Linx Memoire 10.2B User manual

User’s Guide for
Linx Digital Photo Frame
(MEMOIRE10.2B)

Tabel Of ContentsTabel Of Contents
Safety Warning---------------------------------------------------------------------------------------------
About the Rechargeable Battery------------------------------------------------------------------------
Features-------------------------------------------------------------------------------------------------------
Parts Introduction---------------------------------------------------------------------------------------
Remote Control Introduction----------------------------------------------------------------------------
Rear Panel Introduction----------------------------------------------------------------------------------
Remote Control Installation-----------------------------------------------------------------------------
How to Use the Remote Control------------------------------------------------------------------------
Memory Card Insertion and Removal-----------------------------------------------------------------
Mini USB Port to connect to a Computer--------------------------------------------------------------
OSD Menu Setup-------------------------------------------------------------------------------------------
Basic Operation------------------------------------------------------------------------------------------
Viewing Photos-------------------------------------------------------------------------------------------
Enjoy Music-----------------------------------------------------------------------------------------------
Enjoy Movies-----------------------------------------------------------------------------------------------
File Navigation-------------------------------------------------------------------------------------------
Setup------------------------------------------------------------------------------------------------------
Calendar--------------------------------------------------------------------------------------------------
Troubleshooting--------------------------------------------------------------------------------------------
2
2
3
4
4
5
5
5
6
6
7
7
7
9
9
10
10
11
11
1
Welcome To Linx!
On behalf of Linx AV we would like to thank you for purchasing this Memoire Digital Photo Frame
and hope that you will enjoy viewing and sharing your pictures with all your friends and family!
We have made a number of amazing changes to the new Memoire Photo Frames and it is worth
taking a few seconds to run through these with you so that you can get best experience possible
from your Digital Photo Frame.
LIFE transition - bring your old photo's and memoires back to LIFE! Linx has worked hard to
develop the stunning new LIFE transition mode that intuitively zooms in on and smoothly
changes between your images to really "bring your photos back to LIFE"
Auto-Tilt Auto orientation of your picture when you orientate frame from Landscape to Portrait
User Interface Easy navigation through folders and settings with simple icons
Intuitive Buttons - Easy navigation through folders and settings with ergonomically designed
control buttons.

SAFETY WARNING
The digital photo frame should be used indoors only.
Use a DC 9.5V/3A power adapter.
To reduce the risk of fire of electric shock, do not expose this appliance to the rain or moisture.
Do not block the ventilation holes on the back of the digital photo frame at any time.
Keep your digital photo frame out of sunlight. Direct sunlight may cause damage.
Do not splash or fill the digital photo frame with liquids.Keep clear of liquids.
Keep the LCD screen clean and treat it gently. Avoid touching the LCD directly.
If you need to clean the LCD screen, please make sure the digital photo frame is switched off
and the mains cable unplugged . And then use a soft cloth and spray the solutions on the soft
cloth first(Use only LCD specific cleaner).
Always position the digital frame on a suitable and level surface.
The digital frame only complies with the voltage type specified on the back.
Working Conditions:
Operating Temperature: 0 C～ +45 C
Humidity:20%～ 80%
For an environmentally friendly operation and to save gently,please switch off the mains
supply when the digital photo frame is not in use.
In order to prevent damage to the memory card or the digital photo frame, please switch off
your digital photo frame before removing or inserting your memory card.
About the built-in Polymer Li Battery:
1.Plug the AC plug of adapter into standard power socket and the other DC output plug
into the machine socket labeled with DC 9.5V.The recharge will start without any
interference to the frame's operation.
2.It takes approx about 4-5 hours to fully recharge.To optimize the service life of the
battery,the duration of recharging should be less than 8 hours.
3.The rechargeable battery discharges gradually when not in use and after approximately
one month the battery will be fully discharged.
About The Rechangable BatteryAbout The Rechangable Battery

10.2 Inch 16:9 TFT Screen viewable area 10.2”
Picture,audio&video playback:JPEG /MP3/AVI/Motion-JPEG
Supports SD/MMC/MS/XD memory card
Supports high speed USB 2.0
Earphone jack for headset connection
Horizontal/Vertical Image orientation supported
Supports thumbnail and slide show
Photo slide show with MPP3 music
Photo with multiple transition effects: Zoom in & Rotate function
Now includes the stunning new “LIFE” transition effect.
To copy/delete available file(s) without the need for a computer
Built-in 2 X 1.5W stereo speakers and with internal NAND memory (128MB)
Built-in calendar,clock,alarm,auto power on/off function
Built-in re-chargeable battery
Power: AC 100 ～240V,50/60Hz input ;
DC9.5V,3A output
Power Consumption: ≤22W
Dimensions:295 X 203 X 35 mm.
Speaker Output Power:0.75W
Speaker S/N: 60
Weight:0.75kg
Supports Audio Format: MP3
Supports Video Format:AVI,DivX,Xvid,Motion-JPEG
Supports Photo Format:JPEG
Supports Memory Cards:SD/MMC/MS/XD
Supports USB : USB Host & USB Device Ports
Built-in Li-polymer Battery:1600Amh
Please chech and identify the contents of the box of your player package,as list below:
Digital Photo Frame
User's Manual
Remote Control
Button Battery(For the remote Control)
AC Adapter
Stand 1Set
Tip:
Connect the Linx B-Tube or B-Tube lite for an enhanced audio experience!(not provided with
the Frame)

