Lenovo Y27q-20 User manual

Y27q-20 Simplified service manual for dismantling
Model Name: Lenovo Y27q-20

Exploded Diagram

1. Precaution
PleasereadtheprecautionasfollowstopreventanydamagestotheLCDMonitor.
Makesureallpowerconnectorisremoved.BesurethattheLCDMonitorisinpoweroffstatus.
Preparesoftclothand
spongeasworking
platform
toplaceLCDmonitor
horizontally.
HoldLCDbytheside
carefullyandDON’Ttouch
or
presspaneldirectly.

2. Appropriate tools
SelecttheAppropriatetoolsfordisassemblyandre-assembly.
Phillipsscrewdriver(#2)
spacerscrewdriver
C/D disassembly tool
Gloves or soft cloth

3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Remove the screw * 4pcs
Tool : Screwdriver #2
Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on bottom
Remove the screws to remove the
HINGE ASS'Y
Tool : Screwdriver #2
Take off the tapes.

Remove the Key Board.
Disconnect the pins
Remove All screw.
Tool : Screwdriver #2

The Panel
The Bezel
Remove All screw.
Tool : Screwdriver #2

Disconnect the pins
The Mainframe
The Rear Cover