
EM-L59BO
Foldable Extra Slim LED Work Light
•There are no user serviceable parts in this fitting.
•Periodically wipe the housing and heat sinks to maintain proper heat
dissipation.
•Ensure the power supply is switched off before servicing.
•Ensure that this task light is connected to a suitably earthed power supply only
.
•This task light should be carried using the handle only. Do not carry/move the
task light by the cable.
•This task light must be mounted on a non-flammable surface.
•Do not use this task light if it appears damaged in any way.
•This task light should be positioned so that it will not be accidentally knocked.
•This task light must be installed and used in accordance with the current edition
of the IEE iring Regulations.
•Ensure the task light use under temperature condition from 0°c to 40 °c.
I in doubt, contact a quali ied electrician.
•This task light is designed to be used freestanding.
•Before use, ensure that the task light and cable do not appear damaged.
•Adjust the stand to the required angle.
•Connect the task light to a suitable power supply.
•Switch the task light on by operating the push switch on the rear.
•hen using the task light, ensure that the lead does not cause an obstruction.
•Ensure task light is switched off by the rear switch before disconnecting from
the supply.
•Ensure the task light is disconnected from the supply when no longer required.