LG HT358SD User manual

Please read this manual carefully before operating
your set and retain it for future reference.
HT358SD (HT358SD, S34S1-S, S34S1-W)
OWNER’S MANUAL
DVD Home
Theater
System
ENGLISH
www.lg.com
DH3140S-F0_ANGAFLK_ENG_5469.indd 1 2014-06-30  2:14:09

1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sucient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
DH3140S-F0_ANGAFLK_ENG_5469.indd 2 2014-06-30  2:14:10

Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safe way to remove the battery or the battery
from the equipment: Remove the old battery
pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to
human and animal health, the old battery or
the battery put in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste. It is
recommended that you use local, free reimburse
ment system batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
Notes on Copyrights
yThis product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yUnder the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
POWER: This unit operates on a mains supply
of 200-240V~, 50/60Hz.
Wiring: This unit is supplied with a BS 1363
approved main plug. When replacing the fuse,
always use of the same rating approved to BS
1362. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover
contact your dealer. If the type of plug supplied
is not suitable for the mains sockets in your
home, then the plug should be removed and
a suitable type tted. Please refer to the wiring
instructions below:
Warning: A mains plug removed from the
mains lead of this unit must be destroyed. A
mains plug with bared wires is hazardous if
inserted in a mains socket. Do not connect
either wire to the earth pin, marked with the
letter E or with the earth symbol or coloured
green or green and yellow. If any other plug is
tted, use same rating of fuse in the plug.
Important: The wires in this mains lead are
coloured in accordance with the following
codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this
unit may not correspond with the coloured
marking identifying the terminals in your plug,
proceed as follows: The wire which is coloured
blue must be connected to the terminal which
is marked with the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
DH3140S-F0_ANGAFLK_ENG_5469.indd 3 2014-06-30  2:14:10

Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information
6 Introduction
6 Accessories
6 – Playable Discs
6 – About the & Symbol Display
6 – Symbol Used in this Manual
6 – Regional Codes
7 – Playable file Requirement
9 Front panel
9 Rear panel
10 Remote control
2 Connecting
11 Connecting the speakers
11 – Attaching the speakers to the unit
11 – Positioning the System
12 Connections to Your TV
12 – Video Connection
12 Optional Equipment Connection
12 – AUX IN Connection
13 – USB Connection
13 – Antenna Connection
3 System Setting
14 Adjust the Setup settings
14 – OSD Initial language settings -
Optional
14 – To display and exit the Setup Menu
14 – LANGUAGE
15 – DISPLAY
15 – AUDIO
16 – LOCK (Parental Control)
17 – OTHERS.
DH3140S-F0_ANGAFLK_ENG_5469.indd 4 2014-06-30  2:14:10

Table of Contents 5
1
2
3
4
5
6
4 Operating
18 Basic Operations
19 Other Operations
19 – Displaying Disc Information on-screen
19 – To display the DVD Menu
19 – To display the DVD Title
19 – Selecting a subtitle language
19 – 1.5 times speed playback
19 – Resume playback
20 – Starting play from selected time
20 – Last Scene Memory
20 – Power Resume - Optional
20 – Changing the character set to display
DivX® subtitle correctly
20 – Programmed Playback
21 – Viewing a PHOTO file
21 – Viewing photo files as a slide show
21 – Listening to music during slide show
21 – Sleep Timer Setting
21 – Dimmer
21 – Turn off the sound temporarily
21 – Auto Power Down
22 – Screen Saver
22 – System Select - Optional
22 – Displaying file information
(ID3 TAG )
22 Radio Operations
22 – Listening to the Radio
22 – Presetting the Radio Stations
22 – Deleting all the saved stations
22 – Improving poor FM reception
23 Sound adjustment
23 – Setting the surround mode
5 Troubleshooting
24 Troubleshooting
6 Appendix
25 Maintenance
25 – Handling the Unit
25 – Notes on Discs
26 Area Code List
27 Language Code List
28 Trademarks and Licenses
29 Specifications
DH3140S-F0_ANGAFLK_ENG_5469.indd 5 2014-06-30  2:14:10

Getting Started6
Getting Started
1
Introduction
Accessories
Please check and identify the supplied accessories.
Q
Q
Q
Remote Control (1)/
Batteries (2)
Video Cable (1)
Playable Discs
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, DivX, MP3, WMA and/or
JPEG les. Some DVD±RW/DVD±R or CD-RW/
CD-R cannot be played on this unit due to the
recording quality or physical condition of the disc,
or the characteristics of the recording device and
authoring software.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm / 12 cm disc)
Video mode and nalized only.
DVD-RW (8 cm / 12 cm disc)
Video mode and nalized only.
DVD+R: Video mode only.
Supports the double layer disc also.
DVD+RW (8 cm / 12 cm disc)
Video mode and nalized only.
Audio CD: Music CDs or CD-R/CD-
RW in music CD format that can be
purchased.
About the & Symbol Display
“ & ” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that disc.
Symbol Used in this Manual
rDVD-Video, DVD±R/RW in Video
mode and nalized
tAudio CDs
yVideo les contained in the
USB/Disc
uAudio les contained in the
USB/Disc
iPhoto les
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.
yMost DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code; or
the disc cannot play.
yIf you try to play a DVD with a dierent regional
code from your unit, the message“Check
Regional Code” appears on the TV screen.
DH3140S-F0_ANGAFLK_ENG_5469.indd 6 2014-06-30  2:14:11

Getting Started 7
Getting Started
1
Playable file Requirement
Music file requirement
MP3/ WMA le compatibility with this unit is limited
as follows :
ySampling frequency : within 8 k to
48 kHz (MP3), within 22.05 k to 48 kHz (WMA)
yBit rate : within 8 k to 320 kbps (MP3), 32 k to 192
kbps (WMA)
ySupport Version : v2, v7, v8, v9
yMaximum les : Under 650
yFile extensions : “.mp3”/ “.wma”
yCD-ROM le format : ISO 9660/ JOLIET
yWe recommend that you use Easy-CD Creator,
which creates an ISO 9660 le system.
yYou have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File
System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system
for Windows Vista)
The DTS is not supported. In case of DTS audio
format, audio is not output.
Photo file requirement
JPEG disc compatibility with this unit is limited as
follows :
yMax pixel in width : 2760 x 2048 pixel
yMaximum les : Under 650
ySome discs may not operate due to a dierent
recording format or the condition of disc.
yFile extensions: “.jpg”
yCD-ROM le format : ISO 9660/ JOLIET
DivX file requirement
DivX le compatibility with this unit is limited as
follows :
yAvailable resolution:
within 720 x 576 (W x H) pixels.
yThe le name of the DivX subtitle should be
entered within 45 characters.
yPlayable video le bit rate : 7 Mbps and under.
yIf there is impossible code to express in the
DivX le, it may be displayed as“ _ “ mark on the
display.
yFrame rate : less than 30 fps.
yIf the video and audio structure of recorded
les is not interleaved, either video or audio is
outputted.
yPlayable DivX le : “.avi”, “.mpg”, “.mpeg”, “.divx”
yPlayable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
yPlayable Codec format :
“DIVX 3.11”, “DIVX4”, “DIVX5”. “DIVX6”
“MP4V3”, “3IVX”
yPlayable Audio format : “AC3”, “PCM”, “MP3”, “WMA”.
ySampling frequency : within 8 k to
48 kHz (MP3), within 22.05 k to 48 kHz (WMA)
yBit rate : within 8 k to 320 kbps (MP3), 32 k to 192
kbps (WMA)
yFor Discs formatted in Live le system, you can
not it on this unit.
yIf the name of movie le is dierent from that of
the subtitle le, during playback of a DivX le,
subtitle may not be display.
yIf you play a DivX le dierent from the DivXspec,
it may not operate normally.
DH3140S-F0_ANGAFLK_ENG_5469.indd 7 2014-06-30  2:14:11

