LG CM9950 User manual

www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference.
CM9950 (CM9950 , CMS9950F)
OWNER’S MANUAL
MINI HI-FI
SYSTEM

Getting Started
2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sucient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products
around this product. (ex. Electrical swatter) This
product may malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open
the enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
1 Getting Started

Getting Started
3
Getting Started
1
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the
point where the cord exits the appliance.
The Power Plug is the disconnecting device. In
case of an emergency, the Power Plug must remain
readily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a Audio
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC outlet).
If grounding methods are not possible, have a
qualied electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.

Getting Started
4
Getting Started
1
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

Getting Started
5
Getting Started
1
FCC Compliance Statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the equipment
and receiver.
yConnect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
yConsult the dealer or an experienced radio/TV
technician for help.
CAUTION : Any changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
FCC WARNING: This equipment may generate
or use radio frequency energy. changes or
modications to this equipment may cause harmful
interference unless the modications are expressly
approved in the instruction manual. The user could
lose the authority to operate this equipment if an
unauthorized change or modication is made.
FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body. End users must follow the
specic operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any
other antenna or transmitter.
CAUTION: Regulations of the FCC and FAA prohibit
airborne operation of radio-frequency wireless
devices because their signals could interfere with
critical aircraft instruments.
Responsible Party :
LG Electronics USA, Inc. 1000 Sylvan Avenue
Englewood Clis, NJ 07632
TEL. : [phone]

Table of Contents
6
Table of Contents
1 Getting Started
2 Safety Information
8 Unique Features
8 Accessories
9 Playable file Requirement
9 – Music file requirement
9 – Compatible USB Devices
9 – USB device requirement
10 Remote control
12 Top panel
14 Front panel
14 Rear panel
2 Connecting
15 How to Affix the Ferrite Core
15 – Affix the Ferrite Core for speaker
cables
15 Connecting to speakers
15 – Attaching the speaker light cables to
the unit
16 Optional Equipment Connection
16 – AUX IN Connection
17 – AUX OUT Connection
18 – PORT. IN Connection
19 – USB Connection
19 – Antenna Connection
3 Operating
20 Basic Operations
20 – CD/USB Operations
21 – Auto Play
21 – Selecting a folder and
an MP3/WMA file
22 – Deleting an MP3/WMA file
22 Playback Effect
22 – DJ EFFECT
22 – SCRATCH Effect
23 – DJ PRO
23 – AUTO DJ
23 – Adjusting TEMPO
24 – MIX
24 – AUTO SYNC
25 Using BLUETOOTH® wireless technology
25 – Listening to music stored on the
Bluetooth devices
27 – Pairing your unit and Bluetooth device
through NFC Tag
28 Using the Music Flow Bluetooth App
28 – Install “Music Flow Bluetooth” App
onto Your Bluetooth Device
29 – Activate Bluetooth with “Music Flow
Bluetooth” App
30 Radio Operations
30 – Listening to the radio
30 – Improving poor FM reception
30 – Presetting the Radio Stations
30 – Deleting all the saved stations

Table of Contents
7
1
2
3
4
5
31 Sound adjustment
31 – Setting the sound mode
31 – Setting the USER EQ
32 Advanced Operations
32 – Recording to USB
34 – DJ SHARING
34 – JUKE BOX Playback
35 Other Operations
35 – Turn off the sound temporarily
35 – CHILDSAFE Mode
36 – Displaying file information
(ID3 TAG)
36 – DEMO
36 – Using Microphone
36 – Using H/P MODE
36 – LIGHTING (X-FLASH) MODE
37 Setting the Clock
37 – Setting the Clock through “Music
Flow Bluetooth” App
37 – Using your player as an alarm clock
37 – Sleep Timer Setting
37 – Dimmer
38 Auto power down
38 – AUTO POWER On
38 – Auto function change
39 LG Sound Sync
4 Troubleshooting
40 Troubleshooting
40 – General
5 Appendix
42 General specifications
43 Speakers specifications
43 Trademarks and Licenses
44 Maintenance
44 – Notes on Discs
44 – Handling the Unit

Getting Started
8
Getting Started
1
Unique Features
Bluetooth®
Listens to music stored on your Bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Playback effects
Listens to music with various sound and playback
eects.
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to page 28.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Accessories
Please check and identify the supplied accessories.
FM Antenna (1) Batteries (2)
Remote Control (1)

Getting Started
9
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/WMA le compatibility with this unit is limited
as follows.
ySampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yBit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yMaximum les : Data CD : 999 / USB : 2000
yMaximum folders : Data CD : 99 / USB : 200
yFile extensions : “.mp3”/ “.wma”
yCertain MP3/WMA les may not be played
depending on the type or format of the le.
yCD-ROM le format : ISO 9660/ JOLIET
yWe recommend that you use Easy-CD Creator,
which creates an ISO 9660 le system.
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive :
Devices that support USB2.0 or USB1.1.
yThe USB function of this unit does not support
all USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a
computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than
a few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
yThis unit recognizes up to 2000 les.
yExternal HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
ySome USB may not work with this unit.

Getting Started
10
Getting Started
1
Remote control
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two (size AAA) batteries
with 4and 5matched correctly.
• • • • • • • • • • a• • • • • • • • •
1(Power) :Switches the unit ON or OFF.
B(Open/Close) :Opens and closes the disc tray.
PRESETFOLDER W/S:
-Searches for a folder of MP3/WMA les. When
a CD/USB containing MP3/WMA les in several
folders is being played, press PRESETFOLDER
W/Sto select the folder you want to play.
-Chooses a preset number for a radio station.
FUNCTION :Selects the function and input source.
MUTE @: Mutes the sound.
VOL +/- : Adjusts speaker volume.
TUNER MEMORY :
-Stores radio stations.
-Deletes all the saved stations.
USB REC :USB direct recording.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be darkened by
half.)

Getting Started
11
Getting Started
1
• • • • • • • • • • b• • • • • • • • •
REPEAT (MENU) :Listens to your tracks/les
repeatedly or randomly.
TUNING-/+ :Selects the radio stations.
C/V(Skip/Search) :
-Skips Fast backward or Forward.
-Searches for a section within a track/le.
ZENTER :
-Stops playback.
-Cancels DELETE function.
d/M(Play/Pause) :
-Starts or pauses playback.
-Selects STEREO/MONO.
SOUND EFFECT : Chooses sound impressions.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to page 23)
DELETE :
-Deletes MP3/WMA les. (USB only).
-Deletes a song on the JUKE BOX list.
• • • • • • • • • • c• • • • • • • • •
0to 9numerical buttons :Selects numbered tracks,
les, or preset number.
INFO
-Sees informations about your music. An MP3 le
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
-Sees the address of connected Bluetooth device
in Bluetooth mode.
REGION EQ : Chooses region equalizer.
• • • • • • • • • • d• • • • • • • • •
CLOCK : Sets a clock and checks a time.
ALARM : With the ALARM function you can turn
CD, USB play and Tuner reception on at a desired
time.
SET : Conrms the setting.
DJ EFFECT : Selects DJ EFFECT mode. (Refer to
page 22)
JUKE BOX :
-Selects JUKE BOX mode.
-Makes your favorites list.
DJ LEVEL +/- : Adjusts the level of DJ EFFECT
sound.

Getting Started
12
Getting Started
1
a1/!(Power)
DJ SHARING : Shares a song stored in a USB
device using the Music Flow Bluetooth
App.
: You can easily connect to Bluetooth
devices through NFC Tag. (Refer to page
27)
*1 - Display window
FUNCTION : Selects the function and input
source.
Bluetooth : Turns to BLUETOOTH function.
bUSB REC : Records to USB 1 (USB A
port).
*2 - USB A Port (USB 1) / *3 - USB BPort (USB
2)
: You can play or record sound files by
connecting the USB device.
DELETE : Deletes a song on the JUKE BOX
list. / Deletes MP3/WMA files. (USB only).
FOLDER : Searches folders or files.
ENTER : Selects a folder when searching a
file.
*4 - Turn clockwise or counterclockwise to
make Scratch sound or search a file or
folder.
*1
*4 *4
*5
*6
*2 *3
Top panel

