ENGLISH
MINI HOOP™ BASKETBALL SET
Ages 1 1/2 - 5 years
Please save sales receipt for proof of purchase.
WARNING:
ADULT ASSEMBLY REQUIRED.
• Keep these instructions for future reference.
• Prior to assembly, this package contains small parts:
hardware which is a choking hazard and may contain
sharp edges and sharp points. Keep away from children
until assembled.
• Place this product on a at surface for stability.
• To prevent tipping and potential injury, do not attempt
to stand the basketball set up without rst lling the base
with 40 lbs. (18.2 Kg.) of sand (not included) (Illus. 3). The
unit may fall over without weight in the base.
• Illus 4 - 9 - Follow net attachment illustrations 4 - 9 exactly!
Always make sure net is attached completely. Make sure
the label on the net is along the bottom edge.
IF BALL NEEDS AIR:
1. Use a standard athletic inating needle available at most
sporting goods stores.
2. Moisten needle to insert into plug.
3. A bicycle pump is recommended to pump air into ball.
4. Inate ball to approximately 6" (15 cm) diameter.
CONSUMER SERVICE
TOLLFREE NUMBER:
United States:
www.littletikes.com
1-800-321-0183 Monday - Friday
The Little Tikes Company
2180 Barlow Road
Hudson, OH 44236
E-mail: littletikes.cares@littletikescare.com
Printed in U.S.A. D.R.©2016 The Little Tikes Company
© The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of LittleTikes
in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging
appearance are the property of Little Tikes. Please keep this address and packaging for reference since
it contains important information. Contents, including specications and colors, may vary from photos
depicted on package. Instructions included. Please remove all packaging including tags, ties & tacking
stitches before giving this product to a child.
LIMITED WARRANTY
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this
product is free of defects in materials or workmanship for one year * from the date of purchase (dated
sales receipt is required for proof of purchase). At the sole election of The LittleTikes Company, the only
remedies available under this warranty will be the replacement of the defective part or replacement
of the product. This warranty is valid only if the product has been assembled and maintained per the
instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches
from normal wear, or any other cause not arising from defects in material and workmanship. *The
warranty period is three (3) months for daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at
www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180
Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after
warranty expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you
specic legal rights, and you may also have other rights, which vary from country/state to country/state.
Some countries/states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
Please keep this manual as it contains important information.
Adult assembly required
• Ball (included) may have deated during
shipping. See instructions for how to inate.
642005
XIM642005-1 - 1/16
www.littletikes.com
Visit our website at
www.littletikes.com
to register your product online and
to enter our sweepstakes.
(No purchase necessary)
6
It is recommended you customize the
rim decal before applying. Use either a
dry erase or permanent marker.
Hint: It is easier to apply decal 6 once
the rim is installed to the backboard.
Decal Placement: decals must be applied to a clean, dry surface. Wipe clean with a
dry rag before application. Remove air from under decals by applying pressure to the
decals starting from the center, and work towards edges.
21 3
Sand
40 lbs
(18.2 kg)
8
5
Hint: align the curved edge
of the decal to the curved
edge of the backboard.
Then apply.
4
2 3
1
Decals 2 and 3 must
be placed rst. Then
apply decal 1 so that
bottom ends overlap
decals 2 and 3.
7
4Net Assembly (steps 4-9)
