Lifensoul IE101 User manual

60X105mm,80g普通纸正反双面单色印刷
60mm
105mm
60mm
240mm
60mm 60mm
展开尺寸：240x105mm 折后尺寸做四折页,
IE101 User manual
Waterproof Bluetooth Shower
Speaker
Product Overview
Trouble shooting
Thank you for choosing our product.We
hope you will enjoy it very much.
Safety Instructions
Read this manual carefully before putting
the appliance into operation and keep this
manual for future reference.
-Keep the device away from heat, direct
sunlight and sharp edges.
- Keep the device away from open flames.
-Do not insert any metal object into the
device. Risk of short circuit!
-To avoid a static charge,do not use the
device in an extremely dry climate.
- Do not repair the unit yourself.Contact an
authorized specialist if needed
Technical
* Waterproof Bluetooth speaker
* Comply with Bluetooth V2.1
* RF range: 10M
* Frequency response: 100HZ-20KHZ
* Output: 3W
* S/N Ratio: >75db
* Distortion: <1.0%
* Standby time: 8-10 hours
* Charging time: approx.3 hours
* Playing time: approx.6hours
* With 500mah BL-5C Lithium Battery.
1.Turn on our mobile phone and activate
the Bluetooth function.
2.Searching for Bluetooth device IE 101 will
show up.
3.Pair your device with IE101 if password is
needed, type in“0000”. After IE101 is paired
with your device,connect it to your device.
Tips
Once this speaker is paired and connected
to your mobile phone,the next time speaker
is turned on, it will automatically pair back
to the last paired device,as long as the last
paired device’s Bluetooth setting is turned
on.
Button description
On/Off:to switch on or off the unit.
Short press for the previous song.
Long press to turn down the volume.
Short press for the next song. Long
press to turn up the volume.
Play/ pause the music.
Phone: to pick up or hang up a phone call
Notes and tips:
1.You can press Phone button twice quickly
to redial the last phone call.
Accessories included:
1.USB charging cable
Charge Integrated Battery
“This Bluetooth Speaker is powered by an
integrated rechargeable lithium battery.”
1.When the LED indicator light turns red, the
battery is being charged.
2.When the red LED indicator light turns off,
the battery is fully charged.
Pairing
When Bluetooth Speaker is in power off
mode, press and hold the on/off button for
about 6 seconds until the red LED and blue
LED are flashing alternatively. Now the
speaker is ready for pairing.
Tips:
Please make sure the speaker is in power off
mode when trying to activate the pairing
mode.
DC5V
Problem
Cannot switch
the speaker on
Unable to pair
the speaker
Speaker is
already switched
on, and it is not
in pairing mode
Refer to the
section of paring
IE101 to mobile
phone or other
device
Battery empty Charge the
battery
Causes Solutions
www.lifensoul.com