Legacy LEGACY24100 User manual

USER MANUAL
FOR LITHIUM BATTERY
ENERGY STORAGE SYSTEM
VERSION 1.0
LEGACY24100/150/300
LEGACY48100/150/300
LEGACY51.2-100/150/300

User manual
www.connectinglegacy.com
Contents
1. Introduction............................................................................................................................................................................................... 2
2. Battery Specifications.............................................................................................................................................................................3
3. Important Safety Warning....................................................................................................................................................................4
3.1. Before connecting.......................................................................................................................................................................4
3.2. Necessary installation Tools....................................................................................................................................................4
3.3. Personal protective equipments............................................................................................................................................4
3.4. During operation.........................................................................................................................................................................5
4. Unpacking & Overview..........................................................................................................................................................................5
4.1. Packing list.....................................................................................................................................................................................5
4.2. Product over............................................................................................................................................................................... 5
5. Installation.................................................................................................................................................................................................. 6
5.1. Selecting mounting location...................................................................................................................................................6
5.2. Mounting the pack..................................................................................................................................................................... 6
6. Communication........................................................................................................................................................................................ 8
6.1. Battery and PC communication(note:insert the RS232 port)......................................................................................8
6.2. The communication PIN of battery and the invterter................................................................................................... 9
6.3. Dial settings of battery ADS address................................................................................................................................... 9
6.4. How to connect Growatt inverter（RS485A）.............................................................................................................. 10
6.5. How to connect Growatt inverter（Canbus）...............................................................................................................12
6.6. How to connect Deye inverter.............................................................................................................................................14
Appendix 1....................................................................................................................................................................................................16
WARNING:.................................................................................................................................................................................................... 17
Product Responsibilities and Consulting.......................................................................................................................................... 18
Note: Please comply with all warnings and operating instructions in this manual strictly. Save this manual properly
and read carefully the following instructions before installing the unit. Do not operate this unit before reading
through all safety information and operating instructions carefully.

2
User manual
www.connectinglegacy.com
1. Introduction
The Energy storage pack is an essential component of the photovoltaic power generation system. It can provide
electricity for the connected load, and it can also store photovoltaic solar modules, fuel generators, or wind
energy generators by charging the remaining energy in case of emergency. When the sun goes down, energy
demand is high, or there is a power outage, you can use the energy stored in the system to meet your energy
needs at no additional cost. In addition, the energy storage Pack can help you achieve energy self-consumption
and ultimately achieve the goal of energy independence.
According to different power conditions, the energy storage PACK can output power during peak power
consumption, and can also store energy during low power consumption. Therefore, when connecting the
matching photovoltaic modules or inverter arrays, external equipment is required to match the energy storage
the working parameters of the pack to achieve the highest operating efficiency. For a simple diagram of a typical
energy storage system.
Figure 1 Energy storage System Overview
It is very important and necessary to read the user manual carefully before installing or using the battery.
Failure to follow any of the instructions or warnings in this document can result in electrical shock, serious injury,
death,
or may damage the battery and the whole system.
 If the battery is stored for a long time, it is requirement that they are charged every three to six months, and
the SOC should be no less than 80%,after fully discharging,The battery needs to be recharged within 12
hours.

Do not expose cable outside;Do not use cleaning solvents to clean the battery.
 All battery terminals must be disconnected before maintenance.

3
User manual
www.connectinglegacy.com
2. Battery Specifications
No
Item
General Parameter
1
Combination method
24V
48V
51.2V
2
Rated Capacity(Ah)(typical)
100/150/200
100/150/200
100/150/200
3
Factory Voltage(V)
25.6-26.4V
48-50V
51-53V
4
Rate power(Wh)
2560/3840/5120
4800/7200/9600
5120/7680/10240
5
Charging Voltage(V)
recommend/max
28/28.8V
54/54.6V
57/57.6V
6
Charging Current(A)
recommend/max
0.2C/0.5C
0.2C/0.5C
0.2C/0.5C
7
Float charge Voltage(V)
27.6V
53.5V
55.5V
8
Discharge Cut-off Voltage(V)
<=22V
<=41V
<=44V
9
Max Discharging current(A)
0.5C
10
Charging Current limits(A)
10A /20A
11
Charge over Current protect(A)
110/110/Adjustable
12
Discharge over Current protect(A)
110A/110A/220A
13
Internal Impedance
≤100mΩ
14
Communication protocol
CAN/485
CAN/485
CAN/485
15
Host software and
Communication protocol
RS232/485
RS232/485
RS232/485
16
Operation Temperature Range
Charge:0~55℃
Discharge: -20~55℃
17
Storage Temperature
Range(recommend)
0℃~25℃
18
Combination method
24V
48V
51.2V
19
Rated Capacity(Ah)*Parallel
PACK*Parallel
PACK*Parallel
PACK*Parallel
20
Factory Voltage(V)
25.6-26.4V
48-50V
51-53V
21
Charging
Voltage(V)recommend/max
28/28.8V
54/54.6V
57/57.6V
22
Charging
Current(A)recommend/max
0.1C/0.2C(total)
0.1C/0.2C(total)
0.1C/0.2C(total)
23
Float charge Voltage(V)
27.6V
53V
56V
24
Discharge Cut-off Voltage(V)
<=24V
<=48V
<=50V
25
Max Discharging current(A)
90*Parallel/150*Parallel/180*Parallel
26
Charging Current limits(A)
10A/20A*Parallel
27
Charge over Current protect(A)
110/110/Adjustable*Parallel
28
Discharge over Current protect(A)
Adjustable
110/110/Adjustable*Parallel
29
Internal Impedance
≤100mΩ
≤100mΩ
≤100mΩ
30
Communication protocol
CAN or 485
CAN or 485
CAN or 485
31
Host software and
Communication protocol
RS232/485
RS232/485
RS232/485
32
Operation Temperature Range
Charge:0~50℃
Discharge: -20~55℃
33
Storage Temperature
Range(recommend)
0℃~25℃

4
User manual
www.connectinglegacy.com
3. Important Safety Warning

Do not expose the battery to flammable or harsh chemicals or vapors.

