Linegrip lineScale 3 User manual
Technical Specications
do NOT submerge in water!!!
Quick Start Guide
This quick guide will get you started with the basic, most frequent operating functions.
Please refer to the overleaf instructions for MENU operation and personal setup.
You will nd a detailed users manual, FAQs, and knowledge-base onwww.linegrip.com/LS3
lineGrip Corporation Ltd.
NOTICE FOR PPE APPLICATION
Please fully read and understand the included PPE manual
before using the LineScale-3 for PPE application!
Technical Specications
do NOT submerge in water!!!
Quick Start Guide
This quick guide will get you started with the basic, most frequent operating functions.
Please refer to the overleaf instructions for MENU operation and personal setup.
You will nd a detailed users manual, FAQs, and knowledge-base onwww.linegrip.com/LS3
lineGrip Corporation Ltd.
NOTICE FOR PPE APPLICATION
Please fully read and understand the included PPE manual
before using the LineScale-3 for PPE application!
LineScale-3 MENU Scheme v3 - Oct. 2021
When in Main-Menu, the top most row will display the date, firmware version, and time.
01.10.21 V1.827 16:45
Main Menu Sub Menu Item Buttons function for navigation and setting
(w. sample setting) (possible settings)
Log
Return
Date/Time Date format Same button function as set value
Same button function as set value
Same button function as set value
Return
User Settings Same button function as select value
Same button function as select value
Same button function as select value
Return
Set absolute zero
Simple calibration
Linear calibration
Same button function as set value
Same button function as set value
Return
Exit
Clear log memory
NO
Sure delete all logs?
NO
YES
When enter item, NO is highlighted, press to
return without deleting. Select YES and press
to clear log memory and return to Sub-Menu
Onboard memory log
ON
Onboard memory log
ON
OFF
When enter item, current setting is highlited
Select ON or OFF
press to set and return to Sub-Menu
Overwrite oldest log
ON
Overwrite oldest log
ON
OFF
When enter item, current setting is highlited
Select ON or OFF
press to set and return to Sub-Menu
Capture start trigger
1.00 kN
Set start trigger
x.xx
00000 for none
When enter Item "value" is highlited
press to set value
first digit is highlited
change digit with and to set
next digit is highlited
change digit with and to set
repeat same for all digits
on last digit
press to set value and return to Sub-Menu
Enter 000 for no triggers or recording
press to set and return to Sub-Menu
Capture end trigger
12.00 kN
Set end trigger
x.xx
00000 for none
Max log length
180 sec.
Set max log length
xxxxx
Pre-capture rec. time
10 sec.
Pre-capture recording
xxxxx
00000 for none
Press to exit Sub-Menu, and return to Main-Menu
Date format
dd.mm.yy
yy/mm/dd
Date
01.10.21
Set date
xx.xx.xx
Time
16:45:00
Set time
xx.xx.xx
Press to exit Sub-Menu, and return to Main-Menu
Auto power off
5 min.
Set auto power off
Off, 1, 3, 5, 10, 20, 30, 60
Set display power off
300 sec.
Set display power off
Off, 10, 30, 60, 100,
200, 300, 600
Auto zero tracking
1 div.
Set zero tracking
Off, 0.5, 1, 2, 3, 5, 10
NONE
Press to exit Sub-Menu, and return to Main-Menu
Service
WARNING
Operate carefully in
this menu!
Wrong settings can
render the LS3
inoperative!
Please note:
There is NO factory
reset option!
If the calibration
parameters are
altered to invalid
values the LS3 will
no longer show
accurate loads.
A professional
calibration will be
necessary.
Cal. abs. zero now?
NO
YES
When enter item, NO is highlited, press to return
Select YES
press to cal abs. 0 and return to Sub-Menu
Start simple cal now?
NO
YES
When enter item, NO is highlited, press to return
Select YES
press to start simple 2-point calibration
Start linear cal now?
NO
YES
When enter item, NO is highlited, press to return
Select YES
press to start linear 3-point calibration
Calibrate acceler.
9.792 N/kg
Set cal. accel.
x.xxxx
User acceleration
9.807 N/kg
Set user accel.
x.xxx
Battery voltage
3.985 V
No setting,
value for information only. Note:
Press the MENU button at any time during
item setting to abort setting operation and
exit to the SUB-Menu without saving any
changes to the current item ;-)
AD internal code
3513
No setting,
value for information only.
Bluetooth MAC addr.
F0:F8:F2:6A:D1:25
No setting,
value for information only.
Press to exit Sub-Menu, and return to Main-Menu
Press to exit menu, and return to display screen
Popular Sport & Outdoor manuals by other brands
Vertical Reality
Vertical Reality 1 BAY Operation manual
Jaypro Sports
Jaypro Sports RGB-3 installation manual
Lifetime
Lifetime PROCOURT 90073 Assembly instructions
Progress
Progress HangTime Wall Mount quick start guide
Tibhar
Tibhar Robo Pro Junior instruction manual
Arena
Arena Powerskin Carbon Series How to fit
Bestway
Bestway P04498 owner's manual
Harrod
Harrod FBL-674 quick start guide
Everbrite Electronics
Everbrite Electronics All American Scoreboards MP-3529 Operating instructions and service manual
MARIMEX
MARIMEX Comfort Assembly & instruction manual
Aquaglide
Aquaglide PLATINUM Fiesta owner's manual
MEGAlink
MEGAlink ML2000 user manual