Listen LA-326 User manual

Dear Valued Customer,
Thank you for choosing Listen! All of us at Listen are dedicated to providing
you with the highest quality products available. We take great pride in their
outstanding performance because we care that you are completely
satised. That’s why we independently certify them to the highest quality
standards and back them with a limited lifetime guarantee. We stand ready
to answer any questions you might have during installation or in the operation
of our products. Should you experience any problems whatsoever with your
Listen products, we are ready to help you in any way we can with prompt,
efcient customer care. Because at Listen, it’s all about you! And should you
have any comments on how we might improve our products or our
service, we’re here to listen.
Here’s how to reach us:
+1.801.233.8992
1.800.330.0891 North America
+1.801.233.8995 fax
[email protected]
www.listentech.com
Thank you and enjoy your listening experience!
Best regards,
Russell Gentner and the Listen Team
• In the few instances where repairs were needed, 99% of all clients indicated that they were happy with
repair turn-around-times and 85% of the time, clients were without their product for less than 10 days!
• Overall client satisfaction of working with Listen was rated 4.8 out of 5.
• “ Please continue with your excellent attitude toward customer satisfaction. You guys are great!”
• “I’ve never had such good service from any company. Keep up the good work!”
• “You stand behind your product wonderfully.”
Assistive Listening • Language Interpretation • Soundeld • Tour Group • Conferencing

1
Table of Contents Package Contents Setup Instructions Information
Package Contents 2
Single Unit Conguration 3
Dual Unit Conguration 4
Supplementary Information 6
Optional Accessories 8
Compliance Notice/ FCC Statement 9
Warranty/ Contacting Listen 10
Notes 11
LA-326 Table of Contents

2
Information Setup Instructions Package Contents Table of Contents
LA-326 Package Contents
Listen Part Number
LA-326-Rack Mounting Kit
LA-326 Contents
• Part A-Left Side Bracket
• Part B-Right Side Long Bracket
• Part C-Right Side Short Bracket
• Part D-Dual Mount Center Bracket
• Part E-10 Machine screws
Part B
Right Side Long Bracket
Part A
Left Side Bracket
Part C
Right Side Short Bracket
Part D
Dual Mount Center Bracket
Part E
Ten (10) Machine Screws

3
Table of Contents Package Contents Setup Instructions Information
LA-326 Single Unit Conguration
1
2
3Install part A
Install part A to the left side of unit using two screws from bag E. Use the set of holes toward the front of
the bracket, making this part flush with the front edge of the unit.
4Install part B
Install part B to the right side of unit using two screws from bag E. Again, use the set of holes
toward the front of the bracket, making it sit flush with the front edge.
5Install Antenna
Optional: Install the LA-125 or LA-126 antenna kit. Antenna kit is purchased separately.
6Mount
Mount in rack.
bottom of
unit
front of unit
part B
part A
Locate Parts
Locate parts A, B and bag E. The remaining parts and six of the screws in bag E will not be used in
this configuration
Remove Screws
Remove the four outer screws from the bottom of the unit you are rack mounting.

4
Information Setup Instructions Package Contents Table of Contents
LA-326 Dual Unit Conguration
Dual Units without Security Cover
- +
figure A
1
2
Locate Parts
Locate parts A, C, D and and bag E. The remaining parts will not be used in this configuration.
Remove Screws
Remove the four outer screws from the bottom of the unit you are rack mounting.
3Pick Sides
Determine which unit will be on the right side of the rack (unit “1”).
4Install part C
Install part C to the right side of unit “1” using two screws from bag E. Again, use the set of holes
toward the front of the bracket, making this part flush with the front edge.
5Install part A
Install part A to the left side of unit “2” using two screws from bag E. Again, use the set of holes
toward the front of the bracket, making this part flush with the front edge.
7Remove Screw
Remove the screw that is near the remote antenna
connection on the rear of unit “2”.
Install part D
Install part D to both units using six screws
from bag E. See figure A.
8
Remove Screw
Remove the screw that is near input 1 connection on the rear of unit “1”. See figure A.
6
9Mount
Mount in rack.

5
Table of Contents Package Contents Setup Instructions Information
LA-326 Dual Unit Conguration (cont.)
bottom of unit “2”
front of units
part C
part A
part D
bottom of unit “1”

6
Information Setup Instructions Package Contents Table of Contents
Information about Antennas for Rack Mounted FM Equipment
An antenna is not included with the LA-326. All antennas must be purchased
separately. Top mount telescoping antennas cannot be used with a rack
mounted unit.
LA-122
The LA-122 Universal Remote antenna is a great option for a rack mounted
units. This kit allows both a monopole and dipole configuration, depending
on your needs, and can be mounted to a wall, ceiling, electrical box or a
mast. It includes antenna’s for both 72 and 216 MHz units. It also includes 25
feet of coaxial cable with BNC connections.
for use with 216
or 72 MHz units

