Yes No / Do not know
SC-NE3SC-NE5
NoYes
Start wireless network settings
Preparation
1 Place SC-NE5/SC-NE3 close to the wireless network router.
2 Turn this system on.
3 Follow the chart below to choose the network setting method.
≥If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced
setting, refer to [SC-NE5] “Method 4” or [SC-NE3] “Method 3” in the Owner’s Manual.
The following explanations are based on an iPhone.
Lightning connector compatible iPod
touch/iPhone:
iPod touch/iPhone/iPad with
iOS 5.0 or later:
1Disconnect any devices
connected to the CD unit.
2Connect the iPhone to your
home wireless network.
3Connect the iPhone to the CD
unit.
Choose one of the following
connections.
4Unlock your iPhone and then
press and hold
[sNETWORK SETUP] on the
CD unit for more than 3
seconds.
5A message will pop-up on the
iPhone. Allow the iPhone to
share the wireless network
settings.
6The settings are completed
when “SUCCESS” is displayed
and the indicator on the
speaker unit lights in blue.
7Press [OK] on the remote
control to exit.
You can make the wireless
network settings with the app,
“Panasonic Stereo System
Network Setup” (for free).
If you’re using an Android device,
download the app at the Google
PlayTM Store. If you’re using an
iPod touch/iPhone/iPad,
download it at the App Store.
Preparation
≥Connect your smartphone to
your home wireless network.
≥Check the password for your
home wireless network.
∫Note for the iOS version
After step 2
1Enter the password for the home
wireless network to which the iOS
device is connected.
2When a message instructing you
to connect the iOS device to this
system is displayed, press the
home button to close the app.
3On the Wi-Fi network selection
screen in “Settings”, select
“00 Setup _ _ _ _ _ _”.
4When a message indicating the
completion of the connection to
this system is displayed, restart
the app.
5When a message indicating the
completion of the Wi-Fi setup of
this system is displayed, close the
app, and then check the operation
of AirPlay, etc.
1Press [SETUP] on the remote
control repeatedly to select
“NET SETUP” and then press
[OK].
2Start “Panasonic Stereo
System Network Setup” on
your smartphone and follow
the indications.
Using AirPlay
The following explanations are based on an
iPhone.
Preparation
≥Turn this system on.
If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA
(7262)
Mon-Fri: 9 am – 9 pm (EST) Lunes-Viernes
Sat-Sun: 10 am – 7pm (EST) Sabado-Domingo
www.panasonic.com/help
Canada:
Telephone: 1-800-561-5505
1Connect the iPhone to your home wireless network.
2Select “Panasonic NE5 (NE3) _ _ _ _ _ _” from the AirPlay icon and start play.