Getting Started8
Getting Started
1
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive : Devices that support USB2.0 or
USB1.1.
yThe USB function of this unit does not support
some USB devices.
USB device requirement
yDevices which require additional program
installation connected to a computer, are not
supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than
a few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported. (Only
FAT(16/32) le system is supported.)
yThis unit is not supported when the total
number of les is 1000 or more.
yExternal HDD, Card readers, Locked devices,
or hard type USB devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
ySome USB may not work with this unit.
DH3140S-F0_ANGAFLK_ENG_5469.indd 8 2014-06-30  2:14:11

Getting Started 9
Getting Started
1
Front panel
-
V
O
L
U
M
E
+
aDVD/CD Disc Drawer
bDisplay window
c1/!(Power)
d R(Open/Close)
T(Play/Pause)
I(Stop)
eY/U (Skip/Search)
You can skip and search chapter/ track/ le by
pressing and holding Y/U.
TUNING (-/+)
Tunes in the desired radio station.
FUN (FUNCTION)
Selects the function or input source.
fUSB port
gVOLUME (-/+)
Rear panel
aPower cord
b
Speaker connector
c
AUX (L/ R) INPUT connector
d
MONITOR (VIDEO OUT) connector
Connect to a TV with video inputs.
eFM ANTENNA
DH3140S-F0_ANGAFLK_ENG_5469.indd 9 2014-06-30  2:14:12

Getting Started10
Getting Started
1
Remote control
Battery Installation
Remove the battery cover on the
rear of the Remote Control, and
insert one (size AAA) battery with
4and 5matched correctly.
• • • • • • a • • • • •
1(POWER) : Switches the unit
ON or OFF.
B(OPEN/CLOSE) : Opens and
closes the disc Drawer.
FUNCTION : Selects the function
and input source.
SLEEP : Sets the system to turn o
automatically at a specied time.
(Dimmer : The display window will
be darken by half.)
TITLE : If the current DVD title has
a menu, the title menu appears
on the screen. Otherwise, the disc
menu may not appear.
SETUP : Accesses or removes
setup menu.
• • • • • • b • • • • •
DISPLAY : Accesses On-Screen
Display.
MENU : Accesses the menu on a
DVD disc.
PRESET (w/s) : Selects
programme of Radio.
TUNING (-/+) : Tunes in the
desired radio station.
w/s/a/d (up/ down/ left/
right):Used to navigate on-screen
displays.
ENTER (b) : Acknowledges menu
selection.
BACK (x) : Moves backwards in
the menu or exits the setup menu.
?: This button is not available.
• • • • • • c • • • • •
Z(STOP) : Stops playback.
d(PLAY) MONO/STEREO : Starts
playback. Selects Mono/ Stereo.
M(PAUSE) : Pauses playback.
C/V (SKIP) : Goes to next or
previous chapter/ track/ le.
c/v (SCAN) : Searches
backward or forward.
• • • • • • d • • • • •
REPEAT: Selects a play mode.
(Random, repeat)
VOL (Volume) (+/-) : Adjusts
speaker volume.
SOUND EFFECT (9) : Chooses
sound impressions.
MUTE ( ) : Mutes the sound.
CLEAR : Removes a track number
on the Program List.
S-TITLE : During playback, press
S-TITLE repeatedly to select a
desired subtitle language .
0 to 9 numerical buttons :
Selects numbered options in a
menu.
PROG./MEMO. : Accesses or
removes Program menu.
• • • • • • e • • • • •
TV Control buttons : Controls the
TV. (LG TV only)
-You can control the sound
level, input source, and power
switching of LG TVs as well.
Hold POWER (TV) and press
PR/CH (+/–) button repeatedly
until the TV turns on or o.
?: This button is not available.
DH3140S-F0_ANGAFLK_ENG_5469.indd 10 2014-06-30  2:14:13