1.MENU-To access the main menu.
2.POWER-Switch the digital photo frame to either standby or ON.
3. EXIT-To stop the current the playback and return to the previous menu.
4. ENTER-To start the playback or to confirm selections.
5. Direction Buttons( )-To select menu items or settings.
6. VIEW-To access the file overview menu.
7.MUSIC-Automatically play music if present in the device.
8.PHOTO-Automatically play images as a slide show.
9.BACKMUSIC-To play background music(MP3) during a photo slide show.
10.ROTATE-To rotate the orientation of the images while displaying photos.
11. / (PREV& NEXT)-Skips to the previous or next photo,track or page.
12.MUTE-To turn off the speaker/pressing it again turns MUTE off.
13.PAUSE-To pause the playback.
14.16:9/4:3-Switch the aspect ratio of the displayed images.
15.STOP-To stop the playback.
16.VOL+/- -To adjust the volume level.
17.OSD-On Screen display.
18.SETUP-To access the photo frame setting menu.
19.MOVIE-Play the movie present in the memory card /USB device or internal memory.
20.ZOOM-To zoom in the display image/video.
21.CALENDAR-To access the calendar display menu.
22. / (REV&FWD)-To fast rewind or forward search.

When inserting the memory card,please make sure the card's label FACES AWAY from the
LCD display.
1.M:To access the main menu.
2.OK Button
3.Direction Buttons
4. : Press and hold about 8 seconds to
turn on or off the photo frame.
5.SD/MMC/MS/XD Slot
6.Mini USB Port:To connect to a computer
7. USB Port: To connect to an external USB
device
8. Earphone Jack
9. DC 9.5V,3A Jack
10. Stand
Remove the button battery compartment cover,insert the button battery(make sure the
polarities of the battery match correctly).And then replace the button compartment cover.
After having prepared the remote control, direct it towards the remote sensor on the
frame's front panel.The remote control is operational within a distance of 2m.
When using the remote control,make sure no obstacle placed between the remote
control and remote sensor.
The battery normally last around one year.Remove the battery when not using the frame
for a long time.
Dispose of used batteries according to the local ordinance regulations.
5

fla sh
memory card
fla sh
memory card
Memory Card Insertion and Removal
Please make sure the digital photo frame is powered off when inserting or removing
the memory card.
When inserting the memory card, please hold the memory card by its edges and gently insert
it into the appropriate slot with the label on the memory card facing away from you when the
frame is facing in your direction).
Make sure there is at last one available file on the memory card.
.
SD/MMC/MS/XD cards supported
Mini USB Port to connect to a Computer
Power on the digital photo frame,then connect it to a USB port on a computer via a USB
cable(not supplied).Once connected to the computer, the digital photo frame will display a
message stating that the connection has been established to a computer.You can transfer files
between the computer and memory devices inserted or built-in memory in the digital photo
frame.
6
USB drive
When you connect the frame to a computer, then insert the USB drive into the frame, the USB
drive will not be recognized.

1. Once removed from the packaging, the digital photo frame can be securely placed on a flat
surface using the extendable stand attached to the rear of the frame.
2. Insert the adapter DC plug into the unit, then plug the adapter into a standard outlet.
3. Insert the available memory card or USB device into the corresponding slot.
4. Press and hold button on the rear of the frame for 8 seconds, the frame will power on
with the start-up screen, and then the main menu will appear as below:
5. Use or direction button to highlight an item that you want to enter and press ENTER
button on the remote control or OK on the rear of the frame to enter the sub-menu.
6. Press MENU button at any time to return to the main menu.
Quick Tip!!
Once you insert an external device, you can play photo/music/movie or overview the file
information just by pressing the respective button(PHOTO/MUSIC/MOVIE/VIEW) on the
remote control directly.
To view photos, make sure there are photos in JPEG format stored on the inserted device. The
player supports two modes for viewing an image: thumbnail mode and slide show mode.
1.After the above basic operation,you can use or direction button to highlight USB/SD/
Memory/ icon on the main menu and press ENTER on the remote control to confirm.
2.The screen will display the mode selection screen. There are four modes are available:
Movie,Music,Photo and File.
3.Use or direction button to highlight Photo icon(the third icon) and press ENTER
on the remote control to confirm. A screen with 15 thumbnail images will appear. Use
direction button to navigate among different image and use or to skip to the
previous or next page.
4. After highlighting an image, press ENTER on the remote control to enter into full screen
mode(PAUSE mode).
5. While viewing a single image, you can move to the previous/next image by or
buttons.
6. Press EXIT button to return to the thumbnail screen.
7
PhotoPhoto
Note:SD+USB icons will only be
displayed if devices are connected
to the Frame.

