Glacier bay FP4A0052BNV Assembly instructions

PULL-OUT KITCHEN FAUCET
SKU#
497-475
Model#
FP4A0052BNV
INSTALLATION AND CARE GUIDE
THANK YOU
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this kitchen
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
THD 11/2014 REV.01

Important Information.................................2
Warranty.......................................................2
Pre-Installation............................................2
Planning Installation................................2
Tools and Hardware Required..................2
Package Contents....................................3
Installation..................................................4
Operation....................................................7
Cleaning The Filter Screen ....................... 8
Care and Cleaning......................................9
Troubleshooting..........................................9
Service Parts.............................................10
Table of Contents
Warranty
Important Information
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD Glacier (1-855-434-5224)
to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD Glacier for
more details.
Pre-Installation
PLANNING INSTALLATION
Before you begin to install this product, ensure that all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service
for replacement parts.
TOOLS AND HARDWARE REQUIRED
Adjustable
Wrench Safety
Goggles
Phillips
Screwdriver
SILICONE
Sealant
Observe all local plumbing and building codes.
Cover the sink drain to avoid losing any parts.
Review the care and cleaning section included in this guide.
2

I
A
B
C
E
F
D
G
H
K*
J
NOTE: *Items come pre-assembled.
Part Description Quantity
I Base 1
J Pull-out spray hose 1
K Cover cap 1
LAllen wrench
(H4mm * 24mm L * 74mmL) 1
MAllen wrench
(H2.5mm * 11mm L * 53mmL) 1
L
M
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Faucet body 1
B Pull-out spray 1
C Outlet hose 1
D Deck plate 1
E Gasket 1
F Supply line 2
G Weight 1
H Quick connector 1
3 HOMEDEPOT.COM/GLACIERBAY

Without deck plate
With deck plate
1-1/2 in. (38 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
1 in. (25 mm) Max Deck Thickness.
Ø 1-3/8 in. (35 mm) Min.
Ø 1-1/2 in. (38 mm) Max.
8
in.
Installing the faucet with the
deck plate
Place a bead of clear silicone sealant (not included)
around the base of the gasket (E). Place the gasket
(E) and the deck plate (D) on the sink.
Rotate the two half-moon locking nuts (2) inward
before inserting the base (I) into the sink.
Insert the base (I) into the sink.
Check for the proper thickness of the sink.
Installation
2.b
2.a
Installing the faucet assembly
1
I
D
E
(2)
Rotate the two half-moon locking nuts (2) inward
before inserting the base (I) into the sink.
Shut off the water supply. Remove the old
faucet.
Clean the mounting surface.
Installing the faucet without
the deck plate
Insert the base (I) into the sink.
(2)
I
4

Small hole
Large hole
I
F
F
Tightening the base
Insert the pull-out spray hose (J) through the small
hole of the base (I).
Use one hand to hold the base (I) and the
second hand to tighten the two screws with the
allen wrench (L) until the locking nuts secure
the base (I) on the sink. Make sure the “FRONT”
mark on the base (I) faces the front of the sink
while tightening the screws.
Installation (continued)
4
I
J
F
I
L
3 Inserting the hose
NOTE: Ensure the exible hoses do not twist when inserting
them through the small and large holes in the base (I).
Insert supply lines (F) separately through the large
hole of the base (I).
5 HOMEDEPOT.COM/GLACIERBAY

Large hole I
C
C
H
J
K
Inserting outlet hose
Attaching the quick connector
Securing the faucet body
Insert the black nozzle of the pull out
sprayer hose (J) into the quick connec-
tor (H) with the black colored clip.
Insert the brass nozzle of the outlet
hose (C) into the quick connector (H)
with the white colored clip.
Pull down on the pull-out spray hose (J)
moderately to ensure the connection
is secure.
Loosen the set screw at the bottom of the faucet
body (A). Align the set screw hole at the bottom of
the faucet to the recess on the base (I) and then
set the faucet body (A) to the base (I). Ensure there
are no gaps between the faucet body (A) and the
mounting surface.
Tighten the set screw with the allen wrench (M).
Remove the cover cap (K) from the outlet hose (C).
Insert the outlet hose (C) through the large hole of
the base (I).
Installation (continued)
5
7
6
I
A
A
M
C
H
H
J
I
C
NOTE: For removal, see “Removing the Quick
Connecting Hose”.
6

