
Read this user manual and in particular the safety notes, before
using the product.
Keep the user manual for future reference and include it when
passing the product on to third parties.
Liquid Ears will not in any way be held responsible for injury or
damage caused to persons or property arising from misuse of the
product.
Charging
For first time use, charge the battery to full capacity. To charge, plug
the charging cable into the product charging port connecting it to a
charger/pc with a USB port (5V, 1A). The blinking blue lights inside
the charging case shows the progress. When the lights are still, the
charging case is fully charged.
Once you place the earphones inside the charging case, the charge
will start and a red light will turn ON on each bud. When the red
light turns OFF, the earphones are completely charged.
Turning on and pairing
Remove the earphones from the charging case and they will
automatically turn ON. The earphones must be connected to a
device within 10 minutes, otherwise the earphones will go into
power saving mode. To activate the pairing mode again, simply put
the earphones back in the charging case and wait a few seconds
before doing the above procedure again. Turn ON the Bluetooth® on
your device, go to Bluetooth® menu, search for "LEBTWSWH" or
"LEBTWSBK", select to pair and connect. You will hear “Connected”
sound when pairing is complete.