Do not paint any part of the battery, include any internal or external components.

Do not connect battery with PV solar wiring directly.

Any foreign object is prohibited to be inserted into any part of the battery
Our company will not bear any warranty claims for direct or indirect damage caused by violation of the above
Item
3.1. Before Connecting
 After unpacking, please check the battery and pack list first, if the battery is damaged or spare parts are
missing, Please contact the dealer.

Before installation, be sure to cut off the grid power and make sure the battery is in the turned-off mode;
 Wiring must be correct, do not mix-connect the positive and negative cables, and ensure no short circuit
with the external device;
 It is prohibited to connect the battery with AC power directly;
 The BMS in the battery is designed for 24VDC/48VDC, DO NOT connect battery in series;
 It is prohibited to connect the battery with different type of battery;
 Please ensure the electrical parameters of battery system are compatible to inverter;
Keep the battery away from fire or water.
3.2. Necessary installation Tools
3.3. Personal protective equipments

5
User manual
www.connectinglegacy.com
3.4. During operation
If the battery system needs to be moved or repaired, the power must be cut off first and the battery is completely
shutdown;
It is prohibited to connect the battery with different type of battery;
It is prohibited to put the batteries working with faulty or incompatible inverter;
In case of fire, only dry powder fire extinguisher can be used, liquid fire extinguishers are prohibited;
Please do not open, repair or disassemble the battery. We do not undertake any consequences or related
responsibility due to violation of safety operation or violating of design, production and equipment safety standards.
4. Unpacking & Overview
4.1. Packing List
You will receive the following parts(Not a full set), sample as follow picture.For customized requirements,
please place an order with the manufacturer.
*NOTE : Types of communication tools need extra order.
4.2. Product Over
Figure 2 A General battery shape.Front view

6
User manual
www.connectinglegacy.com
WARNING!! Remember that this Pack is heavy so please be careful when
removing it from the package,or install it .
No.
Description
Silk-screen
Remark
1
Pack positive pole
P+
Output terminal
2
Pack negative pole
P-
Output terminal
3
LCD
4
LCD key
5
handle
6
Fixed bracket
7
reset
RST
Press and hold for 3 seconds to turn the battery on/off; long
press for 6 seconds to reset the battery system
8
Run LED indication
RUN
9
ALARM LED indication
ALM
Lift heavy objects
10
Capacity LED indication
11
DRY connect port
DRY CONTACT
12
485A communication port
RS485A
Connect to inverter
13
CAN communication port
CAN
Connect to inverter
14
RS232 communication port
RS232
Host software
15
RS485B communication port
RS485B
Parallel use
16
ADS Coder
ADS
Set Battery address code
17
Air switch
ON/OFF
18
Power switch
ON/OFF
5. Installation
5.1. Selecting Mounting Location
Consider the following points to install the energy storage Pack:
 Do not mount the Pack on flammable construction materials.Mount on a solid surface;

Install this Pack module at eye level in order to allow the readability of LCD display at all times.
 For proper air circulation to dissipate heat, please leave a gap of about ＞0.3 meter from the ground,30 cm
from the side of the device.

The ambient temperature should be between 0°C and 40°C and relative humidity should be between 25%
and 85% to ensure optimal operation.

The recommended installation is flat wise adherence.
Install the battery module in a dry, protected area with no excessive dust and sufficient air circulation. Do not
operate in locations where the temperature and humidity are outside the specified range.
5.2. Mounting The PACK
When installing the Pack bracket, use appropriate screws to fix it. After that, the equipment should be
firmly bolted.The pack can be run indoors or outdoors. However, only professional personnel can enter
this area for installation or maintenance.
 Step 1:
When receiving the product, first check whether all parts are complete, if not, please report to the Dealer .
 Step 2:
Ensure that the Pack is installed on the Rack.Choose a suitable installation location and require the battery pack
to be placed at a safe.
The first load-bearing plate should be at least 15cm away from the ground. The distance between the load-

7
User manual
www.connectinglegacy.com
bearing plates is about 205mm.
We recommend that the installation distance be 205mm.
Figure4.
 Step 3:
Mark the position of the nut on the cabinet with the mounting bracket, and clamp the nut into the cabinet. See
Figure5.
Figure 5
 Step 4:
As shown in the below, install the battery pack. The pack is too heavy , Please use a special lifting device to lift
the pack for operation and safety protection.Put the battery module into the cabinet and screw it, as shown in
Figure 6.
Figure 5

8
User manual
www.connectinglegacy.com
Troubleshooting
6. Communication
6.1. Battery and PC communication(note:insert the RS232 port)
6.1.1 Prepare a computer (Win7 system or above), use a special cable to connect the battery and the PC
6.1.2 Install software（Please ask the manufacturer for the installation package)
6.1.3 After the installation is complete, run this program, the battery and PC communicate successfully

9
User manual
www.connectinglegacy.com
6.2. THE COMMUNICATION PIN OF BATTERY AND THE INVERTER:
Battery Pack
Inverter
Pin1
NC
Pin1
NC
Pin2
NC
Pin2
NC
Pin3
NC
Pin3
NC
Pin4
CANH
Pin4
CANH
Pin5
CANL
Pin5
CANL
Pin6
NC
Pin6
NC
Pin7
GND
Pin7
GND
Pin8
NC
Pin8
NC
6.3. DIAL SETTINGS OF BATTERY ADS ADDRESS: