LG DS80QY User manual

OWNER’S MANUAL
Wi-Fi
SOUND BAR
Please read this manual carefully before operating your set and retain it for future
reference.
Model
DS80QY (DS80QY, SPQ8-W)
2201_Rev01
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per LG DS80QY o cerca il tuo
prodotto tra le migliori offerte di Soundbar e Home Theatre

2
Sound Bar Quick Guide
Installing and using the Product
a Connect the sound bar to your TV via an optical cable or an HDMI
cable.
HDMI OUT
OPTICAL
IN
HDMI IN
HDMI IN
(ARC)
HDMI IN OPTICAL
OUT
HDMI dTV
(eARC / ARC)
a
b
DE
a
C
C
c
c
c
B
A
A Sound bar
B Remote Control Receiver / Status Display
C Rear Speakers / Wireless Receiver (Sold separately, SPQ8-S)
D Wireless Subwoofer - Install it close to the sound bar.
E External Device - (Blu-ray player, game console, etc.)
Soundbar Quick Guide

3
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an
HDMI cable.
c If you purchased the rear speakers and wireless receiver separately, connect the rear speakers to the wireless
receiver via a speaker cable. When connecting the rear speakers to the wireless receiver, connect the black
striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of
each speaker.
d Connect to power in the following order: wireless subwoofer [wireless receiver [sound bar. Then, turn on
the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless
subwoofer and the wireless receiver will light up green. ([See “Connecting the Product” on page 6.)
e Using the product with your TV ([See “Connecting with an
Optical Cable”, “Connecting with an HDMI Cable”, “Connecting
via Bluetooth” on page 32, 34, 36.)
A Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
B On your TV's settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, “OPT”, “ ARC”, or “E-ARC” will appear on the status display
with a sound.
f Connecting the product to your smartphone via Wi-Fi ([See
“Connecting with a Smartphone via Wi-Fi” on page 17.)
A Connect your smartphone to Wi-Fi.
B Install the LG Sound Bar app on Google Play or the App Store.
C Run the LG Sound Bar app and follow the instructions.
D The product will connect to your smartphone and you can control the product with LG Sound Bar app.
g Connecting the product to your smartphone via Bluetooth ([
See “Connecting via Bluetooth” on page 40.)
A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. (
Off > On)
B Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.
C Find and tap “LG_Speaker_DS80QY_XXXX” or the name you registered on the Google Home app.
D When the product is connected to your smartphone via Bluetooth, you can see the status display change
from “PAIRED” [“Connected Bluetooth device name” [“BT”.

4
Manually connecting the sound bar to the wireless subwoofer or wireless
receiver ([See “Connecting the wireless subwoofer manually”, “Manual
connection” on page 8, 10.)
If you see a red LED on the back of the wireless subwoofer or on the front of the wireless receiver, it means
that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.
A Press the Power button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless subwoofer or wireless receiver.
Check if each LED blinks green.
- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the
back of the subwoofer again.
C Press the Power button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless
subwoofer or on the front of the wireless receiver light up green.

5
Table of Contents
Sound Bar Quick Guide
2Installing and using the Product
Installation
6Connecting the Product
17 Connecting with a Smartphone via Wi-Fi
21 Resetting the Product
Exploring the Product
22 Front
24 Back
25 Exploring Remote Control
Connecting to the TV
32 Connecting with an Optical Cable
34 Connecting with an HDMI Cable
36 Connecting via Bluetooth
Connecting to an External Device
37 Connecting with an HDMI Cable
39 Connecting with an Optical Cable
Using the Product as an Audio
System
40 Connecting via Bluetooth
43 Connecting to a USB Storage Device
45 Using the LG Sound Bar app
46 Compatible with Google Assistant
47 Works with Apple AirPlay
48 Spotify Connect
49 Works with Alexa
Mounting the Product to a Wall
51 Checking before mounting to a wall
53 Mounting the Product to a Wall
Safety Precautions
55 Safety and Regulatory
Before Reporting Product
Malfunction
58 Troubleshooting
Appendix
62 Specications
64 Registered Trademarks and Licenses
66 What You Need to Know about Network
Services
66 Open Source Software Notice Information
67 Handling the Product

6
Installation
Connecting the Product
You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.
Connecting the wireless subwoofer automatically
After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect
the sound bar to the subwoofer in the following order.
a Plug the power cable into the wireless subwoofer.
b Plug the power cable connected to the wireless subwoofer into an outlet.
c Plug the power cable into the sound bar.
d Plug the power cable connected to the sound bar into an outlet.
e When the connection is automatically established, you will see the LED on the back of the wireless subwoofer
light up green.
Installation

7
Checking the connection with the LED on the back of the wireless
subwoofer
You can check the connection status by looking at the LED on the back of the wireless subwoofer.
LED Colour Status
Blinking green Connecting in progress
Green Connected successfully
Red Bad connection, or the subwoofer is in standby
Off Power cable not connected

8
Connecting the wireless subwoofer manually
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the
subwoofer. If this is the case, connect them in the following order.
a Press the Power button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless subwoofer. Check if the LED on the back of the
subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on
the back of the subwoofer again.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the back of the wireless subwoofer light up
green.
Note
• Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound
bar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless
subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,
microwave ovens, etc.).

9
Connecting the rear speakers to the wireless receiver (SPQ8-S, sold
separately)
Automatic connection
After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the
sound bar to the wireless receiver in the following order.
a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the
black striped cable to the negative terminal and the other cable to the positive terminal.
b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.
Receiver Terminal Colour Speaker Position
Blue LLeft rear
Grey RRight rear
c Plug the power cable into the wireless receiver.
d Plug the power cable connected to the wireless receiver into an outlet.
e Press the Power button on the sound bar to turn it on.
f When the connection is automatically established, you will see the LED on the front of the wireless receiver
light up green.
Note
• Please only use the speakers provided with the product. Using other speakers may cause malfunction.
• Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive
terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound
or produce no bass.

10
Checking connection status with the LED colour
You can check the connection status with the LED on the front of the wireless receiver.
LED Colour Status
Blinking green Connecting In progress
Green Connected successfully
Red Bad connection, or the receiver is in standby
Off Power cable not connected
Manual connection
If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the
receiver. If this is the case, connect them in the following order.
a Press the Power button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless
receiver is blinking green.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the front of the wireless receiver light up
green.
Note
• Keep the rear speakers at least 30 cm away from the TV or monitor.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless
receiver and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,
microwave ovens, etc.).

11
Attaching the ferrite core (optional)
A ferrite core may not be provided depending on national standards.
Attaching the ferrite core to the speaker cables
Attach the ferrite core to the cables to reduce radio noise.
a Pull Part [a] to open the ferrite core.
b Wind the wireless receiver's speaker cables twice around the ferrite core. A distance of about 18 cm is
required between the wireless receiver and the ferrite core.
c Close the ferrite core until you hear a click.

12
Setting up surround sound
The surround sound function allows you to hear immersive 3D sound produced by multiple audio channels from
the speakers, regardless of the channels in the originally recorded content.
For example, if you listen to music recorded in 2.0 channels with standard sound effects while the wireless rear
speakers are connected, you can hear the following difference.
When the surround sound is off
When the surround sound is on
Note
• Speaker positions are as follows.
A Front speakers
B Centre speaker
C Top speakers
D Top centre speaker
E Subwoofer
F Rear speakers

13
Turning surround sound on/off
a Press Settings button. The product enters the setting mode and you can see “OFF-AUTO POWER” or
“ON-AUTO POWER”.
OFF-AUTO POWER
b While the “OFF-AUTO POWER” or “ON-AUTO POWER” is scrolling in the status display, press Left/
Right button to select the surround sound setting. You can see the status of the surround sound, “OFF-
SURROUND” or “ON-SURROUND”.
OFF-AUTO POWER
OFF-SURROUND
OFF-NIGHT TIME
OFF-TV REMOTE
c While the “OFF-SURROUND” or “ON-SURROUND” is scrolling in the status display, press Up/Down
button to turn on or off the surround sound.
OFF-SURROUND ON-SURROUND