Weight
Location
Decal
3
2
1
Connecting supply lines Attaching the weight
Use an adjustable wrench to connect and tight-
en the supply lines to the supply valves.
Connect the red supply line to the hot water
supply valve.
Connect the blue supply line to the cold water
supply valve.
The pull-out spray (B) should be nested in the
faucet body (A).
Use a Phillips screwdriver to secure the weight
(G) at the lowest point on the pull-out spray
hose (J). The weight (G) should cover the weight
location decal on the pull-out spray hose (J).
Pull the pull-out spray (B) away from the faucet
body (A) and ensure the pull-out spray hose (J)
is not obstructed.
Installation (continued)
8 9
F
1
RED
LINE
HOT
COLD
BLUE
LINE
1
1
G
J
CAUTION: Ensure the supply lines do not kink, twist or
bend into a “V” or “L” shape during installation. Do not use
if there are visible signs of damage.
Removing the quick connector hose
If it is necessary to remove the quick connector,
push the quick connector housing up, hold the
housing together and pull down.
Operation
CAUTION: Use caution when removing the quick
connector hose to prevent cutting your hands.
1
7 HOMEDEPOT.COM/GLACIERBAY

1 2 3 4
Cleaning The Filter Screen
1. Detach the pull-out spray (B) from the pull-out spray hose (J). Hold the pull-out spray hose (J) rm to prevent
it from retracting into the faucet body (A).
2. Flush the lter screen with water.
3. Reattach the pull-out spray (B) to the pull-out spray hose (J).
4. Turn water on to ensure water ow is no longer obstructed.
CAUTION: Debris in the lter screen may result in
irregular or low water ow. Follow these steps to clean the
lter screen located in the pull-out spray (B).
J
A
BB
BJ
Checking for leaks
Detach the pull-out spray (B) from the pull-out spray
hose (J). Hold the pull-out spray hose (J) rm to pre-
vent it from retracting into the faucet body (A).
Ensure the handle is in the off position. Turn the hot
and cold water supplies on and check all connections
for leaks. If leaks are discovered, check the connec-
tions to ensure they are tight and properly secured.
Lift the handle to allow the water to run for approxi-
mately one minute. This ushes away any debris that
could damage the internal parts.
Turn the water off and reattach the pull-out spray (B).
2
B
J
Operation (continued)
J
AA
8

Troubleshooting
Problem Possible Cause Solution
There are leaks from the
handle.
The bonnet nut is loose.
The O-ring on the cartridge is
dirty or damaged.
Tighten the bonnet nut.
Clean or replace the O-ring.
The aerator leaks or has a
reduced water ow.
The aerator is dirty or
mis-tted.
The cartridge may be clogged.
Remove the aerator and check for debris.
Ensure the aerator is properly installed.
There are leaks from the
hose underneath the deck.
The connection between the
pull-out spray and pull-out
spray hose may be loose.
Tighten the connection between the pull-out
The hose does not retract. The weight is not installed in
the correct position.
The pull-out spray hose is
obstructed.
Reinstall or readjust the weight.
The water pressure is low. The quick connector may be
clogged with debris.
Turn off the water supply and disconnect the
quick connector from the outlet hose.
Disconnect the quick connector from the pull-
out spray hose and ush under running water.
Reattach the quick connector to the outlet
Test water ow. If water pressure is still low
then replace the quick connector.
There is no hot or cold
water.
The hot or cold water supply
lines may be kinked or
twisted.
NOTE: Refer to the service parts section in this manual for
a detailed drawing showing the location of the parts listed
below.
Remove the cartridge and check for debris.
Care and Cleaning
To clean, wipe down with a damp cloth and towel dry.
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
Check under the sink to ensure the pull-
out spray hose is not obstructed.
Ensure hot and cold water supply lines are
not kinked or twisted. Reinstall the supply
line if necessary.
hose.
spray and pull-out spray hose.
9 HOMEDEPOT.COM/GLACIERBAY

3.
1.
4.
5.
8. 10.
6.
11.
9.
13.
12.
7.
2.
Faucet ID Tags can
be found on the hot
supply line
DATE CODE：
DO NOT REMOVE
1-888-328-2383
HOT
14.
Service Parts
Part Description Part No.
1 Handle A069911*
2 Handle Cap A66D558
3 Trim Cap A103250*
4 Bonnet Nut A104034
5 Ceramic Disc Cartridge A507348N
6 Pull-Out Spray A528011W-54*
7 Screw A075208
8 Pull-Out Spray Hose A515103N*
Part Description Part No.
9 Weight A504718
10 Hose Adaptor Assembly A66G465N
11 Allen Wrench
(H2.5 * 11 mm L * 53mm L) A031217
12 Allen Wrench
(H4 * 24mm L * 74mmL) A031011NI
13 Cover Plate & Gasket A66F470-T*
14 Base A504043*
*Specify Finish
Many replacement cartridges, aerators, and drain
assemblies can be purchased at your local The
Home Depot store or online at HOMEDEPOT.COM
10