Lenovo EAM-400H User manual

EAM-400H
ATX Intel® Core™ i7/i5/i3
Industrial Motherboard
User’s Manual
Manual Rev.: 1.00
Revision Date: July 31, 2013
Leading EDGE COMPUTING

ii Revision History
Revision History
Revision Release Date Description of Change(s)
1.00 2013/7/31 Preliminary release

EAM-400H
Preface iii
Preface
© Copyright Lenovo 2018
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic, or other means in any
form without prior written permission of the manufacturer.
LIMITED AND RESTRICTED RIGHTS NOTICE:
If data or software is delivered pursuant to a General Services
Administration "GSA" contract, use, reproduction, or disclosure is
subject to restrictions set forth in Contract No.GS-35F-05925.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect,
special, incidental, or consequential damages arising out of the
use or inability to use the product or documentation, even if
advised of the possibility of such damages.
Environmental Responsibility
Lenovo is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) dire-
ctive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for Lenovo.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Using this Manual
Audience and Scope
The EAM-400H User’s Manual is intended for hardware
technicians and systems operators with knowledge of installing,
configuring and operating industrial grade systems.
Manual Organization
This manual is organized as follows:
Preface: Presents important copyright notifications, disclaimers,
trademarks, and associated information on the proper understand-
ing and usage of this document and its associated product(s).
Chapter 1, Introduction: Introduces the EAM-400H, its features,
applications, and specifications, including functional descriptions
and board layout.
Chapter 2, Hardware Information: Provides technical informa-
tion on connectors and jumpers for configuring the EAM-400H.
Chapter 3, Getting Started: Illustrates how to install components
on the EAM-400H such as CPU, heatsink, and memory modules.
Chapter 4, Driver Installation: Provides information on how to
install the EAM-400H device drivers.
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information by telephone through the
Customer Support Center.
Telephone Number: 400-810-8869, 01058859073

EAM-400H
Preface
v
NOTE:
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
NOTE:

vi Preface
This page intentionally left blank.

EAM-400H
Table of Contents vii
Table of Contents
Revision History...................................................................... ii
Preface .................................................................................... iii
List of Figures ........................................................................ ix
List of Tables .......................................................................... xi
1
Introduction ........................................................................ 1
1.1
Overview................................................................................ 1
1.2
Features ................................................................................ 2
1.3
Specifications ........................................................................ 3
1.4
Block Diagram ....................................................................... 5
1.5
Functional Description ........................................................... 6
1.6
Power Consumption .............................................................. 8
1.7
Mechanical Drawings .......................................................... 11
1.8
Package Contents ............................................................... 12
2
Hardware Information ...................................................... 13
2.1
Rear I/O Connectors ........................................................... 13
2.2
Board Layout ....................................................................... 17
2.3
Onboard Connectors & Jumpers ......................................... 19
2.4
Jumpers ............................................................................... 24
3
Getting Started ................................................................. 27
3.1
Installing the CPU ................................................................ 27
3.2
Installing the CPU Fan and Heatsink .................................. 31
3.3
Installing Memory Modules .................................................. 32
4
Driver Installation ............................................................. 35

viii Table of Contents
Important Safety Instructions ............................................ 37
Getting Service ..................................................................... 39

EAM-400H
List of Figures ix
List of Figures
Figure 1-1: EAM-400H Block Diagram ............................................... 5
Figure 1-2: EAM-400H Board Dimensions ....................................... 11
Figure 2-1: EAM-400H Rear I/O Layout ........................................... 13
Figure 2-2: EAM-400H Board Layout ............................................... 17

x
List of Figures
This page intentionally left blank.

EAM-400H
List of Tables xi
List of Tables
Table 1-1: EAM-400H General Specifications .................................. 3
Table 1-2: Core™ i7-3770 Power Consumption ............................... 8
Table 1-3: Core™ i3-3220 Power Consumption ............................... 9
Table 1-4: Pentium® G2120 Power Consumption .......................... 10
Table 2-1: EAM-400H Board Layout Legend .................................. 18

xii List of Tables
This page intentionally left blank.

EAM-400H
Introduction 1
1
Introduction
1.1
Overview
The Lenovo EAM-400H is an ATX industrial motherboard
supporting the 3rd Generation Intel® Core™ i7/i5/i3 and Pentium®
processors in LGA1155 package to deliver a scalable high
performance platform for a wide array of industrial applications.
The EAM-400H supports 22nm process CPUs at up to 3.4 GHz
with integrated graphics and memory controllers, Direct Media
Interface (DMI) and Flexible Display Interface (FDI) connectivity to
the Intel® H61 Express Chipset. Dual-channel DDR3 1333/1600
MHz memory is supported up to a maximum of 16 GB in two
DIMM slots.
These advanced features, coupled with integrated graphics, one
PCI Express x16 slot, two PCI Express x1 slots, four PCI slots,
dual PCI Express-based Gigabit Ethernet, SATA 3 Gb/s and audio
interfaces make the EAM-400H ideal for automation control,
medical, test & measurement, and telecom applications requiring
a high-performance, easy-to-deploy and reliable mainboard.