Getting Started
13
Getting Started
1
cDJ EFFECT : Press a desired DJ effect button
(FLANGER, PHASER, CHORUS, DELAY)
and rotate EFFECT LEVEL to adjust the
DJ EFFECT level.
A / B TEMPO : Adjusts TEMPO in USB
function.
MASTER EQ : Adjusts BASS, MIDDLE,
TREBLE sound level when setting USER
EQ.
dI: Stops playback or cancels DELETE
function.
T: Starts or pauses playback.
Y/U : Skips Fast backward or Forward.
/ Searches for a section within a track/file.
USER EQ : Controls sound register.
*5 - MASTER VOLUME : Adjusts speaker
volume.
eDJ Pro. : Selects CLUB or FOOTBALL Sound
effect to mix. (Refer to page 23)
DJ Pro. PAD : Press a desired sound pad.
fH/P VOL./SYNC SET : Adjust Headphone
volume. / Sets Delay value in X-BOOM
PLUS mode.
H/P MODE (X-BOOM PLUS) : Press to select
a Headphone monitor mode. / Press and
hold to select X-BOOM PLUS mode.
LIGHTING MODE : Turns on/off the lighting
effects.
JUKE BOX / DEMO : Makes your favorites list.
/Switches on and off JUKE BOX. / Shows
Demo mode.
AUTO SYNC : Synchronizes audio files
*6 - Mix fader : Adjusts the sound volume of
mixing files.
MIX : Mixes audio sound.
LATIN EQ : Chooses locally special equalizer.
BASS BLAST : Selects BASS BLAST or
STANDARD effect directly.
BEJECT : Opens and closes the disc tray.

Getting Started
14
Getting Started
1
Front panel
aDisc tray
bHEAD PHONE
cMIC
dPORT. IN
eMIC VOL.
fHandle
Rear panel
aPower cord
yConnect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of
power supply.
yDo not overload the extension cord with
excessive electrical load.
> Caution
bANTENNA (FM)
cAUX IN 1/2 (L/R)
dAUX OUT (L/R)
eR SPEAKERS connector : Connects Right
speaker’s cables.
fL SPEAKERS connector : Connects Left speaker’s
cables.
gSPEAKER LIGHTING

Connecting
15
Connecting
2
How to Affix the
Ferrite Core
Ferrite core may not be provided depending on
each nation’s regulations.
Affix the Ferrite Core for
speaker cables
You must ax a ferrite core in order to reduce or
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind R SPEAKERS cables, L SPEAKERS cables
and SPEAKER LIGHITNG cables around the
ferrite core once.
3. Close the ferrite core until it clicks.
Connecting to
speakers
Connect the speaker cable plugs to the SPEAKERS
connector. Make sure to connect the speaker’s plug
to the corresponding colored speaker connector
when connecting the plug.
Attaching the speaker light
cables to the unit
To connect the speaker light cable to the unit,
insert the cable to SPEAKER LIGHTING connectors
on the unit.
yMake sure that the jacks and the speakers
are matched correctly.
yMake sure to connect the cables to
connectors tightly on the unit.
> Caution
2 Connecting

Connecting
16
Connecting
2
yDo not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
yWhen you connect the speakers to the unit,
make sure to connect the speaker’s cable
and plug to the corresponding speaker
connector.
yThe speakers must be placed a minimum
of 20 cm from the unit for preventing the
vibration caused by the speakers.
20 cm
20 cm
yCheck the volume level before playing
music to prevent inrm, child, and pregnant
women from being shocked by the sudden
and loud sound from the unit.
yDo not use the unit in a limited space.
It may damage a person’s hearing. It is
recommended to use it in a wide space.
yBe careful to make sure children not to put
their hands or any objects into the opening
speaker duct hole.
yThe speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
yAvoid looking at the speaker lights for a
long time. It may cause damage to eyesight.
> Caution Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device (Camcorder,
TV, Player, etc) to the AUX IN 1/2 (L/R) connector.
If your device has only one output for audio
(mono), connect it to the left audio jack on the unit.
Audio cable
DVD, Blu-ray player etc.
RedWhite

