Lenovo ThinkVision P24q-30 Instructions for use

Service Manual
1
P24q-30 Simplified service manual for dismantling
Model Name: Lenovo P24q-30

Service Manual
2
Exploded Diagram

Service Manual
3
1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or
press panel directly.

Service Manual
4
2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.

Service Manual
5
3. Disassembly SOP
Put the monitor on a flat surface
(Put the pe bag under the monitor)
Push the button to release the stand
Remove the screw * 4pcs
Tool : Screwdriver #2
Use the C/D disassembly tool to
release Rear cover hook

Service Manual
6
Remove All tape and foil
Remove the screw.
Tool : Screwdriver #2
Remove the screw.
Tool : Screwdriver #0

Service Manual
7
Unplug LVDS line/power key pcb
line/light bar line
Release joy-stick key pcb and
power key pcb from the the middle
frame
Remove the Main chassis
Release the middle frame from the
Panel
Unplug power-pcb to if-pcb cable
Remove acetate tape and mylar
sheet from Main chassis

Service Manual
8
Remove All screw.
Tool : Screwdriver #2
Take out PCB and Peel off all
Gasket、mylar、thermal pads .
Take out the Thermal pads from
pcb