Lexicon RT-20 - REV 1 - 5-06 User manual

RT-20 Universal Disc Player
User Guide

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufac-
turer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
another apparatus (including amplifiers)
that produces heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polar-
ized plug has two blades with one wider
than the other. A grounding-type plug has
two blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs, conve-
nience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories speci-
fied by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the manufac-
turer, or sold with the apparatus. When a
cart is used, use caution when moving the
cart/appartus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the
apparatus has been damaged in any way,
such as when a power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
• Refer to the manufacturer’s operating
instructions for power requirements. Be
advised that different operating voltages may
require the use of different line cord and/or
attachment plug.
• Do not install the unit in anunventilated rack,
or directly above heat-producing equipment
such as power amplifiers. Observe the maxi-
mum ambient operating temperature listed in
the product specification.
• Never attach audio power amplifier outputs
directly to any of the unit’s connectors.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation. This equipment gen-
erates, uses, and radiates radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio or television reception,
which can be determined by turning the equip-
ment off and on. The user is encouraged to try
to correct the interference by one or more of
the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and the receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
television technician for help.
To reduce the risk of fire or electric
shock, do not expose this appara-
tus to rain or moisture. Do not
place objects containing liquid,
such as vases, on this apparatus.
WARNING

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved.
“HDMI,” the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
“DTS” and “DTS 96/24” are trademarks of Digital Theater Systems, Inc.
“SACD” and the SACD logo are trademarks of Sony Electronics, Inc.
“TosLink” is a registered trademark of Toshiba Corporation.
“Lexicon,” “LOGIC7,” and the L7 logo are registered trademarks of Harman International Industries, Inc. U.S. Patent Nos. D454,553;
D454,860; 5,796,844; 5,870,480 and other worldwide patents issued and pending.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
© 2006 Harman Specialty Group. All rights reserved.
This document should not be construed as a commitment on the part of Harman Specialty Group. The information it contains is
subject to change without notice. Harman Specialty Group assumes no responsibility for errors that may appear within this document.
3 Oak Park
Bedford, MA 01730-1413 USA
Tel [phone]
Fax [phone]
www.harmanspecialtygroup.com
Customer Service
Telephone: [phone]
Sales Fax: [phone]
Service Fax: [phone]
Part No. 070-17261 | Rev 1 | 05/06

Introduction Lexicon
ii
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
• Do not remove the cover from the unit.
• Do not insert anything into the unit through the ventila-
tion holes.
• Do not handle the mains lead with wet hands.
• Make a space of about .33ft (0.1m) around the unit.
Slots and openings on the case are provided for ventilation.
To ensure reliable operation of the unit, to protect it from
overheating, and to prevent fire hazard, these openings must
not be blocked or covered with items such as newspapers,
table cloths, or curtains. In addition, do not place the unit on
a thick carpet, bed, sofa, or fabric with a thick pile.
Before plugging in the unit for the first time, read the following
carefully: the available power supply voltage differs among
countries and regions. Make sure the power supply voltage
of the area where this unit will be used meets the required
voltage (e.g., 230V or 120V) written on the rear panel.
Do not place naked flame sources, such as lit candles, on the
unit. Naked flame sources might accidentally fall down,
causing fire to spread over the unit.
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radia-
tion exposure.
Note:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FOR CANADIAN MODEL:
This Class B digital apparatus complies with Canadian ICES-003.
POUR LE MODELE CANADIEN:
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 due
Canada.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
WARNING
WARNING
WARNING
CAUTION!
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LASER CLASE 1

RT-20 Universal Disc Player Introduction
iii
OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection against volt-
age surges and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode. See Figure A
below.
Figure A
'ROUND
#LAMP
%LECTRIC
3ERVICE
%QUIPMENT
.%#.ATIONAL%LECTRICAL#ODE
!NTENNA
,EAD)N7IRE
!NTENNA$ISCHARGE
5NIT.%#3ECTION

'ROUNDING#ONDUCTORS
.%#3ECTION
'ROUND#LAMPS
0OWER3ERVICE'ROUNDING
%LECTRODE3YSTEM
.%#!RT 0ART(

Introduction Lexicon
iv
DOCUMENTATION CONVENTIONS
This document contains general safety, installation and operation instructions for the RT-20 Universal Disc Player. It is important to read this
user guide before attempting to use the product. Pay particular attention to safety instructions.
The following symbols are used in the document:
Appears on the component to indicate the pres-
ence of uninsulated, dangerous voltage inside
the enclosure...voltage that may be sufficient to
constitute a risk of shock.
Appears on the component to indicate impor-
tant operating and maintenance instructions in
the accompanying literature.
Calls attention to a procedure, practice, condi-
tion or the like that, if not correctly performed
or adhered to, could result in injury or death.
Calls attention to a procedure, practice, condi-
tion or the like that, if not correctly performed
or adhered to, could result in damage or
destruction to part or all of the product.
Calls attention to information that is essential to
highlight.
• This document uses the term “DVD” to refer to DVD-V, DVD-A,
DVD-R, and DVD-RW formats. Otherwise, this document uses
the term DVD-V to refer to DVD Video format, DVD-A to refer
to DVD Audio format, and DVD-R/RW to refer to DVD-R and
DVD-RW formats.
• This document uses the term “CD” to refer to Audio CD, CD-R,
CD-RW, and Video CD formats. Otherwise, this document uses
the term Audio CD to refer to Audio CD format, CD-R/RW to
refer to CD-R and CD-RW formats, and Video CD to refer to
Video CD format.
• This document uses the term “MP3” to refer to CD-R/RW
formats that include MP3 tracks.
• This document uses the term “display device” to refer to televi-
sion screens, monitors, and projectors. Unless otherwise indi-
cated “display device” is not specific to one particular device.
WARNING
CAUTION!
Note:

RT-20 Universal Disc Player Introduction
v
Table of Contents
Documentation Conventions........................................................iv
Table of Contents......................................................................... v
Important Safety Instructions.......................................................vii
Wichtige Sicherheitshinweise.......................................................vii
Instrucciones De Seguridad Importantes.....................................viii
Instructions Importantes Relatives À La Sécurité..........................viii
Importanti Norme Di Sicurezza ....................................................ix
Instruções Importantes De Segurança...........................................ix
Vigtig Information Om Sikkerhed ................................................. x
Tärkeitä Turvallisuusohjeita........................................................... x
Viktig Informasjon Om Sikkerhet ..................................................xi
Viktiga Säkerhetsföreskrifter..........................................................xi
Unpacking and Inspection...........................................................xii
Auspacken und Überprüfung.......................................................xii
Desembalaje e Inspección ...........................................................xii
Contenu de L’emballage et Inspection ........................................xii
Disimballaggio ed Ispezione ........................................................xii
Retirando a Embalagem e Inspecionando ....................................xii
Getting Started
About The RT-20.......................................................................1-2
Highlights ............................................................................. 1-2
Product Registration............................................................... 1-3
Installation Considerations.........................................................1-3
DVD-V Regions..........................................................................1-4
Disc Compatibility.....................................................................1-4
Discs to Avoid ...........................................................................1-8
Disc Care & Handling................................................................1-8
Loading Discs............................................................................1-8
Remote Control Battery Installation ...........................................1-9
Quick Start Guide....................................................................1-10
Basic Operation
Front Panel Overview ................................................................ 2-2
Rear Panel Overview.................................................................. 2-7
Rear Panel Connections........................................................... 2-10
Remote Control Overview ....................................................... 2-13
Operation Considerations ................................................... 2-13
Remote Control Command Matrix ...................................... 2-13
Setup
Top Level Menus....................................................................... 3-2
Setup Menu .............................................................................. 3-3
Setup Menu: Language Setup ................................................ 3-3
Setup Menu: Audio Setup 1 ................................................... 3-6
Setup Menu: Audio Setup 2 ................................................. 3-16
Setup Menu: Video Setup..................................................... 3-18
Setup Menu: Parental Setup ................................................ 3-24
Setup Menu: Others Setup...................................................3-26
HDMI Menu Options............................................................ 3-29
Video Adjustment Setup.......................................................3-35
Disc Menu............................................................................... 3-41
Title Menu .............................................................................. 3-41
Function Menu........................................................................ 3-42
Playback Modes
Navigating Disc Menus ............................................................. 4-2
Disc Menu Command Matrix................................................. 4-3
Selecting Disc Settings .............................................................. 4-5
Playback Mode Descriptions......................................................4-9
Playback Modes Table.......................................................... 4-10
Program List Requirements Table ......................................... 4-23

Introduction Lexicon
vi
Troubleshooting & Maintenance
Troubleshooting ........................................................................5-2
Routine Maintenance...............................................................5-14
Restoring Factory-default Settings............................................5-14
Appendix
Specifications.............................................................................A-2
Declaration of Conformity .........................................................A-3
Installation Worksheet ...............................................................A-4
Index
Limited Warranty ...........................................Inside Back Cover