7
Information
Table of Contents Package Contents Setup Instructions Information
Information about Antennas for Rack Mounted FM Equipment
LA-125 and LA-126
The LA-125 and LA-126 kits are also great options for rack mounted units (LA-125 for
72 MHz units and LA-126 for 216 MHz units). These kits can only be installed when
using Single Unit Configuration. These kits bring the antenna connection from the
rear of the LT-800 or LR-100 to the front of the rack unit, where a 90 Degree Helical
Antenna is connected.
LA-107
The LA-107 is another antenna kit to consider if you are using 216 MHz units. This
antenna is similar to the LA-122 except it includes 50 feet of coaxial cable and is
terminated with a weatherproof º wave antenna. The LA-107 kit includes a bracket
for remote mast mounting.
LA-126 shown
Configuration 1 shown
for use with 216 units only

8
Information Setup Instructions Package Contents Table of Contents
Optional Accessories
Accessories
LA-125 (72 MHz) and LA-126 (216 MHz)
Antenna Kit for Rack Mount

9
Information
Table of Contents Package Contents Setup Instructions Information
Compliance Notice & FCC Statement
Compliance Notice
FCC Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to
FCC and IC Rules. In order to maintain compliance with FCC and IC regulations, shielded cables must
be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of manufacturer could void the user’s authority to operate
this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) These devices may not cause harmful interference, and (2) these devices must accept any
interference received, including interference that may cause undesirable operation.
Listen’s LT-800 Transmitter (216 MHz only)
Listen’s LT-800 transmitter is authorized by rule under the Low Power Radio Service (47 C.F.R. Part 95) and
must not cause harmful interference to TV reception or United States Navy SPASUR installations. You do
not need an FCC license to operate these transmitters. These transmitters may only be used to provide:
auditory assistance to persons with disabilities, persons who require language translation, or persons in
educational settings; health care services to the ill; law enforcement tracking services under agreement
with a law enforcement agency; or automated maritime telecommunications system (AMTS) network
control communications. Two-way voice communications and all other types of uses not mentioned
above are expressly prohibited.
This device must be installed by a trained audio professional or certified dealer of Listen. The user
can’t make any modifications to the unit without expressed written consent of Listen Technologies
Corporation. Any modifications made will void the FCC compliance, Listen warranty and the users
authority to operate Listen’s equipment.

10
Information Setup Instructions Package Contents Table of Contents
Warranty & Contacting Listen
Warranty
Listen Technologies Corporation (Listen) warrants its transmitters and receivers (LT-82, LT-700, LT-800, LR-100, LR-42,
LR-44, LR-300, LR-400, LR-500, LR-600) to be free from defects in workmanship and material under normal use and
conditions for the useful lifetime of the product from date of purchase.
Listen warrants its Stationary IR Radiators (LA-140) to be free from defects in workmanship and material under normal
use and conditions for three years from the date of purchase.
Listen warrants its Noise Canceling Microphone (LA-270) to be free from defects in workmanship and material under
normal use and conditions for one year from date of purchase.
Listen warrants its Charging/Carrying Cases (LA-306, LA-311, LA-313, LA-317, LA-318, LA-319, LA-320, LA-321, LA-322,
LA-323, LA-324, LA-325) to be free from defects in workmanship and material under normal use and conditions for
one year from date of purchase.
All other products and accessories are warranted for 90 days from date of purchase.
This warranty is only available to the original end purchaser of the product and cannot be transferred. Warranty is
only valid if warranty card has been returned within 90 days of purchase. This warranty is void if damage occurred
because of misuse or if the product has been repaired or modied by anyone other than a factory authorized
service technician. Warranty does not cover normal wear and tear on the product or any other physical damage
unless the damage was the result of a manufacturing defect. Listen is not liable for consequential damages due to
any failure of equipment to perform as intended. Listen shall bear no responsibility or obligation with respect to the
manner of use of any equipment sold by it. Listen specically disclaims and negates any warranty of merchantability
or tness of use of such equipment including, without limitation, any warranty that the use of such equipment for any
purpose will comply with applicable laws and regulations. The terms of the warranty are governed by the laws of the
state of Utah.
In the rst ninety days after purchase, any defective product will be replaced with a new unit. After 90 days, Listen
will, at its own discretion either repair or replace transmitters and receivers with a new unit or a unit of similar type
and condition. Product that is not covered under warranty shall be repaired or replaced with a unit of similar type
and condition based on a at fee. Contact Listen for details.
This limited warranty, prices and the specications of products are subject to change without notice.
Contacting Listen
If technical service is needed, please contact Listen. Pre-authorization is required before returning Listen products.
If products were damaged in shipment, please contact the carrier, then contact Listen for replacement or repair
requirements payable by the carrier.
Listen’s corporate headquarters are located in Bluffdale, Utah U.S.A. and are open Monday through Friday, 8am to
5pm Mountain Time.
14912 Heritagecrest Way
Bluffdale, Utah 84065-4818
+1.801.233.8992
+1.800.330.0891 North America
+1.801.233.8995 fax
[email protected]
www.listentech.com
Listen Technologies GmbH
Jasminstr.16, 90522 Oberasbach, Germany
[phone] Europe
[phone] Fax
[email protected]
www.listentech.de

11
Information
Table of Contents Package Contents Setup Instructions Information
Notes

Listen Technologies Corporation
14912 Heritagecrest Way
Bluffdale, Utah 84065-4818, U.S.A.
+1.801.233.8992
1.800.330.0891 North America
+1.801.233.8995 fax
www.listentech.com
Printed in the United States of America
© 2010 Listen Technologies Corporation®All Rights Reserved 06252010