lepow C2 Series User manual

[e-mail]

[e-mail]

Audio and video signal transmission
Power supply support, reverse charging, compatible
with PD2.0 power supply protocol, support 5-20V voltage input.
.
.
.
.

3.5mm audio out port:
Connect external speakers, headphones or digital audio equipment
ESC/Power Button：
1. Click the ESC/Power Button, and the signal will be displayed in the upper
right corner of the screen.
2. Click the button to exit the menu.
3. Long press the button for three seconds to turn off/on.
+/Volume Shortcut:
1. Click to display the sound progress bar. Continue to long press to increase volume.
2. Move the key up in the menu.
Menu/Confirm Button:
1. Menu
2. After pressing the menu, its function is "confirm".
-/Brightness Shortcut:
1. Click to display the brightness progress bar. Continue to long press to reduce brightness.
2. Move the key down in the menu.
If there are any questions,
please e-mail us by [e-mail]

display
display
display display

display

HDMI/mini DP
HDMI/mini DP

display
T
When there is no external power supply, the cell phone supplies. Power to the
monitor. (The mobile phone may not support a 5V/2A or above power supply, in
this case, the monitor will activate the power saving mode and the brightness will
be automatically adjusted to under 30% for stable use.)

If there are any questions,
please e-mail us by [e-mail]

it
display

display

1. Press the Menu/Confirm Button to activate the OSD menu
2. Press the +/- button up and down to choose your settings
3. Press the Menu/Confirm Button to confirm
4. Press the ESC/Power Button to return to the previous page

4
Note: If there is no 5V/2A or above power supply, the monitor will activate the
power saving mode and the brightness will be automatically adjusted to under 30%
for stable use.

2

If there are any questions about settings,
please e-mail us by [e-mail]