2 Introduction
1.2
Features
► ATX form factor (305 mm x 218 mm)
► Supports 3rd Generation Intel® Core™ i7/i5/i3 and
Pentium® processors in LGA1155 package
► Integrated Intel® HD Graphics
► One PCIe x16 slot, two PCIe x4 slots (with PCIe x1 signals),
four PCI slots
► Dual Gigabit Ethernet
► 10x USB 2.0 ports (6x onboard, 4x on faceplate)
► 4x SATA 3 Gb/s ports
► VGA, DVI-D
► 5x RS-232 + 1x RS-232/422/485
► Watchdog Timer, Hardware Monitor
► Realtek ALC892 HD audio codec
► 16in+16out DIO
► 2x Mini-DIN for PS/2 keyboard/mouse
► RoHS compliant

EAM-400H
Introduction 3
1.3
Specifications
System
CPU
Intel® Core™ (LGA115)
• Intel
®
Core™ i7-3770, 3.40 GHz, 8M Cache, 22nm, 77W TDP (4C)
• Intel
®
Core™ i5-3550S, 3.0 GHz, 6M Cache, 22nm, 65W TDP (4C)
• Intel
®
Core™ i3-3220, 3.30 GHz, 3M Cache, 22nm, 55W TDP (2C)
• Intel
®
Pentium® G2120, 3.10 GHz, 3M Cache, 22nm, 55W TDP (2C)
• Intel
®
Celeron® G1620, 2.7 GHz, 2M Cache, 22nm, 55W TDP (2C)
• Intel
®
Celeron® G540, 2.5 GHz, 2M Cache, 32nm, 65W TDP (2C)
• Intel
®
Pentium® Dual Core G850, 2.9 GHz, 3M Cache, 32nm, 65W
TDP (2C)
Chipset Intel® H61 Express Chipset
Memory 2x 240-pin DIMM sockets
Dual-channel DDR3 1333/1600 MHz (up to 16 GB)
BIOS AMIBIOS in 32-Mbit SPI Flash
Audio Realtek ALC892 HD codec
Supports line-in, line-out and mic-in
Watch Dog
Timer
1-255 second or 1-255 minute programmable and can generate
system reset.
Hardware
Monitor
CPU/System temperature, CPU fan speed and onboard DC
voltage
Operating
Systems
•
Windows XP, 7, 32/64-bit
•
Fedora 17
•
Red Hat Enterprise Linux 6.2
I/O Interfaces
Serial ATA
•
4x SATA 3 Gb/s ports
Onboard I/O
•
3x USB 2.0 pin headers (6 ports)
•
5x RS-232 + 1x RS-232/422/485 (COM6)
•
16in+16out DIO ports
•
1x front panel pin header
Rear I/O
•
2x Gigabit Ethernet RJ45 ports
•
4x USB 2.0 ports
•
1x VGA connector
•
1x DVI-D port
•
2x PS2 keyboard/mouse ports
•
3x audio jacks (line-in, line-out and mic-in)
Table 1-1: EAM-400H General Specifications

4 Introduction
Expansion Slots
•
1x PCIe-x16 Gen 2
•
2x PCIe x4 slot (with PCIe x1 signal)
•
4x PCI slots
Display
Graphics Integrated Intel® HD Graphics
VGA Dsub-15 connector, up to 2048x1536 @ 75 Hz
DVI-D DVI-D connector, up to 1920x 1200 @ 60 Hz
Ethernet
Controller
•
Dual Gigabit Ethernet (Realtek® 8111E Gigabit Ethernet
Controller)
•
Supports Preboot Execution Environment (PXE),
Wake-On-LAN
Ports Two RJ-45 Ethernet ports
Mechanical and Environment
Form Factor ATX Industrial Motherboard
Dimensions 305 mm x 218 mm (L x W)
Operating Temp.
0ºC to 60ºC
Storage Temp. -20ºC to 80ºC
Rel. Humidity 10% to 90% non-condensing
Safety CE, FCC Class A
Table 1-1: EAM-400H General Specifications

