Lenovo Y32p-30 User manual

Lenovo
Y32p-30
D22315UY0
User Guide

i
Product Number
D22315UY0
66F9-UAC6-WW
First Edition (09 2022)
© Copyright Lenovo 2022
All rights reserved.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to
governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and
disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: IF products, data, computer software, or services are delivered pursuant a General
Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-
05925.

ii
Contents
Product Number.......................................................................................................................................................................... i
Contents..................................................................................................................................................................................... ii
Safety information..................................................................................................................................................................... iii
Chapter 1Getting started.................................................................................................................................................... 1-1
Shipping contents....................................................................................................................................................................... 1-1
Notice for use ............................................................................................................................................................................. 1-1
Product overview ....................................................................................................................................................................... 1-2
Types of adjustments ................................................................................................................................................................. 1-2
User controls .............................................................................................................................................................................. 1-3
Cable lock slot ............................................................................................................................................................................ 1-3
Setting up your monitor ............................................................................................................................................................. 1-4
Connecting and turning on your monitor................................................................................................................................... 1-4
Registering your option .............................................................................................................................................................. 1-9
Chapter 2 Adjusting and using your monitor ....................................................................................................................... 2-1
Comfort and accessibility ........................................................................................................................................................... 2-1
Arranging your work area........................................................................................................................................................... 2-1
Positioning and viewing your monitor ....................................................................................................................................... 2-1
Quick tips for healthy work habits.............................................................................................................................................. 2-2
Health Administration ................................................................................................................................................................ 2-2
Accessibility information ............................................................................................................................................................ 2-5
Adjusting your monitor image.................................................................................................................................................... 2-6
Using the direct access controls ................................................................................................................................................. 2-6
Using the On-Screen Display (OSD) controls .............................................................................................................................. 2-7
Selecting a supported display mode ........................................................................................................................................ 2-11
Understanding power management ........................................................................................................................................ 2-12
Mirrored Power Button Function ............................................................................................................................................. 2-13
Caring for your monitor............................................................................................................................................................ 2-14
Detaching the monitor stand ................................................................................................................................................... 2-14
Wall Mounting (Optional)......................................................................................................................................................... 2-14
Chapter 3 Reference information ........................................................................................................................................ 3-1
Monitor specifications................................................................................................................................................................ 3-1
Troubleshooting ......................................................................................................................................................................... 3-2
Manually installing the monitor driver....................................................................................................................................... 3-4
Service information .................................................................................................................................................................... 3-6
Appendix A Service and Support..............................................................................................................................................A-1
Registering your option ..............................................................................................................................................................A-1
Online technical support ............................................................................................................................................................A-1
Telephone technical support ......................................................................................................................................................A-1
Appendix B Notices ................................................................................................................................................................. B-1
Recycling information................................................................................................................................................................. B-2
Collecting and recycling a disused Lenovo computer or monitor ..............................................................................................B-2
Disposing of Lenovo computer components..............................................................................................................................B-2
Trademarks.................................................................................................................................................................................B-2
Power cords and power adapters............................................................................................................................................... B-2

iii
Safety information
General Safety guidelines
For tips to help you use your computer safety, go to:
http://www.lenovo.com/safety
Before installing this product, read the Safety Information.
DANGER
To avoid shock hazard:
•Do not remove the covers.
•Do not operate this product unless the stand is attached.
•Do not connect or disconnect this product during an electrical storm.
•The power cord plug must be connected to a properly wired and grounded power outlet.
•Any equipment to which this product will be attached must also be connected to properly wired and grounded
power outlets.
•To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power
outlet should be easily accessible.
•To take special precautions to avoid the introduction of hazards when operating, installing, servicing,
transporting or storing equipment, the necessary instructions shall be made available.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
Handling:
•If your monitor weighs more than 18 kg (39.68 lb), it is recommended that it be moved or lifted by
two people.

Chapter 1 Getting started 1-1
Chapter 1 Getting started
This User’s Guide provides detailed operation instructions for the user. For quick instruction overview,
please see the Setup Poster for brief information.
Lenovo Y32P-30 supports Lenovo Display Control Center - Artery
Shipping contents
The product package should include the following items:
Information Flyer& Warranty booklet
Flat Panel Monitor
Power cord
DP Cable
HDMI Cable
USB A-B Cable
USB C-C Cable
Monitor stand
Monitor base
Notice for use
To setup your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by
rough handling or excessive pressure.
1. Place your monitor with the screen face down on a soft flat surface.
2. Align the stand assembly bracket to the monitor.
3. Insert the bracket towards monitor until it locks in place.
Note: "Remove the screws from base before detaching base and stand from the monitor" on page 2-14.
*:Depending on many factors such as the processing capability of peripheral devices, file attributes, and other
factors related to system configuration and operating environments, the actual transfer rate using the various
USB connectors on this device will vary and is typically slower than the data rates as defined by the respective
USB specifications: 5 Gbit/s for USB 3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20 Gbit/s for USB 3.2.

