Lenovo ThinkVision P34w-20 WQHD Instructions for use

BOE.
P34W-20 Simplified service manual for dismantling
Model Name: Lenovo P34W-20

Exploded Diagram

1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or
press panel directly.

2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
spacer screwdriver
C/D disassembly tool
Gloves or soft cloth

3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Remove the bracket through the
buckle
Pull out stand

Remove the screw * 4pcs
Tool : Screwdriver #2
Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on bottom
Remove All tape and foil
Unplug light bar line

Take out the key board
Remove All screw.
Open the isolation cover.
Take out the LVDS cable

Remove the isolation cover
Remove All screw and Take out
the mylar
Remove All screw.
Tool : Screwdriver #2
Tool : spacer screwdriver
Take out PCB