RT-20 Universal Disc Player Introduction
vii
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
1 Save these instructions for later use.
2 Follow all instructions and warnings marked on the unit.
3 Always use with the correct line voltage. Refer to the manufacturer’s
operating instructions for power requirements. Be advised that different
operating voltages may require the use of a different line cord and/or
attachment plug.
4 Do not install the unit in an unventilated rack, or directly above heat pro-
ducing equipment such as power amplifiers. Observe the maximum ambi-
ent operating temperature listed in the product specification.
5 Slots and openings on the case are provided for ventilation; to ensure
reliable operation and prevent it from overheating, these openings must
not be blocked or covered. Never push objects of any kind through any of
the ventilation slots. Never spill liquid of any kind on the unit.
6 Never attach audio power amplifier outputs directly to any of the unit’s
connectors.
7 To prevent shock or fire hazard, do not expose the unit to rain or mois-
ture, or operate it where it will be exposed to water.
8 Do not attempt to operate the unit if it has been dropped, damaged,
exposed to liquids, or if it exhibits a distinct change in performance indi-
cating the need for service.
9 This unit should only be opened by qualified service personnel. Remov-
ing covers will expose you to hazardous voltages.
This triangle, which appears on your component, alerts you to the
presence of uninsulated, dangerous voltage inside the enclo-
sure…voltage that may be sufficient to constitute a risk of shock.
This triangle, which appears on your component, alerts you to
important operating and maintenance instructions in this accompa-
nying literature.
DEUTSCH
WICHTIGE SICHERHEITSHINWEISE
1 Bewahren Sie diese Anleitungen zur späteren Benutzung auf.
2 Befolgen Sie alle Anleitungen und alle Warnhinweise auf dem Gerät
3 Betreiben Sie das Gerät immer mit der korrekten Netzspannung. Ang-
aben über den Strombedarf entnehmen Sie bitte den Betriebsanweisun-
gen des Herstellers. Bei unterschiedlichen Betriebsspannungen kann die
Verwendung anderer Netzkabel und/oder Anschlußstecker erforderlich
werden.
4 Bauen Sie das Gerät nie in ein unbelüftetes Rack oder direkt über Wärme
erzeugenden Geräten wie Verstärkern ein. Beachten Sie die in der
Produktspezifikation aufgeführte maximale Umgebungstemperatur für
den Betrieb.
5 Schlitze und Öffnungen in der Box dienen der Belüftung, damit das Gerät
zuverlässig läuft und sich nicht überhitzt. Diese Öffnungen dürfen nicht
abgedeckt oder blockiert werden. Auch dürfen keine Gegenstände in sie
hineingesteckt werden. Verschütten Sie niemals Flüssigkeiten, gleich
welcher Art, auf das Gerät.
6 Schließen Sie niemals Stromausgänge des Audioverstärkers direkt an
das Gerät an.
7 Zur Vermeidung von elektrischen Schlägen oder Brandgefahr darf das
Gerät weder Regen noch Feuchtigkeit ausgesetzt oder an Orten betrie-
ben werden, wo es mit Wasser in Berührung kommen kann.
8 Versuchen Sie nie, das Gerät zu betreiben, wenn es fallen gelassen, bes-
chädigt oder Flüssigkeiten ausgesetzt wurde oder wenn ein deutlicher
Leistungsunterschied zu verzeichnen ist, der darauf hinweist, dass es
gewartet werden muss.
9 Dieser Apparat sollte nur von qualifizierten Fachleuten geöffnet werden.
Das Abnehmen von Abdeckungen setzt Sie gefährlichen Spannungen aus.
Dieses Dreieck, welches auf Ihrem Bauteil angebracht ist, warnt
Sie vor dem Vorhandensein nicht isolierter gef hrlicher Spannung
im Gerät. Diese Spannung kann so hoch sein, dass das Risiko
eines Stromschlags besteht.
Dieses Dreieck, welches auf Ihrem Bauteil angebracht ist, macht
Sie auf wichtige Betriebs- und Wartungshinweise in diesen Hin-
weisen aufmerksam.
US
US DE DE

Introduction Lexicon
viii
ESPAÑOL
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
1 Guarde estas instrucciones para futuras referencias.
2 Siga todas las instrucciones y tenga en cuenta las advertencias que
aparecen en la unidad y en las instrucciones de funcionamiento.
3 Utilice siempre la tensión de línea correcta. Consulte las instrucciones
del fabricante, donde se especifican los requisitos de alimentación.
Tenga en cuenta que unas tensiones operativas diferentes pueden pre-
cisar de la utilización de diferentes cables de alimentación y/o enchufes.
4 No instale la unidad en un rack sin ventilación, o directamente sobre
equipos que generen calor, como amplificadores de potencia. Tenga en
cuenta la temperatura operativa ambiental máxima que se detalla en las
especificaciones del producto.
5 Las ranuras y aberturas del equipo son para su ventilación - para garanti-
zar un funcionamiento fiable y evitar que la unidad se sobrecaliente, no
bloquee, cubra o inserte objetos en las aberturas. No derrame nunca
líquidos de ningún tipo sobre la unidad.
6 Nunca conecte directamente salidas de amplificadores de potencia de
audio a ninguno de los conectores de la unidad.
7 Para evitar descargas eléctricas o incendios, no exponga la unidad a la
humedad o la lluvia, ni la utilice donde pueda estar expuesta al agua.
8 No intente utilizar la unidad si ésta ha caído, se ha dañado, ha estado
expuesta a líquidos, o si muestra un cambio importante en sus presta-
ciones, lo cual indicaría la necesidad de una reparación.
9 Das Esta unidad deberá ser abierta únicamente por personal calificado.
Si usted quita las coberturas se expondrá a voltajes peligrosos.
Este triangulo, que aparece en su componente, alerta de la pres-
encia de una tensi n peligrosa no aislada en el interior del equipo
- una tensi n que puede ser suficiente como para constituir un
riesgo de descarga el ctrica.
Este triangulo, que aparece en su equipo, le alerta de instruc-
ciones operativas y de mantenimiento importantes en los docu-
mentos que acompa an el producto.
FRANÇAIS
INSTRUCTIONS IMPORTANTES RELATIVES À LA
SÉCURITÉ
1 Conservez ces instructions pour pouvoir vous y référer ultérieurement.
2 Suivez toutes ces instructions et tenez compte de tous les avertissements
indiqués sur l’appareil et dans la documentation fournie avec l’appareil.
3 Utilisez toujours la tension secteur correcte. Consultez les instructions du
fabricant précisant les caractéristiques d’alimentation à respecter. Atten-
tion, le type de cordon secteur et/ou de prise secteur peut varier selon
des tensions en vigueur dans l’installation.
4 N’installez pas l’appareil dans un Rack mal ventilé ou directement au-
dessus d’un appareil dégageant de la chaleur comme un amplificateur de
puissance. Respectez la température maximale de fonctionnement pré-
cisée dans les caractéristiques techniques.
5 Les ouvertures dans le boîtier assurent la bonne ventilation de l’appareil,
évitent toute surchauffe et assurent le bon fonctionnement du système.
Veillez à ne pas obstruer, couvrir ou insérer d’objets dans ces ouvertures.
Veillez à ne pas renverser de liquide sur l’appareil.
6 Ne reliez jamais directement les sorties audio des amplificateurs de puis-
sance aux connecteurs de l’appareil.
7 Afin d’éviter tout risque d’électrocution ou d’incendie, n’exposez pas
l’appareil à la pluie ou à l’humidité ; ne l’utilisez pas dans des endroits
exposés aux projections de liquides.
8 N’essayez pas d’utiliser l’appareil si celui-ci est tombé, a été endom-
magé, exposé à des projections de liquides ou si vous constatez des dys-
fonctionnements nécessitant l’intervention d’un technicien spécialisé.
9 Cet appareil ne doit être ouvert que par un personnel de service qualifié.
En enlevant les couvercles vous vous exposez à des tensions électriques
dangereuses.
Le symbole de l’ clair fl ch dans un triangle quilat ral sert alerter
l’utilisateur sur la pr sence l’int rieur de l’appareil de tensions non
isol es susceptibles de constituer un risque d’ lectrocution.
Le point d’exclamation dans un triangle quilat ral sert alerter l’utili-
sateur sur la pr sence de nombreuses instructions de mainte-
nance dans le manuel fourni avec l’appareil.
ES ES FR FR

RT-20 Universal Disc Player Introduction
ix
ITALIANO
IMPORTANTI NORME DI SICUREZZA
1 Conservare le presenti norme per l’utilizzo futuro.
2 Seguire sempre tutte le istruzioni e gli avvertimenti segnati sull’unità e
nelle istruzioni operative.
3 Utilizzare sempre la corretta tensione di alimentazione. Fare riferimento
al manuale del costruttore per le caratteristiche di alimentazione. Ten-
sioni di rete diverse necessitano anche di un diverso cavo con spine dif-
ferenti.
4 Non installare l’unità in un rack poco ventilato, o direttamente sopra
apparecchiature che producono calore, come amplificatori di potenza.
Controllare la massima temperatura ambientale di esercizio sulle speci-
fiche tecniche del prodotto.
5 Fori ed aperture nei pannelli sono necessari per garantire un corretta
ventilazione e prevenire surriscaldamenti. Queste aperture non devono
essere coperte o ostruite. Non inserire oggetti di alcun tipo nei fori di ven-
tilazione. Evitare il contatto con liquidi di qualsiasi genere.
6 Evitare di collegare le uscite di un amplificatore di potenza direttamente a
qualsiasi connettore dell’unità.
7 Per evitare il rischio di scosse elettriche non esporre il prodotto a pioggia
o umidità. Evitare l’uso dove possa essere esposto all’acqua.
8 Non tentare di utilizzare il prodotto se è caduto, se è stato a contatto con
liquidi, o mostra chiari segni di danneggiamento o cambio di prestazioni
che indicano la necessità di assistenza tecnica.
9 Ogni intervento sull’unità va eseguito esclusivamente da personale qual-
ificato. La rimozione della copertura comporta l’esposizione al pericolo di
folgorazione.
Il presente triangolo impresso sul componente avverte la pre-
senza di tensioni pericolose non isolate all interno della copertura
– tali tensioni rappresentano un pericolo di folgorazione.
Il presente triangolo impresso sul componente avverte l utente
della presenza nella documentazione allegata di importanti istruz-
ioni relative al funzionamento ed alla manutenzione.
PORTUGUESE
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
1 Guarde essas instruções para uso posterior.
2 Siga todas as instruções e fique atento aos avisos marcados na unidade
e nas instruções de operação.
3 Sempre use com a voltagem correta. Veja no manual de instruções do
fabricante qual a alimentação necessária. Lembre-se que voltagens de
operação diferentes podem precisar de um cabo ou plug diferentes.
4 Não instale a unidade em um suporte sem ventilação ou diretamente
acima de equipamentos que produzam calor, como transformadores.
Observe a temperatura ambiente máxima de operação indicada na espe-
cificação do produto.
5 O revestimento da unidade é provido de fendas e aberturas para venti-
lação – para assegurar uma operação confiável e evitar que a unidade se
superaqueça. Não bloqueie, cubra ou insira objetos nas aberturas.
Nunca derrube líquido de qualquer espécie na unidade.
6 Nunca ligue saídas de amplificadores de áudio diretamente a qualquer
dos conectores da unidade.
7 Para evitar danos de choque ou fogo, não exponha a unidade à chuva ou
umidade, ou opere-a onde haja exposição à água.
8 Não tente operar a unidade se ela for derrubada, danificada, exposta à
líquidos ou apresente uma mudança de performance notável, indicando
a necessidade de manutenção.
9 Esta unidade só deveria ser aberta através de pessoal de serviço qualifi-
cado. Removendo coberturas o exporão a voltagens perigosas.
Esse triângulo que aparece no seu console, alerta para a pre-
sença de voltagem perigosa e não isolada no recinto – voltagem
que pode ser suficiente para constituir um risco de choque.
Esse triângulo ques aparece no seu console alerta para
instruções importantes de operação e manutenção neste manual.
IT IT PT PT

