Lenovo ThinkVision P27h-30 Instructions for use

P27h-30 Simplified service manual for dismantling
Model Name: Lenovo P27h-30

Exploded Diagram

1. Precaution
PleasereadtheprecautionasfollowstopreventanydamagestotheLCDMonitor.
Makesureallpowerconnectorisremoved.BesurethattheLCDMonitorisinpoweroffstatus.
Preparesoftclothand
spongeasworking
platform
toplaceLCDmonitor
horizontally.
HoldLCDbytheside
carefullyandDON’Ttouch
orpresspaneldirectly.

2. Appropriate tools
SelecttheAppropriatetoolsfordisassemblyandre-assembly.
Phillipsscrewdriver(#2)
spacerscrewdriver
C/Ddisassemblytool
Glovesorsoftcloth

3. Disassembly SOP
Push the button to remove the
stand-base assy.
Unscrew the screw*4pcs
Tool: Screwdriver #2
Use disassembly tool to open all
the latches along the edge of the
Rear Cover.
Disconnect the pin and take off the
Mylar and the tapes.

Take off the tape and disconnect
the pin.
Unscrew the screw*4 pcs to
remove the main frame.
Tool: Screwdriver #2
Tear off tape and disconnect the
connector
Remove the screw*15 pcs to
separate the panel and the middle
frame.
Tool: Screwdriver #2
Remove the mylar

Remove the screw*8pcs
Tool: Screwdriver #2
Disconnect the pins
Separate the panel and the middle
frame

The panel
The middle frame
Disconnect the pins to remove the
key board and the LED board
The rear cover