Quick Tips!!
- While viewing a single image,you can press PAUSE button to start a slide show.
-Press the PLAY button on the remote to enter into Slide show mode(if selected).
On Screen Display
While viewing photos,pressing OSD button on the remote control will display an infor bar
On the screen.Use or direction button to highlight the item and use ENTER button to
activate this function.
The functionalities of each icon on the menu is described below:
1.Return to the previous image. 2.To start or pause the slide show.
3.Go to the next image. 4.To rotate images.
5.To stop the playback and back to the thumbnail screen.
6.To zoom in the image. 7. Photo file name.
An image can be zoomed in by using the ZOOM button on the remote control.
Repeatedly pressing this button will zoom in to various levels and finally return to
original image.Use direction buttons to move the image for viewing in zoom in mode.
During a photo slide show or viewing a single image,an image's display orientation can
be rotated by using the ROTATE button on the remote control.Every time you press this
button,the image rotates 90 degrees clockwise.
If music in Mp3 format is stored in the same device as that of the photos,then you can
play background music for slide show.During an image slide show,press BACKMUSIC
button on the remote control and the music will start.
PAUSE/STOP
You can pause the slide show by pressing PAUSE button on the remote control.Press
it again to resume.While pressing STOP button on the remote control to stop the slide
show and return to the thumbnail screen.
Change aspect ratio
The frame has a wide screen with 16:9 aspect ratio.However most of the consumer
camera's taken image in 4:3 aspect ratio.The frame's default setting is to show slide
show in full screen mode without distorting the image. You can alternate aspect ratio
between 16:9 and 4:3 by repeatedly pressing 16:9/4:3 button on the remote control.
ZOOM IN An Image
Rotate An Image
Background Music
IMG_4657.JPG
.
If you want to change the transition effects or time interval for time slide show,please
refer to the SETUP chapter.
8

1.From the main menu to choose the inserted device and then choose Music icon on the four
mode selection screen.
2.Press ENTER button on the remote control to enter music files preview menu.
3.Use or direction button to highlight the music then press ENTER button to start the playback.
The related information of the playing file will be displayed on the down-right screen.
4.You can use or to change a new music and start playback automatically.While the
music can be fast forward or backward by repeatedly pressing or button.
5.Adjust the volume by pressing the VOL+/- button on the remote control.Press MUTE button
to turn off the speaker.
6.Repeatedly pressing PAUSE button will pause or resume the playback.
7.Press STOP button to stop the current playback and press ENTER button to resume it.
Enjoy Music
Before you can enjoy music, please make sure there are MP3 file(s) on the internal memory
or inserted device.
.
If you want to change the repeat mode for music,please refer to the SETUP chapter.
1.From the main menu to choose the inserted device and then choose Movie icon on the four
mode selection screen.
2.Press ENTER button to enter movie files preview menu.The related information of the playing
file will be displayed on the down-right screen.
3.Use or direction button to highlight the movie then press ENTER button to start the playback.
4.During movie playback,pressing OSD button on the remote control will display an infor bar
on the screen.
5.Use or direction button to highlight the item and use ENTER button to activate this function.
The functionalities of each icon on the menu is described below:
6.Use or to change a new movie and start playback automatically.The movie can be
skipped forward or backward by repeatedly pressing or button.
7.During playback,the video can be zoomed in by using ZOOM button on the remote control.
Repeatedly pressing this button will zoom in to various level and finally return to the original
video.Adjust the volume by pressing the VOL+/- button on the remote control.Press MUTE
button to turn off the speaker.
8. Repeatedly pressing PAUSE button will pause or resume the playback.
9. Press STOP button to stop the current playback and return to the movie preview menu.
Enjoy Movies
1.To return to the previous movie. 2.Fast backward
3.To start or pause the playback. 4.Fast Forward
5. Go to the next movie 6. To stop the playback and back to the
movie preview menu.
7. To zoom in the image 8. Playback time display
9
Tip:
Enhance your audio experience by attaching a Linx B-Tube/B-Tube Lite(not supplied with the Frame).