Connecting
17
Connecting
2
AUX OUT Connection
Connect an input of auxiliary device to the AUX
OUT (L/R) connector.
If your device has only one input for audio(mono),
connect it to the left audio jack on the unit.
Audio cable
X-BOOM PLUS
You can connect two units to play music together.
1. Connect AUX OUT connector on a unit to the
AUX IN connector on the other unit using
Audio cable.
2. Press and hold H/P MODE (X-BOOM PLUS) on
the unit connected through AUX OUT.
X-BOOM PLUS is displayed.
3. Rotate H/P VOL./SYNC SET clockwise or
counterclockwise to adjust Delay setting.
4. Press H/P MODE (X-BOOM PLUS) to save the
Delay setting.
yThis function is available in only CD, USB 1,
USB 2, BLUTOOTH or PORTABLE Function.
yThe initial Delay is 0 ms and the Delay
becomes to 30 ms when you press and hold
H/P MODE (X-BOOM PLUS). The connected
device’s Delay may dier. If Audio Sync is
not matched, adjust Delay of X-BOOM PLUS
to synchronize sound.
yIt is available to adjust the Delay from 0
ms to 100 ms. Synchronizing tempo is not
available depending on devices.
yDelay value is saved when the unit turns o.
, Note
Auxiliary device
MP3 player etc.

Connecting
18
Connecting
2
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
Portable cable
Listening to music from your
portable player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector on the unit.
Or
Connect the external device to the AUX IN
connector on the unit.
2. Turn the power on by pressing 1/!.
3. Press FUNCTION to select the AUX 1, AUX 2 or
PORTABLE Function.
4. Turn on the portable player or external device
and start it playing.

Connecting
19
Connecting
2
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
Removing the USB device from the unit :
1. Choose a different function/mode or
press ZENTER on the remote control
or Ion the unit twice in a row.
2. Remove the USB device from the unit.
, Note
Antenna Connection
Connect the supplied FM antenna for listening to
the radio.
Connect the FM wire antenna to the FM antenna
connector.
FM antenna
Be sure to fully extend the FM wire antenna.
, Note

Operating
20
Operating
3
Basic Operations
CD/USB Operations
1. Insert the disc by pressing Bon the remote
control or BEJECT on the unit
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing
FUNCTION.
To Do this
Stop Press ZENTER on the remote
control or Ion the unit.
Playback Press d/Mon the remote control
or Ton the unit.
Pause Press d/Mon the remote control
or Ton the unit during playback.
Searching
for a section
within a track/
le
Press and hold C/Von the
remote control or Y/Uon the
unit during playback and release it
at the point you want to listen to.
Selecting
a track/le
directly
Press 0to 9numerical buttons on
the remote control to go to the
desired le or track directly.
Skipping to
the next/
previous
track/le
-In stop status,
Press C/V on the remote
control or Y/U on the unit to
go to the next/previous track/le.
-During Playback,
By using C/V buttons :
Press Von the remote control or
Uon the unit to go to the next
track/le.
Playing less than 2 seconds, press
Con the remote control or
Yon the unit to go to the
previous track/le.
Playing after 3 seconds, press C
on the remote control or Yon
the unit to go to the beginning of
the track/le.
Playing
repeatedly or
randomly
Press REPEAT(MENU) on the
remote control repeatedly. Refer
to the note for details about the
display change.
yThe display changes in the following order.
USB MP3/WMA CD Audio CD
REPEAT TRK
REPEAT *DIR
REPEAT ALL
RANDOM
OFF
REPEAT TRK
REPEAT DIR
REPEAT ALL
RANDOM
OFF
REPEAT TRK
-
REPEAT ALL
RANDOM
OFF
*DIR : Directory
yWhen you play JUKE BOX list, only REPEAT
TRK and REPEAT ALL are available.
yEven after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yThe next le name is displayed every 30
seconds. (Except RANDOM play, AUTO DJ
RANDOM play, the last le of playlist, etc.)
yIf you leave the disc tray open for 5 minutes,
it will close automatically.
, Note
3 Operating