14
Speaker sound based on input channels
Sound Effects Input
Output
Rear speakers not
connected
Rear speakers
connected
AI SOUND PRO
Sound customised
witharticial
intelligence
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels
STANDARD
You can enjoy
optimised sound.
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels

15
Sound Effects Input
Output
Rear speakers not
connected
Rear speakers
connected
MUSIC
Sound enriched
with MERIDIAN
technology
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels
CINEMA
Cinematic 3D
sound
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels
CLEAR VOICE
Voice sound clear,
improving the
quality of voice
sound
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels

16
Sound Effects Input
Output
Rear speakers not
connected
Rear speakers
connected
SPORTS
Realistic sound like
in a stadium
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels
GAME
Optimised sound
for game
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels
BASS BLAST
(BASS BLAST+)
Sound with
reinforced bass
2.0 channels
5.1 channels
7.1 channels or more
7.1.4 channels

17
Connecting with a Smartphone via Wi-Fi
LG Sound Bar app allows you to connect the product to the network and to control the product.
Please check the following rst.
• Do you have a wireless router?
- To connect your smartphone and the product via Wi-Fi, you must have a wireless router.
- Make sure that they are both connected to the same Wi-Fi network.
• Does your smartphone have Bluetooth enabled?
- Enable Bluetooth on your smartphone.
- If Bluetooth is enabled, you can easily connect to Wi-Fi. If Bluetooth is disabled, the product may
not be registered on the LG Sound Bar app.
• The LG Sound Bar app is available in the versions listed below.
- Android™ OS: Version 5.0 or higher
- iOS OS: Version 10 or higher
- Minimum supported versions for each OS may change later.

18
Installing the app
Install the LG Sound Bar app on your smartphone. To install the LG Sound Bar app, you can scan the QR code
with a QR code scan app or download on Google Play or the App Store.
Downloading with a QR code
a Scan the QR code below with a QR code scan app.
b You will be directed to a page where you can download the LG Sound Bar app. Tap the app to install it.
(Android Phone OS)
(iPhone OS)
Downloading on Google Play or App Store
Go to the Google Play or the App Store on your smartphone and search for the LG Sound Bar app to install it.
(Android™ Phone)
(iPhone)

19
Note
• Settings menu items may vary depending on the smartphone manufacturer and OS.
• Google, Android, Google Play, Google Home and Chromecast built-in are trademarks of Google LLC.
Connecting with a Smartphone via LG Sound Bar app
You must connect the product to the smartphone via Wi-Fi on the LG Sound Bar app to use network services.
The app installation method differs depending on the smartphone.
a Find and tap the LG Sound Bar app installed on your smartphone.
b Follow the instructions on the LG Sound Bar app. You will need to agree to the terms of service, Chromecast
guide screen, and location permission settings. Turn on Wi-Fi and Bluetooth.
c Select the product to connect. This product will be indicated as “LG_Speaker_DS80QY_XXXX”.
LG_Speaker_DS80QY_XXXX
LG_Speaker_DS80QY_XXXX
d Select a Wi-Fi network and enter the password.
Wi-Fi Network
e After completing product connection on the LG Sound Bar app, you will see “CONNECTED” appear on the
status display on the product.

20
Note
• You can register the product on Google Home app. For more information, please visit http://www.google.com/
cast/setup/.
• You can create a speaker group with Google Home app and add up to 4 devices as a speaker group. Adding too
many devices may become inconvenient when listening to music.
• If you want to check or change the registered home’s nickname or the product name, connect to the Google
Home app and tap the Device Settings button.
• YoucannotcongureorcontroltheproductwiththeLG ThinQ app.