Chapter 1 Getting started 1-2
Product overview
This section will provide information on adjusting monitor positions, setting user controls, and using
the cable lock slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.
Height Adjustment
For height adjustment, user needs to press down or lift up the monitor.

Chapter 1 Getting started 1-3
User controls
Your monitor has controls on the rear which are used to adjust the display.
For information on how to use these controls, please see “Adjusting your monitor image ” on page 2-6.
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor. Please follow the
instructions that came with the cable lock to attach it.

Chapter 1 Getting started 1-4
Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information on page iii before carrying out this procedure.
1.Power off your computer and all attached devices, and unplug the computer power cord.
2.Connect the cables according to below icon indication.
Note: The Downstream USB Type C Power Specification output 5Vdc/3A(typical),and the
other standard USB Output 5Vdc/900mA. The USB downstream port does not provide
power while the monitor is switched off.

Chapter 1 Getting started 1-5
3.Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and
the other end to the HDMI connector on the monitor. Lenovo recommends that customers who
require to use the HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cable
0B47070”.
For more information, go to the following:
www.lenovo.com/support/monitoraccessories
4.Connect the DP cable to the DP connector of the monitor and the other end on the back of the
computer.

Chapter 1 Getting started 1-6
5.Connect the Type C cable to the Type C connector (upstream) of the monitor and the other end on
the back of the computer.
Note 1: Power output for USB-C: 20V/3.75A (Max, in smart power or super charging),20V/2.25A
(Typical), 15V/3A, 9V/3A, 5V/3A.
Note 2: USB-C upstream port supports maximum output power 45W/75W (Super USB
Charging/Smart Power) and the PDO table is as below:
Smart Power (W) 5V Fixed 9V Fixed 15V Fixed 20V Fixed
Off (45W)
3A
3A
3A
2.25A
On (75W)
3A
3A
3A
3.75A
Super USB Charging
USB-C up port
supply capability
USB-A port total
power consumption
Panel
Brightness
Off
45W
0 W ~ 25W
No Limit
On
75W
0 W ~ 5W
45 W
≧
5W
6. Connect one end of the USB-B cable to the USB upstream terminal on the back of the monitor, and
connect the other end of the USB cable to an appropriate USB port on your computer

Chapter 1 Getting started 1-7
7. The USB C port on the downside of your monitor can be used for USB Type C device or mobile
battery charging.
Note: The USB Power output 5Vdc/3A(typical), The USB downstream port does not provide
power while the monitor is switched off.
8. The USB port on the side of your monitor can be used for mouse or keyboard connecting.
9. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from
HDMI/DP.
Note: Please be aware that excessive and/or extreme volume might damage your hearing ability.
If there are any * tag, you can consult the comments on page 1-1.

Chapter 1 Getting started 1-8
10. The place of hanging a headset.
a. Open headphones hanging slots.
b. Close headphones hanging slot.
11. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC
60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used.
Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation
H05RR-F 3G 0.75mm2) shall be used.

Chapter 1 Getting started 1-9
12. Connect the cables with cable clip.
13. Power on the monitor and the computer.
14. When you install the monitor driver, download the driver that corresponds to your monitor
model from the Lenovo website https://pcsupport.lenovo.com/solutions/y32p_30 Refer to
the“Manually installing the monitor driver” on page 3-4 section to install the driver.
Registering your option
Thank you for purchasing this Lenovo TM product. Please take a few moments to register your
product and provide us with information that will help Lenovo to better serve you in the future.
Your feedback is valuable to us in developing products and services that are important to you, as
well as in developing better ways to communicate with you. Register your option on the following
Web site:
http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate
on the Web site questionnaire that you do not want to receive further information.

