Link2Home EM-2711B User manual

Instruction Manual for
Outdoor Single Stake LED Light with Photocell Countdown
Type: EM-2711B
A. INSTALLATION
(Caution: Only plug into an electrical socket after you assembled the main light to the ground stake)
1. Screw the stake into the main light
2. Drive the stake into the ground
3. Plug into an electrical socket
Note:
1. Screw must be locked tight
2. The light source for the luminaires is not replaceable;
when the light source reaches the end of its life, the whole
luminaire must be replaced
B. Function
OFF: The light always OFF.
ON: The light always ON, and the LED indicator will also always on.
2Hrs: The light ON at dusk, will switch OFF in 2 hours automatically.
4Hrs: The light ON at dusk, will switch OFF in 4 hours automatically.
6Hrs: The light ON at dusk, will switch OFF in 6 hours automatically.
8Hrs: The light ON at dusk, will switch OFF in 8 hours automatically.
DUSK-DAWN: The light will ON at dusk, and OFF at dawn
automatically.
C. Specifications
1. Power required: 100-130V~ 50/60Hz, 4.4W
2. Protection class: Wet Location
The minimum distance from lighted object is 3.3ft
Indication LED Photo Cell

Caution:
1. During countdown process, if photocell detects daylight, the countdown function will be disabled. If it
detects dusk again, the countdown will re-start from the very beginning.
2. During countdown process, if you change the mode manually, it will disable the current one, and enter
into the new one.
Made in China
Imported by Paragon Group USA
Englewood, NJ 07631 USA
1.888.783.6082
Paragon Group USA Inc.
Link2Home Product Division
Englewood, NJ 07631
USA
LINK2HOME
1 YEAR LIMITED WARRANTY
IMPORTANT: Proof of Purchase is required to obtain warranty service
Paragon Group USA Inc. warrants to the original owner that our products will be
free from defect in workmanship and material for a period of ONE YEAR
from the date of purchase. Should any unit(s) prove to be defective during
this period, Paragon Group USA Inc. will be responsible for replacement of the
defective unit(s) only. Paragon Group USA Inc. is not responsible for labor
charges or any incidental or consequential expenses.
Not Covered – Batteries are not covered by this warranty. Repair service,
adjustment and calibration due to misuse, abuse or negligence are not covered
by this warranty. Unauthorized service or modification to this product or of any
furnished components will void this warranty in its entirety. This warranty does not
include reimbursement for inconvenience, installation, set-up time, loss of use,
postage, unauthorized service, or other products used in
conjunction with Link2Home products.
For warranty service, please contact Paragon Group USA Inc.
Customer Service by Phone: [phone] or
e-mail: [email protected].
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.