Introduction Lexicon
x
DANSK
VIGTIG INFORMATION OM SIKKERHED
1 Gem denne vejledning til senere brug.
2 Følg alle anvisninger og advarsler på apparatet.
3 Apparatet skal altid tilsluttes den korrekte spænding. Der henvises til
brugsanvisningen, der indeholder specifikationer for strømforsyning. Der
gøres opmærksom på, at ved varierende driftsspændinger kan det blive
nødvendigt at bruge andre lednings- og/eller stiktyper.
4 Apparatet må ikke monteres i et kabinet uden ventilation eller lige over
andet udstyr, der udvikler varme, f.eks. forstærkere. Den maksimale
omgivelsestemperatur ved drift, der står opført i specifikationerne, skal
overholdes.
5 Der er ventilationsåbninger i kabinettet. For at sikre apparatets drift og
hindre over phedning må disse åbninger ikke blokeres eller tildækkes.
Stik aldrig noget ind igennem ventilationsåbningerne, og pas på aldrig at
spilde nogen form for væske på apparatet.
6 Udgangsstik fra audioforstærkere må aldrig sættes direkte i apparatet.
7 Apparatet må ikke udsættes for regn eller fugt og må ikke bruges i
nærheden af vand for at undgå risiko for elektrisk stød og brand.
8 Apparatet må aldrig bruges, hvis det er blevet stødt, beskadiget eller
vådt, eller hvis ændringer i ydelsen tyder på, at det trænger til eftersyn.
9 Dette apparat må kun åbnes af fagfolk. Hvis dækslet tages af, udsættes
man for livsfarlig højspænding.
Denne mærkat på komponenten advarer om uisoleret, farlig
spænding i apparatet - høj nok til at give elektrisk stød.
Denne mærkat på komponenten advarer om vigtig driftsog
vedligeholdsinformation i den tilhørende litteratur.
SUOMI
TÄRKEITÄ TURVALLISUUSOHJEITA
1 Säilytä nämä ohjeet tulevaa käyttöä varten.
2 Seuraa kaikkia yksikköön merkittyjä ohjeita ja varoituksia.
3 Käytä aina oikeaa verkkojännitettä. Tehovaatimukset selviävät valmista-
jan käyttöohjeista. Huomaa, että eri käyttöjännitteet saattavat vaatia
toisenlaisen verkkojohdon ja/tai-pistokkeen käytön.
4 Älä asenna yksikköä telineeseen jossa ei ole tuuletusta, tai välittömästi
lämpöä tuotavien laitteiden, esim. tehovahvistimien,
yläpuolelle.Ympäristön lämpötila käytössä ei saa ylittää tuotespesifikaa-
tion maksimilämpötilaa.
5 Kotelo on varustettu tuuletusreiillä ja -aukoilla. Luotettavan toiminnan
varmistamiseksi ja ylilämpenemisen välttämiseksi näitä aukkoja ei saa
sulkea tai peittää. Mitään esineitä ei saa työntää tuuletusaukkoihin.
Mitään nesteitä ei saa kaataa yksikköön.
6 Älä kytke audiotehovahvistimen lähtöjä suoraan mihinkään yksikön liit-
timeen.
7 Sähköiskun ja palovaaran välttämiseksi yksikkö ei saa olla sateessa tai
kosteassa, eikä sitä saa käyttää märässä ympäristössä.
8 Älä käytä yksikköä jos se on pudonnut, vaurioitunut, kostunut, tai jos sen
suorituskyky on huomattavasti muuttunut, mikä vaatii huoltoa.
9 Yksikön saa avata vain laitteeseen perehtynyt huoltohenkilö. Kansien
poisto altistaa sinut vaarallisille jännitteille.
Tämä kolmio, joka esiintyy komponentissasi, varoittaa sinua
eristämättömän vaarallisen jännitteen esiintymisestä yksikön
sisällä. Tämä jännite saattaa olla riittävän korkea aiheuttamaan
sähköiskuvaaran.
Tämä kolmio, joka esiintyy komponentissasi, kertoo sinulle, että
tässä tuotedokumentoinnissa esiintyy tärkeitä käyttö- ja ylläpito-
ohjeita.
DK DK FI FI