Chapter 2 Adjusting and using your monitor 2-1
Chapter 2 Adjusting and using your monitor
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer and to avoid
discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the
kind of work that you perform. In addition, use healthy work habits to maximize your performance and
comfort while using your computer.
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to work in comfort.
Organize you work area to match the way you use materials and equipment. Keep your work area clean
and clear for the materials that you typically use and place the items that you use most frequently, such
as the computer mouse or telephone, within the easiest reach.
Equipment layout and setup play a large role in your working posture. The following topics describe
how to optimize equipment setup to achieve and maintain good working posture.
Positioning and viewing your monitor
Position and adjust your computer monitor for comfortable viewing by considering the following items:
Viewing distance: Recommended viewing distance between the eye and the monitor screen is 1.5 x
the diagonal of the screen. Solutions in meeting this required distance in cramped office situations
include pulling desk away from wall or divider to make room for monitor, using flat panel or
compact displays placing the monitor in the desk comer, or placing the keyboard in an adjustable
drawer to create a deeper working surface.
1.5 times of screen diagonal
Monitor height: Position the monitor so your head and neck are in a comfortable and neutral
(vertical, or upright) position. If your monitor does not have height adjustments, you might have to
place books or other sturdy objects under the base of the monitor to achieve the desired height. A
general guideline is to position the monitor such that the top of the screen is at or slightly below
your eye-height when you are comfortably seated. However, be sure to optimize your monitor
height so the line of site between your eyes and the centre of the monitor suits your preferences for
visual distance and comfortable viewing when your eye muscles are in a relaxed stated.
Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to
accommodate your preferred head and neck posture.
General location: Position your monitor to avoid glare or reflections on the screen from overhead
lighting or nearby windows.
The following are some other tips for comfortable viewing of your monitor:
Use adequate lighting for the type of work you are performing.
Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the
image on your screen to meet your visual preferences.
Keep your monitor screen clean so you can focus on the screen’s contents.
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look
away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have
questions on eye fatigue or visual discomfort, consult a vision care specialist for advice.

Chapter 2 Adjusting and using your monitor 2-2
Quick tips for healthy work habits
The following information is a summary of some important factors to consider to help you remain
comfortable and productive while you use your computer.
Good posture starts with equipment setup: The layout of your work area and the setup of your
computer equipment have a large effect on your posture while using your computer. Be sure to
optimize the position and orientation of your equipment by following the tips outlined in
“Arranging your work area” on page 2-1 so you can maintain a comfortable and productive posture.
Also, be sure to use the adjustment capabilities of your computer components and office furniture to
best suit your preferences now and as your preferences change over time.
Minor changes in posture can help avoid discomfort: The longer you sit and work with your
computer, the more important it is to observe your working posture. Avoid assuming any one
posture for an extended period of time. Periodically make minor modifications in your posture to
help deter any discomforts that might arise. Make use of any adjustments that your office furniture
or equipment provide to accommodate changes in posture.
Short, periodic breaks help ensure healthy computing: Because computing is primarily a static
activity, it is particularly important to take short breaks from your work. Periodically, stand up from
your work area, stretch, walk for a drink of water, or otherwise take a short break from using your
computer. A short break from work gives your body a welcome change in posture and helps to
ensure you remain comfortable and productive while you do work.
Health Administration
Prolong exposure to computer screens may cause temporary visual fatigue. Factors including
working environment, working habit and posture, screen flicker and blue light contribute to this
condition. To minimize visual fatigue certain adjustments can be made on the work stations or
using suitable computer screens with features that alleviate eye strain.
Environment
Visual fatigue is affected by the working environment. Glare reductions and appropriate lighting
situations help minimize this condition.
Glare reduction
Glare can be reduced by
a) Changing position of any light source that is causing the glare.
b) Fitting the light sources with appropriate diffusers or lampshade.
c) Using curtains or blind on windows to minimize glare from direct sunlight.
d) Adjusting monitor position to be perpendicular to the source of light or windows.
e) Using an anti-glare screen - Lenovo monitors have anti-glare surface treatment that
scatters light for a reflection-free work usage.