EAM-400H
Introduction 5
PCIe to
1.4
Block Diagram
PCIe x16 Gen 2.0
for Discrete Graphic
3
3r rd d G Ge en n I In nt te el l
C
Co or re e i i7 7/ /i i5 5/ /i i3 3
Dual Channel
DDR3 1333/1600
Max. 16GB
d
du ua al l/ /q qu ua ad d c co or re e
3
32 2/ /2 22 2n nm m
VGA
DVI-D
10 USB 2.0 Ports
x2 Display Link
x4 DMI
I
In nt te el l
H
H6 61 1
P
PC CH H
PCI
4 PCI slots
Bridge
2 PCIe x4 slots
w/ PCIe x1 signal
Realtek
8111E
Dual
4 SATA Ports
at 3.0Gb/s
SPI
SM
Bus
Realtek
8111E
GbE
HD Audio
Realtek
HD Audio
ALC892
BIOS
DIO17-32
DIO1-16
GPIO
Expansion
KB/MS
Super I/O
Nuvoton
NCT6776F
Fintek
81216AD
COM1-2
Figure 1-1: EAM-400H Block Diagram
COM3
-
6

6 Introduction
1.5
Functional Description
Processor Support
The EAM-400H is an industrial motherboard supporting the 3rd
generation Intel® Core™ processor family (Intel® Core™ i7/i5/i3)
in LGA1155 socket. An integrated memory controller supports
dual channel DDR3 1333/1600 MHz and Intel® HD Graphics is
integrated onboard the CPU. The CPU provides a PCI Express
x16 for external graphics or expansion. Direct Media Interface
(DMI) and Flexible Display Interface (FDI) provide connectivity to
the Intel® H61 Express Chipset.
Intel® H61 Express Chipset
The Intel® BD82H61 Platform Controller Hub (PCH) combines
with the processor to provide a compact yet powerful 2-chip solu-
tion. Direct Media Interface (DMI) is the chip-to-chip connection
between the processor and PCH. Intel® Flexible Display Interface
carries display traffic from the integrated graphics in the processor
to the legacy display connectors in the PCH. The PCH supports all
other required interfaces including PCI Express, SATA 3 Gb/s,
USB 2.0, PCI, LPC, and SPI.
Dual-Channel DDR3 Memory
To meet the requirements of memory-intensive applications, the
EAM-400H has a dual-channel memory architecture supporting
DDR3 1333/1600 MHz DIMMs. The key advantages of DDR3 are
the higher bandwidth and the increase in performance at lower
power than DDR2. DDR3 memory technology meets the require-
ments of the latest 3D graphics, multimedia, and network applica-
tion, and boosts system performance by eliminating bottlenecks.
Gigabit Ethernet
The EAM-400H utilizes two Realtek® RTL8111E Gigabit Ethernet
Controllers connected to the PCI-E bus of the H61 PCH. Wake-
on-LAN and PXE are supported.

EAM-400H
Introduction 7
Serial ATA
The EAM-400H provides four SATA 3 Gb/s ports.
Hardware monitoring
A built-in, proactive hardware monitoring system in the Super I/O
monitors the CPU temperature, CPU fan speed, and voltage levels
to prevent overheating and/or component damage, effect timely
failure detection, and ensure stable supply of current for critical
components.
Watchdog Timer
The watchdog timer (WDT) monitors system operations based on
user-defined configurations. The WDT can be programmed for dif-
ferent time-out periods, such as from 1 to 255 seconds or from 1 to
255 minutes. The WDT generates a reset signal, then a reset
request, after failure to strobe it within the programmed time
period. A register bit may be enabled to indicate if the watchdog
timer caused the reset event. The WDT register is cleared during
the power-on sequence to enable the operating system to take
appropriate action when the watchdog generates a reboot.

8 Introduction
1.6
Power Consumption
Test Configuration
Memory 2x Transcend 8GB DDR3 1600 DIMM
(CL11 SEC K4B4G0846B-HYK0 8GB)
Graphics Intel® Graphics Media Accelerator HD (integrated)
Storage Seagate ST9160412AS Momentus 7200.4 160GB
Power Supply Sunpower SPX-6500P1 500W
Intel® Core™ i7-3770 Processor (8M Cache, 3.40 GHz)
S1
Power Req. +5V +12V +3.3V Total
Current (A) 0.64 1.04 0.46 —
Power (W) 3.2 12.48 1.52 17.20
Idle Load
Power Req. +5V +12V +3.3V Total
Current (A) 1.32 0.59 0.50 —
Power (W) 6.6 7.08 1.65 15.33
CPU Max
Power Req. +5V +12V +3.3V Total
Current (A) 1.35 8.00 0.82 —
Power (W) 6.75 96.0 2.71 105.45
Max. Load
Power Req. +5V +12V +3.3V Total
Current (A) 1.76 7.41 0.65 —
Power (W) 8.8 88.92 2.14 99.86
Table 1-2: Core™ i7-3770 Power Consumption