RT-20 Universal Disc Player Introduction
xi
NORSK
VIKTIG INFORMASJON OM SIKKERHET
1 Ta vare på denne veiledningen for senere bruk.
2 Følg alle anvisningene og advarslene som er angitt på apparatet.
3 Apparatet skal alltid anvendes med korrekt spenning. Produktbeskriv-
elsen inneholder spesifikasjoner for strømkrav. Vær oppmerksom på at
det ved ulike driftsspenninger kan være nødvendig å bruke en annen led-
ning- og/eller støpseltype.
4 Apparatet skal ikke monteres i skap uten ventilasjon, eller direkte over
varmeproduserende utstyr, som for eksempel kraftforsterkere. Den mak-
simale romtemperaturen som står oppgitt i produktbeskrivelsen, skal
overholdes.
5 Apparatet er utstyrt med ventilasjonsåpninger. For at apparatet skal være
pålitelig i bruk\ og ikke veropphetes, må disse åpningene ikke blokkeres
eller tildekkes. Stikk aldri noe inn i ventilasjonsåpningene, og pass på at
det aldri søles noen form for væske på apparatet.
6 Utgangsplugger fra audioforsterkere skal aldri koples direkte til apparatet.
7 Unngå brannfare og elektrisk støt ved å sørge for at apparatet ikke
utsettes for regn eller fuktighet og ikke anvendes i nærheten av vann.
8 Apparatet skal ikke brukes hvis det har blitt utsatt for støt, er skadet eller
blitt vått, eller hvis endringer i ytelsen tyder på at det trenger service.
9 Dette apparatet skal kun åpnes av fagfolk. Hvis dekselet fjernes, utsettes
man for livsfarlig høyspenning.
Komponenten er merket med denne trekanten, som er en advar-
sel om at det finnes uisolert, farlig spenning inne i kabinettet - høy
nok til å utgjøre en fare for elektrisk støt.
Komponenten er merket med denne trekanten, som betyr at den
tilhørende litteraturen inneholder viktige opplysninger om drift og
ved.
SVENSKA
VIKTIGA SÄKERHETSFÖRESKRIFTER
1 Spara dessa föreskrifter för framtida bruk.
2 Följ alla anvisningar och varningar som anges på enheten.
3 Använd alltid rätt nätspänning. Se tillverkarens bruksanvisningar för infor-
mation om effektkrav. Märkväl, att andra matningsspänningar eventuellt
kräver att en annan typs nätsladd och/eller kontakt används.
4 Installera inte enheten i ett oventilerat stativ, eller direkt ovanför utrustnin-
gar som avger värme, t ex effektförstärkare. Se till att omgivningens tem-
peratur vid drift inte överskrider det angivna värdet i
produktspecifikationen.
5 Behållaren är försedd med hål och öppningar för ventilering. För att
garantera tillförlitlig funktion och förhindra överhettning får dessa öppnin-
gar inte blockeras eller täckas. Inga föremål får skuffas in genom ventila-
tionshålen. Inga vätskor får spillas på enheten.
6 Anslut aldrig audioeffektförstärkarutgångar direkt till någon av enhetens
kontakter.
7 För att undvika elstöt eller brandfara får enheten inte utsättas för regn
eller fukt, eller användas på ställen där den blir våt.
8 Använd inte enheten om den har fallit i golvet, skadats, blivit våt, eller om
dess prestanda förändrats märkbart, vilket kräver service.
9 Enheten får öppnas endast av behörig servicepersonal. Farliga spännin-
gar blir tillgängliga när locken tas bort.
Denna triangel, som visas på din komponent, varnar dig om en
oisolerad farlig spänning inne i enheten. Denna spänning är even-
tuellt så hög att fara för elstöt föreligger.
Denna triangel, som visas på din komponent, anger att viktiga
bruksanvisningar och serviceanvisningar ingår i dokumentationen
i fråga.
NO NO SE SE

Introduction Lexicon
xii
Unpacking and Inspection
After unpacking the unit, save all packing materials in case the unit
ever needs to be shipped. Thoroughly inspect the modules and
packing materials for signs of damage. Report any damage to the
carrier at once; report equipment malfunction to the dealer.
Auspacken und Überprüfung
Bewahren Sie nach dem Auspacken des Geräts das Verpackungs-
material für den Fall auf, dass Sie das Gerät wieder versenden müs-
sen. Überprüfen Sie die Module und die Verpackung sorgfältig auf
Anzeichen von Beschädigung. Etwaige Schäden sind dem Trans-
porteur unverzüglich anzuzeigen; Funktionsstörungen sind dem
zuständigen Händler zu melden.
Desembalaje e Inspección
Después de desembalar la unidad, guarde todos los materiales de
embalaje por si alguna vez transportar la unidad. Inspeccione con
atención los módulos y los materiales de embalaje para comprobar
que no muestren desperfectos. Informe inmediatamente de cual-
quier desperfecto al transportista; informe de cualquier problema
de funcionamiento del equipo a su distribuidor.
Contenu de L’emballage et Inspection
Après avoir ouvert l’emballage, conservez-le pour tout retour.
Inspectez avec soin les modules et les matériaux d’emballage pour
tout signe de dommage. Veuillez rapporter immédiatement les
dommages auprès du transporteur. Les dysfonctionnements du
matériel doivent être signalés à votre revendeur.
Disimballaggio ed Ispezione
Dopo aver disimballato l’unità, salvi tutto il materiale d’imballag-
gio, in caso Lei abbia bisogno di spedire l’unità. Ispezioni attentam-
ente i moduli ed il materiale d’imballaggio per vedere se riportano
segni di danno. Riporti subito ogni segno di danno al corriere;
riferisca il malfunzionamento dell’attrezzatura al suo rivenditore.
Retirando a Embalagem e Inspecionando
Depois de desembalar a unidade, guarde a embalagem caso pre-
cise enviar a unidade para manutenção. Inspecione cuidadosa-
mente o módulo e a embalagem procurando sinais de dano. Avise
à loja qualquer tipo de dano ou mal funcionamento do equipa-
mento.
US
DE
ES
FR
IT
PT