2 Connecting
Connecting 11
Connecting
2
Connecting the
speakers
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black wire to the terminals marked -
(minus) and the other end to the terminals marked
+ (plus).
Speaker connection
Connect a woofer cord to the player.
When connecting a woofer cord to the player,
insert the connector until it clicks.
yBe careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
yThe speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
> Caution
Positioning the System
The following illustration shows an example of
positioning the system.
Note that the illustrations in these instructions dier
from the actual unit for explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position ( ).
Speaker Positioning
Front left speaker (L)/ Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as ush with the screen
surface as possible.
Center speaker: Place the center speaker above
or below the monitor or screen.
Surround left speaker (L)/ Surround right
speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
Subwoofer: The position of the subwoofer is
not so critical, because low bass sounds are not
highly directional. But it is better to place the
subwoofer near the front speakers. Turn it slightly
toward the center of the room to reduce the wall
reections.
Unit
DH3140S-F0_ANGAFLK_ENG_5469.indd 11 2014-06-30  2:14:14

Connecting12
Connecting
2
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
yDepending on your TV and other
equipment you wish to connect, there are
various ways you could connect the player.
Use only one of the connections described
in this manual.
yPlease refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
, Note
yMake sure the unit is connected directly
to the TV. Tune the TV to the correct video
input channel
yDo not connect your player via your VCR.
The image could be distorted by the copy
protection system.
> Caution
Video Connection
Connect the MONITOR jack on the unit to the video
in jack on the TV using a video cable.
You can hear the sound through the system’s
speakers.
Optional Equipment
Connection
AUX IN Connection
Connect an Output of auxiliary device to the AUX
(L/R) INPUT Connector.
If your TV has only one output for audio (mono),
connect it to the left (white) audio jack on the unit.
White
Red
Yellow
DH3140S-F0_ANGAFLK_ENG_5469.indd 12 2014-06-30  2:14:15

Connecting 13
Connecting
2
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1. Choose a different function mode or
press Ztwice in a row.
2. Remove the USB device from the unit.
, Note
Antenna Connection
Be sure to fully extend the FM wire antenna.
DH3140S-F0_ANGAFLK_ENG_5469.indd 13 2014-06-30  2:14:15

3 System Setting
System Setting14
System Setting
3
Adjust the Setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and
the Setup menu, among other things. For details on
each Setup menu item, see pages 14 to 17.
OSD Initial language settings
- Optional
During the rst use of this unit, the initial language
setup menu appears on your TV screen. You must
complete initial language selection before using
the unit. English will be selected as the initial
language.
1. Press
1(POWER) to turn the unit on. The
language setup menu will appear on the screen.
2. Use w/s/a/d to select a language then
press ENTER.
The confirm menu will appear.
3. Use
a/d to select the [Enter] then press
ENTER to finish the language setup.
To display and exit the Setup
Menu
1. Select the DVD/CD or USB function by pressing
FUNCTION.
2. Press SETUP.
Displays the [Setup] Menu.
3. Press SETUP or BACK to exit in the [Setup]
Menu.
About help menu for Setup
Menu Buttons Operation
w/s
Move w/s Moving to another
menu.
a
Prev. aMoving to previous
level.
d
Select dMoving to next level
or selecting menu.
x
BACK
To exit the [Setup]
menu or [ 5.1 Speaker
Setup].
b
ENTER To conrm menu.
LANGUAGE
Menu Language
Select a language for the Setup menu and then on
screen display.
Disc Audio / Disc Subtitle / Disc
Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
DH3140S-F0_ANGAFLK_ENG_5469.indd 14 2014-06-30  2:14:15

