Legacy THE WALL Pro Audio User manual

Thank you for choosing THE WALL
from Legacy Pro Audio
THE WALL is a full range loudspeaker system utilizing the present state of the art in
driver, crossover, amplifier and acoustic radiation control technologies.
The system is designed, assembled and tested in Springfield, IL by a dedicated group of
engineers, craftsmen and music lovers.
Please take a few moments to learn more about the features and controls of these
instruments to assure full enjoyment.

CONNECTIONS:
To Processor
Input 1 From preamp left output
Input 2 From preamp right output
Input 3 N/A with THE WALL. Can be used for center channel
Input 4 You can input low frequency effects from the “.1” subwoofer channel
It will be mixed into the subwoofer section of the left and right WALL speakers.
From Processor
Output 1 To left WALL speaker XLR (leftmost) subwoofers
Output 2 To left WALL speaker XLR (rightmost) top rear woofer
Output 3 To left amplifier channel (which outputs to left WALL binding posts)
Output 4 N/A with THE WALL. Can be used to control Center Stage center lower range
Output 5 To right WALL speaker XLR (leftmost) subwoofers
Output 6 To right WALL speaker XLR (rightmost) top rear woofer
Output 7 To right amplifier channel (which outputs to left WALL binding posts)
Output 8 N/A with THE WALL. Can be used to control Center Stage center upper range

CONNECTIONS Diagram:

Routing Matrix in Wavelaunch Processor
This can be controlled with XConsole Software. Click here to download the software and to watch a brief instructional video.

Dimensional Line Drawings (inches):