1
Getting Started
About The RT-20........................................................................ 1-2
Highlights...................................................................................................... 1-2
Product Registration ......................................................................................1-3
Installation Considerations.......................................................... 1-3
DVD-V Regions........................................................................... 1-4
Disc Compatibility...................................................................... 1-4
Discs to Avoid ............................................................................ 1-8
Disc Care & Handling................................................................. 1-8
Loading Discs............................................................................. 1-8
Remote Control Battery Installation ............................................ 1-9
Quick Start Guide..................................................................... 1-10

Getting Started Lexicon
1-2
ABOUT THE RT-20
Thank you for purchasing the RT-20 Disc Player, a reference-quality
universal disc transport designed to provide superior audio and
video performance with virtually any 3- or 5-inch optical media disc
format. Based on leading-edge DVD and SACD research, the RT-20
supports DVD-V, DVD-A, DVD-R/RW, SACD, Audio CD, CD-R/RW,
Video CD, and SVCD formats.
The RT-20 incorporates High-Definition Multimedia Interface
(HDMI) technology which provides for direct uncompressed digital
transmission to the display device. HDMI delivers pristine images
free from any deterioration associated with analog interfaces. The
RT-20 also delivers exceptional sound quality with Dolby Digital,
DTS, and PCM (Linear or Packed) digital audio sources. In addition,
it supports most MP3 audio sources as well as JPEG files.
With rear panel connectors befitting a reference-quality player, the
RT-20 includes the standard composite and S-video output connec-
tors, as well as progressive-scan component video output on RCA
or professional-grade BNC connectors. High-precision 14-bit/
216MHz D/A converters provide a video image without degrada-
tion during analog conversion. The video component out feature
converts interlaced video signals to progressive video signals, dou-
bling the amount of video information sent to a compatible display
device. The result is a higher quality, more stable image with fewer
video artifacts.
The Video Adjust feature allows for exact, detailed adjustment of
video settings such as Progressive Motion, sharpness, white, black,
gamma, hue, and chroma levels, as well as luminance (DNR),
chrominance (CNR) noise reduction. The Progressive Motion feature
automatically converts film sources recorded at 24 frames-per-sec-
ond to 60 frames-per-second to create a more natural picture. The
RT-20 offers three banks of Video Adjust settings for storage of user-
defined Video Adjust settings.
Digital audio sources are available on S/PDIF or analog audio out-
put connectors. Three digital audio output connectors – one S/PDIF
coaxial, one S/PDIF optical, and one AES/EBU – allow for external
decoding and processing of Dolby Digital, DTS, and PCM (Linear or
Packed) sources. Alternatively, built-in 24-bit/192kHz D/A convert-
ers on all six analog audio output connectors allow high-bandwidth
formats such as DVD-A and SACD to deliver smooth, expansive
analog sound without sample rate conversion and digital word
length reduction.
Built to Lexicon standards, the RT-20 represents a solid investment
that integrates into the finest home theaters. With its extensive
compatibility, the RT-20 delivers exceptional performance whether
you are watching the latest widescreen DVD, displaying a slide-
show of your family album saved as JPEG files, or listening to old
favorites on SACD or the latest MP3s on CD-R. Even the most
demanding enthusiast will be impressed with its unbeatable combi-
nation of technological innovation, flexibility, and performance.
HIGHLIGHTS
• High-Definition Multimedia Interface (HDMI)
• DVD-V, DVD-A, and DVD-R/RW compatibility
• SACD compatibility
• Audio CD, CD-R/RW, Video CD, and SVCD compatibility
• 14-bit/216MHz D/A video conversion
• Progressive-scan component video output on BNC, RCA, or
D1/D2 (Mini-D Ribbon) connectors

