LEISUREWIZE LW613 User manual
Induction Hob
with Adjustable Power Watt Settings
Thank you for purchasing this Induction Hob from Leisurewize. This
induction hob is ideal for caravan holiday makers, campervan owners
& motorhome users. It is also suitable for use at home and in small
kitchenettes.
This product is intended for domestic use. This product is NOT intended
for commercial use.
IMPORTANT: Before using this product, we highly advise that you
read all the information in this document. And please keep this
document in a safe place for future reference.
LW613
Table of Contents
Intention For Use
Product Elements
Health & Safety Guidelines
How Does The Induction Hob Work?
Operating Instructions
Temperature Range (oC)
Selecting Your Power Input
Power input settings (W)
Recommended Pans/Pots
Troubleshoot/Error Messages
Technical Support
Technical Specification
Table of Contents
1
3
3
3
4
5
5
5
5
5
6
7
Health & Safety Guidelines
Please read and familiarise with the following health & safety guidelines below before using the appliance.
1. When connecting this appliance to your mains power supply, please make sure that the correct input voltage
and wattage is supplied to the product.
2. When the product is not in use, please ensure that the product is switched off and is fully disconnected from
the mains power supply.
3. DO NOT leave this appliance unattended when in use.
4. If the appliance has accidentally been submerged in water, please immediately disconnect the appliance from
the mains power supply and then remove the product from the water. Never remove the product from the
water when it is connected to the mains power supply. Risk of electric shock.
5. Never attempt to reconnect the appliance after it has been submerged in water. Allow the product to be fully
dried and be tested by a qualified professional before you use the appliance again.
6. This product is not a toy, and it is not designed to be used by children. Always keep the power cable away from
the induction hob’s heat source, water or any other liquid.
7. Ensure sharp objects such as knives are never near the mains power cable, especially when the product is in
use.
8. Never allow the power cable of the unit to hang off the edge of a work surface where it could be pulled by a
small child. Always check the position of the mains power cable when the product is in use.
9. Never carry the appliance by the mains power cable.
10. If the appliance’s power cable or plug becomes faulty or damaged, do not use the product. Please check the
cable prior to use.
11. If the appliance does become damaged (which also includes appliance’s plug/power cord), NEVER attempt to
repair the damage yourself. We highly advise that you seek assistance from a competent professional to carry
out the repair.
12. When this appliance is in use, this product will get very hot. NEVER touch the surface when in use. Risk of
burn/injury/scalding.
13. Never use this product outdoors. This appliance is designed for indoor use only.
Operating Instructions
14. When using this product, ensure you use it in a well ventilated area.
15. Please ensure the appliance’s air vents are not obstructed. When positioning the unit, ensure that the unit is
10cm sides and the rear of the unit.
16. DO NOT use this appliance with wet hands. Always ensure your hands, the appliance and the work area are dry
before using the product.
17. If this appliance stops working unexpectedly, switch off and unplug the appliance immediately. Get the product
assessed by a qualified & competent professional.
18. Place the appliance on a heat resistant surface. Never use the appliance on a low-heat resistant surface such
as vinyl.
19. Never place the appliance on a metallic surface.
20. After use, the induction hob will remain hot for a period of time. Allow time for the appliance to fully cool down
after use.
21. The appliance may have an affect on items that have or attract magnetic fields. These include radios,
televisions and bank cards.
22. During use, never place paper between the pot/pan and appliance. Risk of fire.
23. Never disconnect the power cord immediately after cooking. Allow at least 15 minutes for the unit to fully cool down.
To use the induction hob, please see the instructions below:
1. Place the induction hob on a suitable heat resistant surface.
2. Connect the induction hob to your mains power supply.
3. Place a suitable pan/pot (See Recommended Pans/Pots) on the centre of the induction hob.
PLEASE NOTE: The Induction Hob will not heat up unless you place your pot or pan on top of the hob. See
Troubleshoot/Error Messages.
1. Press the ‘On/Off’ button.
2. Set the power input by pressing the “Power” button and pressing the “Up” or “Down” button to adjust the power
setting (see “Selecting Your Power Input”).
