631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2012 Philips Group • D0112
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite®Accessories/Options SCA
Page 1 of 1 Accessory Sloped Ceiling Adapter
1. Identify Trim Aperture: Complete fixture consists of slope adapter, trim kit, frame-in-kit and SCAHID kit ( if needed) , order each separately.
Catalog Number Aperture Line Voltage CFL HID LED
7920 4" A7053, A7701, 7082, 7782,
G7057, A7058MG
8011 C439P20, C420T4,C439T4, C470T4 series frames
and compatible trims.
C4L05, C4L10
7925 6" B7054, B7705, B7780, 7084,
7784, E7059, B7760
8021, 8031, 8051,
8052, 8091
C6P39,C6P70,C6P10, C670, C610, C639T6,C670T6,
C615T6 series frames and compatible trims.
C6L15
7926 7" C7055, C7709 , 7790QD,
7794QD
8037, 8022, 8056,
8096, 8097
C770, C710,C715 series frames and compatible
trims.
C7L1520
7927 8" 8023, 8038, 8039,
8068
Note: HID and 4"LED applications require SCAHID Kit (sold separately) SCA NOT compatible with enclosed frame-in-kits.
3/8”
Features
1. Slope Ceiling Adapter: 16 ga. spun aluminum, matte white finish.
Installs with standard recessed fixture in sloped ceilings without changing
the vertical axis of the fixture or its lighting characteristics. *The slope
ceiling adapter is available the following slope angles: 5°, 10°, 15°, 20°, 25°,
30° (maximum). When ordering, specify Catalog number and Adapter.
Example: Adapter suffix for 7920 series in 20° slope ceiling is 7920MF
2. Perforated Tabs (4): Provide temporary support for the slope ceiling
adapter during installation.
3. Locking Screws (4): Secure slope ceiling adapter to mounting frame of
fixture.
4. Representative Fixture: (shown) Fixture must be supported by ceiling
structure — not Slope Ceiling Adapter.
Alzak® is a registered trademark of ALCOA.
Recessed Fixture with Duo-Cast Recessed Fixture with Modular Recessed H.I.D. Fixture without
Reversible Trim Flange Mounting Frame Duo-Cast Trim Flange
Detail of Attaching Fixture to Sloped Ceiling Adapter
2. Specify desired degree of slope ex. 7920MD 4" aperture with 10° Slope
MC 5° MD 10°ME 15°MF 20°MG 25°MH 30°
