5. Place the camera close to the router and ensure that the network environment has
strong and stable signals.
6. Verify that your device has been added over a WiFi band of 2.4GHz. Check whether
the 2.4GHz band and 5GHz band share the same WiFi account. If so, we recommend
that you configure two accounts and switch to the 2.4GHz band during network
connection.
EN
A: Please follow these instructions:
1.Click the "..." icon located in the top right corner of the live video interface.
2.Click on "Recording Settings".
3.Turn on "Local Recording". The camera will automatically begin recording video.
4.Select "Recording Mode", and "Event Recording". The camera will now automatically
record video when motion is detected.
5.Select "Recording Mode", and "Non-Stop". The camera will continue to record video.
If you want to watch motion detection videos you will need to use either an Micro SD
card or a cloud service, if you are already using one of these, follow these steps to
check for motion detection videos：
Q2: How do I record after inserting the Micro SD card?
Q3: How can I view motion detection videos instead of
screenshots?