Chapter 2 Adjusting and using your monitor 2-3
Lighting
Adequate lighting is necessary to avoid glare and eye fatigue. Excessive or insufficient lighting
makes the display on screen harder to see. Generally, lighting level should not exceed 750 lux and
levels ranging from 300 to 500 lux are most appropriate for computer desk work. Recommended
lighting arrangement includes positioning work stations away from direct sunlight or using
overhead lighting with baffles or louvers that reduces glare.
Working Habits
Long exposures to computer screens may cause eye strain. Symptoms include headache,
burning eyes, blurred vision and discomfort. To minimize eye strain, computer users can
adjust working habits to let their eyes relax and recover.
Break Times
Computer users should take some time away from the screen especially if working for
prolong hours. Generally, it is recommended to take short breaks (5 – 15 mins) after 1 –
2 hours of continuous computer works. Taking short and frequent breaks is more
advised than longer breaks.
Looking at Distant Objects
Users often blink less when in front of monitor screen. To minimize eye strain and
dryness, users should rest the eye periodically by focusing on objects that are far away.
Eye and Neck Exercises
Certain exercise reduces eye strain and prevent early onset of musculo-skeletal
disorders. It is recommended to repeat these exercises often. However, should
symptoms persists it is recommended to consult a physician.
Exercises for the eye:
1. Alternate looking up and looking down while keeping the body and head upright.
2. Slowly roll your eyes to look to the left and right.
3. Roll eyes to look at objects on the upper right corner and then on lower right. Do same
thing to look at objects on the upper left and lower left.
Exercises for the neck:
1. Relax arm at the side. Bend head forward to slightly stretch the neck. Hold for 5 seconds.
2. Relax arm at the side. Turn head to the right. Hold for 5 seconds. Then turn head to the left.
3. Relax arm at the side. Swing head to the left. Hold for 5 seconds. Then swing head to the
right.

Chapter 2 Adjusting and using your monitor 2-4
Working Posture
Appropriate working position helps minimize eye discomfort. Seating position and ideal
placement of monitor are essential for a comfortable working experience.
Seating Position
Placing the monitor too far or too close may lead to eye strain. Far viewing distance causes
users to lean forward to see small texts, which strain the eyes and torso. Close viewing
distance, on the other hand, strains the eye resulting from exerting more effort to focus and
also causes the user to sit in awkward body posture (i.e. tilting the head, typing with
outstretched arms, etc.)
Recommended viewing distance between the eye and the monitor screen is 1.5 x the diagonal
of the screen. Solutions in meeting this required distance in cramped office situations include
pulling desk away from wall or divider to make room for monitor, using flat panel or
compact displays placing the monitor in the desk corner, or placing the keyboard in an
adjustable drawer to create a deeper working surface.
Lenovo monitors are design to maximize work space (e.g. having thin profiles, compatible for
ThinkCentre Tiny back mount, practical cable management, etc).

Chapter 2 Adjusting and using your monitor 2-5
Viewing Angle
Neck fatigue and pain may result from prolong turning of the head to see objects on the monitor
screen. To minimize this, position the monitor directly in front so the head, neck and torso face
forward to the screen. It is recommended that monitor should not be more than 35 degrees to the
right or left of the head.
Monitors should also not be placed too high or too low as this contributes to awkward posture
which results to muscle fatigue.
Reduce Flicker
Monitor flickers refer to repeated changes in monitor light intensity. It is caused by several
factors including but not limited to voltage fluctuations. Reducing flicker minimizes eye strain
and headaches. Lenovo monitors allow users to use high frequency display modes that can
effectively reduce flicker.
Low Blue Light
Concerns on blue light affecting eye health have risen over the years. Blue light have
wavelength between 300 nm to 500 nm. The monitors under default setting mode reduce blue
light emissions. The monitors achieve the requirement of Low blue Light (Hardware Solution)
Accessibility information
Lenovo is committed to providing greater access to information and technology to people with
disabilities. With assistive technologies, users can access information in the way most appropriate to
their disability. Some of these technologies are already provided in your operating system; others can be
purchased through vendors or accessed at:
https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php

Chapter 2 Adjusting and using your monitor2-6
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Note: The direct access controls are coloured.
Table 2-1. Direct access controls
NO. Joy Button/
Key
Description
1Press to open main menu while there is no any OSD on
the screen
2
Press to enter next level on main menu or sub menu
It is a shortcut key for directly opening brightness
adjustment bar while there is no any OSD on the screen.
3
Press to exit current OSD or return to previous level.
It is a shortcut key for directly opening brightness
adjustment bar while there is no any OSD on the screen.
4
(1) It is a shortcut key for directly opening volume
adjustment bar while there is no any OSD on the
screen.
(2) Press to move to next item on menu.
Press to decrease current value on adjustment bar.
5
(1) It is a shortcut key for directly opening volume
adjustment bar while there is no any OSD on the
screen.
(2) Press to move to last item on menu.
Press to Increase current value on adjustment bar.
6
(1) It is a shortcut key for directly opening the menu of
KVM mode while there is no any OSD on the screen.
(2) Press and hold for 3 seconds, opening the menu of
game mode.
7 It is a shortcut key for directly opening the menu of
input source while there is no any OSD on the screen.
8Power ON/OFF

Chapter 2 Adjusting and using your monitor 2-7
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD), as
shown below.
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that function.
If there is a sub-menu, you can move between options using or , then press to
select that function. Use or to make adjustments. Press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.