RT-20 Universal Disc Player Getting Started
1-3
• True 2:3 pull-down for the finest film-based DVD reproduction
• Video Adjust for exact, detailed adjustment of video settings
• Three Video Adjust banks for user-defined settings
• 24-bit/192kHz D/A audio conversion
• Digital audio output on S/PDIF coaxial, S/PDIF optical, or AES/
EBU connectors
• Still Frame, Frame-by-Frame, Slow, Random, Repeat, and Program
playback modes
• Stored disc settings for up to 20 discs
•MP3andJPEGcompatibility
• Optional SACD speaker distance compensation
• Audio Synchronization capability
•CompositeandS-video output
• Trigger input connector
• IR input connector
• Serial control via RS-232C
• Intuitive user-interface
• Optional 19-inch rack mount kit
PRODUCT REGISTRATION
Please register the RT-20 within 15 days of purchase. Register on-
line at www.lexicon.com or complete and return the Product Regis-
tration Card attached to the back cover of this user guide. Retain
the original, dated sales receipt as proof of warranty coverage.
INSTALLATION CONSIDERATIONS
The RT-20 requires special care during installation to ensure optimal
performance. Pay particular attention to the items below and to
other precautions that appear throughout this user guide.
DO install the RT-20 on a solid, flat, level surface such as a table or
shelf or in a standard 19-inch equipment rack. An optional rack-
mount kit is available from authorized Lexicon dealers.
DOselect a dry, well-ventilated location out of direct sunlight.
DO NOT install the RT-20 on a surface that is unstable or unable
to support all four of its feet (unless the RT-20 is installed in an
equipment rack).
DO NOT stack the RT-20 directly above heat-producing compo-
nents such as power amplifiers and other stereo equipment that
generate heat during use. Avoid installing the RT-20 near radiators
and other heat-producing appliances.
DO NOT expose the RT-20 to high temperatures, direct sunlight,
humidity, steam, smoke, dampness, and excessive dust.
DO NOT install the RT-20 near unshielded TV or FM antennas,
cable TV decoders, and other RF emitting devices that might cause
interference. Replace unshielded cables with shielded cables when-
ever possible.
DO NOT prevent proper cooling. Do not block or cover ventila-
tion slots and openings on the RT-20 with items such as newspa-
pers, cloths, and curtains. Do not operate the RT-20 on a thick
carpet, bed, sofa, or fabric with a thick pile.

Getting Started Lexicon
1-4
DO NOT expose the RT-20 to sudden or drastic temperature
changes, as this might cause condensation to form on the RT-20
lens. Although condensation will not damage the RT-20, it might
temporarily impair performance. If this occurs, allow at least 1 hour
for condensation to evaporate before attempting to load a disc.
DO NOT obstruct the front panel display remote control sensor.
Unless the RT-20 is using the IR IN connector, the remote control
must be in line-of-sight with the front panel display remote control
sensor. See “OPERATION CONSIDERATIONS” on page 2-13 for
more information.
DVD-V REGIONS
The map shown below indicates DVD-V region codes for all areas of
the world. All DVD-Vs are marked with a region code, which is
often located on the disc packaging. The RT-20 rear panel is also
marked with a region code. The RT-20 is compatible with discs
marked with this same region code or with the ALL region code.
The RT-20 is not compatible with discs marked with other region
codes.
DISC COMPATIBILITY
The RT-20 is compatible with disc formats that meet the require-
ments listed in the tables that begin on the next page. Refer to
“DISC CARE & HANDLING” on page 1-8, “DISCS TO AVOID” on
page 1-8 and “NAVIGATING DISC MENUS” on page 4-2 for more
information.
Note:
The RT-20 is not compatible with DVD-ROM, DVD-RAM, or
CD-ROM (except those that include compatible MP3 tracks).

RT-20 Universal Disc Player Getting Started
1-5
Format Logo Disc Compatibility Requirements Additional Information
DVD-V The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
• Dolby Digital, DTS, MPEG, or PCM (Linear) digital
audio
•MPEG-2video
• Single- or double-sided discs
• Single- or dual-layered discs
Discs are divided into titles, which are further divided into chapters.
DVD-A The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
•LinearorPCM(Packed)digital audio (discs may also
include Dolby Digital, DTS, or MPEG digital audio
and MPEG-2 video)
•MPEG-2video
• Single- or double-sided discs
• Single- or dual-layered discs
Discs are divided into groups, which are further divided into tracks.
DVD-R/RW The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
• Discs recorded in DVD-V format
The RT-20 does not support:
• Unfinalized discs
• Discs that include MP3 tracks
• Copy-once protected discs
• The RT-20 may not allow playback of DVD-R/RWs recorded with a
personal computer if incorrect software application settings were used
during the recording process – even if the disc was recorded in a
compatible format. Refer to the software application documentation for
more information.
• The RT-20 may not allow playback of DVD-R/RWs recorded using certain
recorders, software or blank media.

Getting Started Lexicon
1-6
SACD The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
• Digital audio (DSD)
• Single-, dual-, or hybrid-layered discs
Discs are divided into tracks.
Audio CD The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
• PCM (Linear) digital audio
• Discs are divided into tracks.
• The RT-20 does not support the “CD” side of a DualDisc.
CD-R/RW The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
• Discs recorded in Video CD or Audio CD format
• Discs that include MP3 audio tracks that meet the
requirements outlined in the table on the next page
• Discs that are unfinalized, although some time infor-
mation (i.e. playback time) will not display
The RT-20 might not allow playback of CD-R/RWs recorded with a personal
computer if incorrect software application settings were used during the
recording process – even if the disc was recorded in a compatible format.
Refer to the software application documentation for more information.
Video CD The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
• MPEG-1 digital audio and MPEG-2 video
Discs are divided into tracks.
SVCD The RT-20 supports:
• 5-inch (12cm) or 3-inch (8cm) discs
• PCM (Linear) digital audio
Discs are divided into tracks.
Format Logo Disc Compatibility Requirements Additional Information
Note:
The RT-20 does not support the “CD” side of a DualDisc.