Adjustable Wrench
Groove Joint Pliers
Hacksaw
Phillips Screwdriver
Pipe Tape
Spatula
Spirit Level
Your new bathroom faucet is designed for years
of trouble-free performance.
Keep it looking new by cleaning it periodically with
a soft cloth. Avoid abrasive cleaners, wire wool and
harsh chemicals as these will dull the finish and
void your warranty.
If you are soldering during faucet installation,
remove cartridges, seats, gaskets and washers
prior to applying flame, otherwise you will void
the warranty.
Cover drain openings to avoid losing small parts.
When cutting or soldering pipe, use safety glasses
to protect your eyes.
Correct installation may vary depending on previous faucet installation. All necessary supplies required for
faucet installation are not included, but may be found where plumbing supplies are sold. It is suggested that
IAPMO and/or CSA approved plumbing supplies are used during installation.
Prior to beginning installation. turn off the cold and
hot water lines and open the old faucet to release
built-up pressure.
Overtightening nuts may cause damage.
Wrap all threaded connections with pipe tape
available at your local plumbing supply store.
Always wrap in a clockwise direction. The fittings
should be installed by a state-licenced plumber.
Tools: Maintenance
SafetyTips
ThingsYouMayNeed
ImportantPoints
IAPMO/cUPC Listed (all variants)
Meets NSF 61-9 (all variants)
Meets A112.18.1 (all variants)
ADA Compliant (M2-1212 only)
Standards FlowRate
Please note :
Final achievable flow rate is dependent on the outlets fitted, see relevant outlets (spouts, roses, sprays) for fully
assembled product flow rate.
1
2
3
20 40 60 80PSI
20
21
22

5
Step 1-3
InstallationProcedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
13
Put the base under the bottom of faucet.
Attach the fixing bolt and flexible hoses to
the faucet.
2Install faucet through deck hole. From
underneath the sink, install the washers
and lock nut.
After installing faucet, remove aerator and
open the hot and cold supplies. Check for
leaks. Turn on faucet handle for one minute
to flush debris from faucet. Turn off the
handle and re-assemble the aerator.
2 3
1
Warning! When installing flexible hose, Please notice:
1. There should be no torsion or deformation
2. Do not fold into a V or L shape.
3. Do not use if there is any crack or deformation.
20
21
22

6
Exploded View
PartsList
M2-1211
Spout (139860W)
Oil-seal (010519N)
Aerator insert (553641N)
Aerator housing (305849W)
Allen key (031000)
Handle ( H ) (029685H)
Cartridge ( H ) (507105W)
Flexible hose (105193W)
Adaptor (067894N)
O-ring (004031N)
1
2
3
4
5
6
7
8
9
10
Collar (000096)
O-ring (004005N)
Plastic ring (200002)
Clip (012060)
Adaptor (067729W)
Clip (012112N)
Screw (008252)
Body (076168W)
Cartridge ( C ) (507106W)
Canopy (215516)
11
12
13
14
15
16
17
18
19
20
Handle ( C ) (029685C)
Set screw (292598)
Escutcheon (071489)
O-ring (004640N)
Washer (013039)
Washer (013040)
Fixing bolt (017868)
Nut (054857)
21
22
23
24
25
26
27
28
20
21
22
1
2
3
4
5
11
12
13
14
15
16
17
18
19
23
24
25
26
27
28
6
7
8
9
10

7
Exploded View
PartsList
M2-1212
20
21
22
Spout (139860W)
Oil-seal (010519N)
Aerator insert (553641N)
Aerator housing (305849W)
Handle ( H ) (069826H)
Canopy (215516)
Set screw (292598)
Cartridge ( H ) (507375W)
Flexible hose (105193W)
Collar (000096)
1
2
3
4
5
6
7
8
9
10
O-ring (004005N)
Plastic ring (200002)
Clip (012060)
O-ring (004031N)
Adaptor (067729W)
Adaptor (067894N)
Clip (012112N)
Screw (008252)
Body (076168W)
Cartridge ( C ) (507376W)
11
12
13
14
15
16
17
18
19
20
Escutcheon (071489)
O-ring (004640N)
Washer (013039)
Washer (013040)
Fixing bolt (017139)
Nut (054857)
Handle ( C ) (069826C)
Allen key (031000)
21
22
23
24
25
26
27
28
19
25
9
23
24
26
11
28
18
10
15
16
12
13
17
14
6
21
5
27
7
22
1
4
2
3
20
8

The use of trademarks, product design and artwork is subject to licence or agreement with Christo A. Lefroy Brooks. The design
registrations, trademark registrations and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited.
The right to modify designs and dimensions is reserved. Christo Lefroy Brooks is a member of ACID (Anti Copying in Design).
LEFROY BROOKS INC, 1828 TROUTMAN STREET, RIDGEWOOD, NY, 11385
TELEPHONE: [phone]. FAX: [phone]
©CHRISTO A. LEFROY BROOKS 2009
For additional a i tance or ervice call
718-302-5292
9am to 5pm EST Monday to Friday
www.lefroybrooks.com
20
21
22