LENCO PMX-300 User manual

Model PMX-300
User manual-High power DJ mixer system with Bluetooth USB FM and party lights
Gebruikershandleiding-Krachg DJ mixersysteem met Bluetooth USB, FM en feestlichten
Bedienungsanleitung Hochleistungs-DJ-Mixersystem mit Bluetooth, USB, UKW und Partylicht
Mode d’emploi - Système de mixage DJ puissant avec Bluetooth, USB, FM et lumières
Manual de usuario – Sistema mezclador de DJ de alta potencia con Bluetooth USB FM y luces fesvas

2
Index
English..............................................................................................................................................................3
Nederlands.....................................................................................................................................................14
Deutsch ..........................................................................................................................................................25
Français ..........................................................................................................................................................37
Español...........................................................................................................................................................49

3
English PMX-300
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiaon exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any venlaon openings. When placing the device on a shelf, leave 5 cm (2”) free
space around the whole device.
4. Install in accordance with the supplied user manual.
5. Don’t step on or pinch the power adaptor. Be very careful, parcularly near the plugs and the cable’s exit
point. Do not place heavy items on the power adaptor, which may damage it. Keep the enre device out
of children’s reach! When playing with the power cable, they can seriously injure themselves.
6. Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-
generang products.
8. Avoid using the device near strong magnec fields.
9. Electrostac discharge can disturb normal usage of this device. If so, simply reset and restart the device
following the instrucon manual. During file transmission, please handle with care and operate in a stac-
free environment.
10. Warning! Never insert an object into the product through the vents or openings. High voltage flows
through the product and inserng an object can cause electric shock and/or short circuit internal parts.
For the same reason, do not spill water or liquid on the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
12. Do not use this device when condensaon may occur.
13. Although this device is manufactured with the utmost care and checked several mes before leaving the
factory, it is sll possible that problems may occur, as with all electrical appliances. If you noce smoke, an
excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the
main power socket immediately.
14. This device must be well venlated at all me!
15. This device must operate on a power source as specified on the specificaon label. If you are not sure of
the type of power supply used in your home, consult your dealer or local power company.
16. The socket outlet must be installed near the equipment and must be easily accessible.
17. Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
18. Devices with class 1 construcon should be connected to a main socket outlet with a protecve earthed
connecon.
19. Devices with class 2 construcon do not require an earthed connecon.
20. Keep away from rodents. Rodents enjoy bing on power cords.
21. Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can
cause a short circuit.
22. Avoid placing the device on any surfaces that may be subject to vibraons or shocks.
23. To protect the device during a thunderstorm, unplug the ac power adaptor.
24. When the device is not in use for long periods, unplug the ac power adaptor for safety reasons.
25. To clean the device, use a sodry cloth. Do not use solvents or petrol based fluids. To remove severe
stains, you may use a damp cloth with dilute detergent.
26. The supplier is not responsible for damage or lost data caused by malfuncon, misuse, modificaon of the
device or baery replacement.
27. Do not interrupt the connecon when the device is formang or transferring files. Otherwise, data may
be corrupted or lost.

4
28. The usb memory sck should be plugged into the unit directly. Don’t use an usb extension cable because it
can cause interference resulng in failing of data.
29. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with
liquids, such as vases, are placed on or near the apparatus.
30. To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from
the mains, as the disconnect device is the mains plug of apparatus.
31. The mains plug of the apparatus should not be obstructed or should be easily accessed during intended use.
32. Baery shall not be exposed to excessive heat such as sunshine, fire or the like.
33.Minimum distance of 10cm around the apparatus is needed for sufficient venlaons.
34. The venlaon should not be impeded by covering the venlaon openings with items such as
newspapers, table-cloths, curtains etc.
35. No naked flame sources such as lighted candles should be placed on the apparatus.
36. Aenon should be drawn to the environmental aspects of baery disposal.
37. The apparatus can only be used in moderate extremely cold or climates warm environments should be
avoided.
38. The rang label has been marked on the boom panel of the apparatus.
39. This device is not intended for use by people (including children) with physical, sensory or mental
disabilies, or a lack of experience and knowledge, unless they’re under supervision or have received
instrucons about the correct use of the device by the person who is responsible for their safety.
40. This product is intended for household use only and not for commercial or industrial use.
41. Make sure the unit is adjusted to a stable posion. Damage caused by using this product in an unstable
posion or by failure to follow any other warning or precauon contained within this user manual will not
be covered by warranty.
42.Never remove the casing of this apparatus.
43.Never place this apparatus on other electrical equipment.
44. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or
vibraon.
45. Do not clean this product with water or other liquids.
46. Do not block or cover the slots and holes in the product.
47. Do not push foreign objects into the slots or holes in the product.
48. Do not allow children access to plasc bags.
49. Please check that the voltage on the type plate of your appliance corresponds with your house electricity
supply (type plate is located on the back of the unit).
50. Protect the power cord from being walked on or pinched, parcularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
51. Only use aachments/accessories specified by the manufacturer.
52.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects
have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
53. Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
Warning: prolonged exposure to loud sounds from personal music players may lead to temporary or permanent
hearing loss.
INSTALLATION
•Unpack all parts and remove protecve material.
•Do not connect the unit to the mains before checking the mains voltage and before all other connecons
have been made.
•Do not cover any vents and make sure that there is a space of several cenmeters around the unit for
venlaon.

REAR PANEL
5
1. Power Switch
Switch modes DC INPUT, AC INPUT or off.
When switched to AC status, the speaker is working on 230V and Baery will be charged.
When switched to OFF, power is offwith no baery charging.
When switched to DC, speaker is baery powered.
2. DC 12V INPUT
The speaker can be connected to the 12V DC baery of a car.
3. FM ANTENNA
4. AC INPUT AC 230V~, 50Hz
Table of contents
Languages:
Other LENCO Dj Equipment manuals