LEVENGER HARLEQUIN LIBRARY STAND User manual

Assembling the stand
Lay the right side (G) on a flat surface. Insert 7 dowels into the drilled
holes. Using the screwdriver, insert 6 cam lock screws into the plastic
inserts in preparation for attaching the rear panel, bottom and top shelf.
Attach the rear panel (B) by sliding over dowels. Attach the bottom (D),
using 2 cam lock nuts to tighten. Attach the top shelf (C) using 2 cam lock
nuts to tighten.
Lay the left side (F) on a flat surface and repeat the steps above.
2
HARLEQUIN LIBRARY STAND
Checking the parts
Unpack your library stand, and set all of the parts on a soft surface to avoid
scratching. You should have all of the parts listed below, as well as the
hardware listed.
Our Harlequin Library Stand brings stature to
reading, with a display space fitting for a large
art book or dictionary, especially with the deep
lip to hold it. The bright-field magnifier nestled
in the leather-lined well has a 3x acrylic lens
that draws light to its surface for even sharper
magnification. A sliding tray offers a handy
spot for writing notes and slides to either the
right or left side. The stand also works as a
lectern. When fully assembled, it measures
21W x 20D x 411⁄2H.
1
BUILDING YOUR STAND
a 18 dowels
b 12 cam lock nuts
c 12 cam lock screws
d 2 bolts (1⁄4" x 1")
e 2 locking washers
f 2 flat washers
gscrewdriver

© 2006 Levenger (FTS•FS0170•07/31/06)
DARKENING OF YOUR WOOD
Your wood will darken with exposure to
light. This is a natural process and
enhances the beauty of the wood; you
should, however, be mindful of uneven
darkening. We recommend you not
permanently rest objects on exposed
surfaces during the first two weeks.
During this period, an object left in the
same place for even a few days will show
a lighter color beneath. After the break-in
period you can leave objects in place
since color development will be complete.
CARE OF LEVENGER WOOD PRODUCTS
When dusting your wood, use a clean, soft
cloth by itself or with a spray polish,
following the grain pattern.
EFFECTS OF CLIMATE
Wood products respond to changes in
humidity. In dry seasons, the wood will shrink
a bit, while it will expand again in more
humid weather. Fine furniture and wood
products are built to allow for these natural
changes. To minimize the effects of climate,
keep your wood products out of direct
sunlight and drafts from air or heating vents.
SPECIAL NOTE ON YOUR
WOOD PRODUCTS
Attaching the top
Stand the unit upright. Insert 4 dowels into the top (A). Place 4 cam lock
screws into the plastic inserts. Remove the magnifier panel (H) by undoing
the 2 bolts. This will allow access to the underside of the top. Then fasten
the top using 4 cam lock nuts, attaching them from the underside. Replace
the magnifier panel (H), using the 2 bolts to secure it.
3Inserting the sliding tray
Slide in the tray (E), then secure
with a dowel from underneath.
4
Levenger Distribution Center
3530 E. Raines Road, Suite 101 Memphis, TN 38118
800-545-0242 or 901-375-9318 Fax: [phone] or 901-375-8346
levenger.com [e-mail]
We hope you enjoy your Harlequin Library Stand. Email us at
[e-mail] and tell us how you use it. Questions?
Call us toll-free at 800-545-0242 and we will be happy to assist you.
To place an order, please call 800-544-0880. To join our Preferred
Customer E-list and be the first to see our new merchandise, please
sign up on the homepage of Levenger.com.