Lenovo ThinkCentre TIO27 Instructions for use

TIO27 Simplified service manual for dismantling
Model Name: Lenovo TIO27

Exploded Diagram

1. Precaution
PleasereadtheprecautionasfollowstopreventanydamagestotheLCDMonitor.
Makesureallpowerconnectorisremoved.BesurethattheLCDMonitorisinpoweroffstatus.
Preparesoftclothand
spongeasworking
platform
toplaceLCDmonitor
horizontally.
HoldLCDbytheside
carefullyandDON’Ttouch
or
presspaneldirectly.

2. Appropriate tools
SelecttheAppropriatetoolsfordisassemblyandre-assembly.
Phillipsscrewdriver(#2)
spacerscrewdriver
C/Ddisassemblytool
Glovesorsoftcloth

3. Disassembly SOP
Remove the stand assy
Starting from the back of the
monitor, remove the screw*6pcs to
remove the cover.
Tool: Screwdriver #2
Remove the screw*6pcs to remove
the COVER_BACK_IO and the
mainboard.
Tool : Screwdriver #2

Remove the pins

Remove the screw*10pcs to
remove the DIE-CASTING.
Tool : Screwdriver #2
Use the C/D disassembly tool to
remove the rear cover
Take off the tapes and the pins,
remove the Key Board.

Take off the AL FOIL
Remove the screw*16pcs to
remove the BKT_BTM & BEZEL
Tool: Screwdriver #2
Disconnect the pin
Remove the screws*4pcs to
remove the HINGE ASS'Y
Tool: Screwdriver #2

Remove the screw*3pcs to remove
the COVER_Holder_REAR.
Tool: Screwdriver #2
Remove the screw*4pcs to remove
the speaker.
Tool: Screwdriver #2

Remove the screw*8pcs to remove
the WEBCAM MODULE and
Audio Board.
Tool: Screwdriver #2
The bezel
The Panel