3. Then, press the “Temperature” button and set the desired temperature by pressing “Up” or “Down”. The
temperature range can be set between 60oC to 270oC (see table 1). Once both temperature and power input have
been set, set the timer to up to 3 hours. Once the timer reaches its end, the induction hob will go into standby
mode and the heating element will turn off.
4. To turn off the induction hob during cooking, press the “On/Off” button for the unit to go into standby mode. Once
in standby mode, and you are no longer going to use the hob, allow for the unit to cool down for 15 minutes before
disconnecting the appliance from the mains.
WARNING: You must allow for the unit to cool for 15 minutes before disconnecting from the mains.
Please Note: When the product goes into standby mode, you will hear the built-in fan working to cool down the product.
Once the unit has cooled down, and there has been a period of inactivity, the product will auto shut off. Alternatively,
when the product is in standby mode, you can switch off the product by disconnecting the unit from the mains power
supply after you have allowed the product to cool down for 15 minutes.
Recommended Pans/Pots
Troubleshoot/Error Messages
Selecting your power input
This unit gives you 9 power input settings from 300W to 2000W. This feature makes it ideal for operating the unit in
locations where there is a low wattage power supply (e.g. caravan/motorhome parks) or if you want to use the hob via a
power inverter which converts your vehicle’s 12V DC battery into a 230V AC power supply.
Please note, when selecting a lower power input, it will take longer for the induction hob to fully heat up.
Table 2 below shows you the 9 power input settings:
When the induction detects incorrect operation, the unit will display an error message in the form of an Error Code. Table
3 below outlines all the Error Codes along with an explanation to show you how to rectify the issue.
The following pots/pans are suitable for use with the induction hob.
IMPORTANT: Ensure the diameter of the pots and pans is between 12 to 26cm. Also, prior to
use, please check suitability of pan/pot to see whether it is suitable for the unit.
WARNING: We highly advise AGAINST using the following pans/pots:
Temperature Ranges (˚C) 60 90 120 160 180 200 220 240 270
Power Input Settings (Watts) 300 500 800 1000 1200 1400 1600 1800 2000
Error Code Cause Solution
E0 No cookware (i.e. pot or pan
between 12cm to 26cm in diameter)
is placed on the hob or the pot or
pan is less than 12cm in diameter.
Place a suitable pan or pot on the centre of
the hob. See recommended Pot/Pan
E1 Voltage is lower than 85V Ensure voltage of power source is between
200 to 240V
E2 Voltage is higher than 275V Ensure voltage of power source is between
200 to 240V
E3 Short circuit or surface sensor issue Please contact technical support (see Tech-
nical Support)
E4 Surface temperature is over 280oC Please check to see if the pot or pan you
have placed on the hob has a flat bottom. If
not, please use a suitable pan/pot. Allow the
hob to cool before reuse.
E5 IGBT (insulated-gate bipolar tran-
sistor) temperature over 105oC,
overheat protection
Ensure there is no blockage or obstruction
on both the air inlet and air outlet on the
unit. Also, check to see if the cooling fan is
in working order.
E6 Short circuit or IGBT sensor issue Please contact technical support
(see Technical Support)
Technical Support
provide the product name and supplier code (see Technical Specifications) along with the technical query
and proof of purchase.
Technical Specification
Product Name
Supplier Code
Power Input
Temperature Range
Current
Voltage
Leisurewize Induction Hob
LW613
300W to 2000W
60oC to 270oC
6A to 15A
220V to 240V AC 50-60Hz
www.streetwizeaccessories.com
Streetwize: Ashburton Road West, Trafford Park, Manchester, M17 1RY
For Product Support:
T: +44 (0)161 447 8597
For Trade Enquiries:
T: +44 (0)161 447 8580
EU Registered Address:
Ace Supply Co (Europe) Ltd, 25 Herbert Place,
Dublin 2, D02 A098 Republic of Ireland.
Table of contents
Other LEISUREWIZE Hob manuals
