LEMEGA DTS2 User manual

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. WARNING – To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
6. Clean only with a dry cloth.
7. Only use attachments/accessories specified by the
manufacturer.
8. Unplug this apparatus during lightning storms or
when unused for long periods of time.
9. Keep this product a safe distance away from naked
flame, such as a lit candle.
10. Apparatus shall not be exposed to dripping or
splashing and no objects filed with liquids, such
as vases, shall be placed on the apparatus.
11. Don't press more than one key at the same time.
12. In the event that the unit malfunctions, unplug it for
3 seconds, then plug in again.
1
1 Power adapter
1 'Owner s manual
1 Warranty Card
2 FM wire antenna clips
Package content include:
Important Safety Instructions

1 2 3 4 5 6 7 8 9 10
11
12
2
LCD Display
1. Switching among different modes: Bluetooth, FM and
Soothing sleep music mode.
2. Set the sleep timer from 15mins / 30mins / 60mins /
Sleep Off in turn
3. Alarm setting
4. Clock display
5. Switch between AM and PM
[Note: When you set the Alarm, please note the time is
AM or PM]
6. Battery charging status display
3
1. [Standby/ MODE]: Plug in the mains power
or switch the power switch “ON” position at the rear
panel to power on the DTS2 unit and enter Soothing
sleep music automatically. Briefly Press M to switch FM
mode, Bluetooth mode and Soothing music mode in turn.
Press and hold [Long Press] go to Standby mode.
2. VOL- / : Press and hold button to decrease
the volume quickly. Briefly press to decrease the
volume one step by one step.
3. VOL+ / : Press and hold button to increase
the volume quickly. Briefly press to increase the
volume one step by one step.
/
Guide To Features (Top touch buttons):
1
2
34
5
5
6

4. : In Bluetooth Soothing sleep music mode/ ,
briefly press to previous track.
In FM mode, briefly press to move ward back
0 1MHz frequency. Press and hold 2 seconds to.
auto scan the stations- backward .
5. : Press to select Play/Pause under Bluetooth
mode. In FM mode, press to auto-scan all good
stations. After auto-scanning, press the button to switch
the saved stations from low frequency to high frequency.
6. : In Bluetooth Soothing sleep music mode/ ,
briefly press to next track .
In FM mode, briefly press to move forward 0 1MHz .
frequency. Press and hold 2 seconds to auto-scan
the stations.
7. : , Sleep In FM/BT/Soothing sleep music mode
Press to set the time interval mins mins 15 /30 /
60mins/Sleep Off in turn. the DTS2 unit will stop playing
in 15mins/30mins/60mins.
8. / ALARM : Press button to activate or deactivate
alarm. Alarm icon will appear on the display when
Alarm is activated.
Press and hold button to start Alarm Setting .
When the hours flash, press to set the hours/ ,
press to confirm and move to the next step .
54
When the minutes flash, press / to set the
minutes, press to confirm and move to the next step.
Alarm source: Press / to select an alarm
ringtone [9 soothing music sources available] then press
button to confirm setting and move to the next step.
Alarm Volume: Press / to set the volume, then
press Alarm to confirm setting and finish setting. Alarm
9. CLOCK / DIM : Briefly press button to adjust the
LCD brightness: High/Mid/Low in turn.
Press and hold to start the time setting .
Press / to select 12H or 24H and press to
confirm setting and move to the next step.
When the Hours flash, press / to set the hours,
press to confirm setting and move to the next step.
When the minutes flash, press / to set the
minutes, press to and finish clock time setting.
Note: If the time stops flashing while setting, repeat the
above steps.
10. Light Mode: Briefly press to enter into light
mode. Press again to switch warm light, cool light
and turn off in turn.
Press and hold to adjust the light brightness level.

1. Battery switch [ON / OFF] 2. 5V 3A DC
3. 5V 1A USB charging 4. FM Wire Antenna
1 2 3 4
1. Press “M” button on the unit or press “FM” button on
the remote to enter to FM mode;
2. Briefly press / to move backward /forward
each 0.1MHz frequency to search stations. Or press
AUTOTUNE button on remote control to auto-scan the
active stations and save the strong signal stations
automatically.
1. Press “M” button on the unit to enter to Soothing
sleep music mode;
FM RADIO
3. : press the button to switch the saved stations
from low frequency to high frequency.
Noted: Noted: To get a good radio reception, hung up FM
antenna wire and move antenna wire around until you
get good reception
1. Press “M” button to enter Bluetooth mode.
2. Connect your smart phone, your smart phone will
show bluetooth device name “LEMEGA DTS2”
select device name “LEMEGA DTS2” to pair.
3. You can start to play your music tracks, then adjust
the volume level on your device.
BLUETOOTH
SOOTHING SLEEP MUSIC MODE
76
11.Wireless charging: Please make sure your phone
feature with wireless charge function before you do
wireless charging. Then put your phones above the
wireless charging indicator area and start to power
charge. If your phone no built-in wireless charging,
please go through 5V 1A USB Port for charging.
12. Handle with light
13. Snooze: After the alarm rings, press any of the
buttons on the top of the units or on remote control
to temporarily mute the alarm for 5 minutes, or briefly
press the Alarm / Sleep button to cancel Alarm setting.
2. Briefly press / to change different Soothing
music: Lullaby, Rain, Running Water, Birds chirping,
Insect Sound, frog croaks, Ocean Waves, Thunder,
Campfire in turn.
Back Overview

: 5W
Model: DTS2
Type: Clock Radio & Charger
Drivers: 1 x 2.5"
Power output: RMS 3W
Wireless charging output
Power Supply: DC 5V 3A
or 3.7V/8800mA/H lithium batteries
Dimensions: L 205 X H60 X D205 MM
Weight: 775g
SPECIFICATIONS
Specifications are subject to change without notice.
Any Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment. This device
complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help.
9
8

Correct Disposal of this product. This marking
indicates that this product should not be disposed
with other household wastes throughout the EU.To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources.To return your used device, please
use the return and collection systems or contact the
retailer where the product was purchased.They can
take this product for environmental safe recycling.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
10