System Setting 15
System Setting
3
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
To select another language, press numeric
buttons and then ENTER to enter the
corresponding 4-digit number according to
the language code list on the page 27. If you
enter the wrong language code, press CLEAR.
[O (for Disc Subtitle)]
Turn o Subtitle.
DISPLAY
TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the
upper and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts o the portions that do
not t. (If the disc/le is not compatible with
Pan Scan, the picture is displayed at Letterbox
ratio.)
AUDIO
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this eect.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is eective for multi-channel karaoke
DVDs only.
5.1 Speaker Setup
Make the following settings for the built-in 5.1
channel surrounds decoder.
1. Press SETUP.
2. Use
w/s to select AUDIO menu and then
press d.
3. Use w/s to select [5.1 Speaker setup] menu
and then press d.
4. Press ENTER
The [5.1 Speaker setup] appears.
5. Use
a/d to select the desired speaker.
6. Adjust options using w/s/a/d buttons.
7. Press BACK to confirm your selection. Return to
the previous menu.
[Speaker]
Select a speaker that you want to adjust.
Certain speaker settings are prohibited by
the Dolby Digital licensing agreement.
, Note
[Size]
Since the speaker settings are xed, you cannot
change the settings.
DH3140S-F0_ANGAFLK_ENG_5469.indd 15 2014-06-30  2:14:15

System Setting16
System Setting
3
[Volume]
Press a/d to adjust the output level of the
selected speaker.
[Distance]
Adjust the distance between each speaker and
the listening position.
[Test]
Press a/d to test the signals of each speaker.
Adjust the volume to match the volume of test
signals memorized in the system.
LOCK (Parental Control)
Initial Setting of the Area Code:
When you use this unit for the rst time, you have
to set the Area Code.
1. Select the [Lock] menu and then press d.
2. Pressd.
To access the [Lock] options, you must input the
password you have created. Input a password
and press ENTER. Enter it again and press
ENTER to verify. If you make a mistake before
pressing ENTER, press CLEAR.
3. Select the first character using w/s buttons.
4. Press ENTER and select the second character
using w/s buttons.
5. Press ENTER to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
d.
2. Input a password and press ENTER.
3. Select a rating from 1 to 8 using the w/s
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not
active and the disc plays in full.
4. Press ENTER to confirm your rating selection.
Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press d.
2. Input a password and press ENTER.
To change the password, press ENTER when
the [Change] option is highlighted. Input a
password and press ENTER. Enter it again and
press ENTER to verify.
3. Press SETUP to exit the menu.
If you forget your password, you can clear
it using the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and
press ENTER. The password is cleared.
, Note
DH3140S-F0_ANGAFLK_ENG_5469.indd 16 2014-06-30  2:14:15

System Setting 17
System Setting
3
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 26.
1. Select [Area Code] on the [Lock] menu then
press d.
2. Input a password and press ENTER.
3. Select the first character using w/s buttons.
4. Press ENTER and select the second character
using w/s buttons.
5. Press ENTER to confirm your Area code
selection.
OTHERS
DivX(R) VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an ocial DivX Certied®
device that has passed rigorous testing to verify
that it plays DivX video. Visit divx.com for more
information and software tools to convert your les
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certied® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your unit.
[Deregister]
Deactivate your unit and display the deactivation
code.
All the downloaded videos from DivX VOD can
only be played back on this unit.
, Note
DH3140S-F0_ANGAFLK_ENG_5469.indd 17 2014-06-30  2:14:16

4 Operating
Operating18
Operating
4
Basic Operations
1. Insert the disc by pressing Bor connect the
USB device to the USB port.
2. Select the DVD/ CD or USB function by pressing
FUNCTION.
3. Select a file (or track/ title) you want to play by
pressing w/s/a/d.
When playing a disc or USB Flash Drive
containing with DivX, MP3/ WMA and JPEG
les together, you can select menu of les
which you would like to play by pressing
MENU. If “This le has non-supported type on
the unit” pops up, select an appropriate le by
pressing MENU.
, Note
To Do this
Stop Press ZSTOP.
Playback Press dPL AY.
Pause Press MPAUSE.
Frame-by-Frame
playback
Press MPAUSE repeatedly to
play title Frame-by-Frame.
Skipping to the
next/previous
chapter/track/
le
During playback, press C/
VSKIP to go to the next
chapter/track or to return to
the beginning of the current
chapter/track.
Press Ctwice briey to step
back to the previous chapter/
track.
Locating a
point quickly by
playing a le in
fast forward or
fast reverse
During playback, press c/
vSCAN repeatedly to
select the required scan
speed.
To return to normal speed,
press dPLAY.
Playing
repeatedly
Press REPEAT/RANDOM
repeatedly, and the current
title, chapter or track will be
played back repeatedly or
randomly.
- Random play mode : only
music les.
Slowing down
the playing
speed
In the pause mode, press
c/v SCAN to select the
required speed. (The reverse
playback is not supported on
DivX les.)
DH3140S-F0_ANGAFLK_ENG_5469.indd 18 2014-06-30  2:14:16

Operating 19
Operating
4
Other Operations
Displaying Disc Information
on-screen
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback
information.
The displayed items differ depending on the
disc type or playing status.
2. You can select an item by pressing w/s and
change or select the setting by pressing a/d.
Title – Current title number/ total number of titles.
Chapter – Current chapter number/total number of
chapters.
Time – Elapsed playing time. When you put cursor
in “Time”menu, you can check total playing
time. on botton menu.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Sound – Selected sound mode.
If any button is not pressed for a few seconds,
the onscreen display disappears.
, Note
To display the DVD Menu
r
When you play a DVD which contains several
menus, you can select the menu you want using
the menu.
1. Press MENU.
The disc’s menu appears.
2. Select the menu by using w/s/a/d.
3. Press
dto confirm.
To display the DVD Title
r
When you play a DVD which contains several titles,
you can select the title you want using the menu.
1. Press TITLE.
The disc’s title appears.
2. Select the menu by pressing
w/s/a/d.
3. Press
dto confirm.
Selecting a subtitle language
ry
During playback, press S-TITLE repeatedly to select
a desired subtitle language.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press dto play at 1.5 times
speed. “dX1.5”appears on the screen.
2. Press
dagain to exit.
Resume playback
ryut
The unit records the point where you pressed the
Zdepending on the disc.
If “MZ (Resume Stop)” appears on the screen
briey, press dto resume playback (from the scene
point).
If you press Ztwice or unload the disc,
“Z”(Complete Stop) appears on the screen. The
unit will clear the stopped point.
yThe resume point may be cleared when a
button is pressed (for example; 1POWER,
B, etc).
yThis function may not work on some disc or
title/track.
, Note
DH3140S-F0_ANGAFLK_ENG_5469.indd 19 2014-06-30  2:14:16

Operating20
Operating
4
Starting play from selected
time
ry
To start playing at any chosen time on the le or
title.
1. Press DISPLAY during playback.
2. Press
w/s to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
4. Press ENTER to confirm. Playback starts from
the selected time.
Last Scene Memory
r
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or
switch o (Stand-by mode) the unit. If you load a
disc that has the scene memorized, the scene is
automatically recalled.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save
current playback status.
Changing the character set to
display DivX® subtitle correctly
y
If the subtitle does not display properly during
playback press and hold S-TITLE for about 3
seconds then press a/d or S-TITLE to select
another language code until the subtitle is
displayed properly and then press ENTER.
Programmed Playback
tu
The program function enables you to store your
favourite les from any disc or USB device.
A program can contain 30 tracks/ les.
1. Select the DVD/CD or USB function by pressing
FUNCTION.
2. To add a music(s) on the program list, press
PROG./MEMO. to enter the program edit mode
({ icon appears on the menu).
3. Select a desired music on the [List] by using the
w/s then press ENTER to add the music to
the program list.
4. Select music from the program list then press
ENTER to start programmed playback.
5. Press PROG./MEMO. to exit the program edit
mode ({ icon disappears on the menu).
Erasing a file from Program List
1. Press PROG./MEMO. to enter the program edit
mode ({icon appears on the menu).
2. Use
w/s to select the track that you wish to
erase from the Program list.
3. Press CLEAR.
Erasing the Complete Program List
Use w/s/a/d to select [Clear All] then press
ENTER.
The programs are also cleared when the disc or
USB device is removed, the unit is switched to
power o or the function is switched to others.
, Note
DH3140S-F0_ANGAFLK_ENG_5469.indd 20 2014-06-30  2:14:16