Logan LGIP3552 User manual

LGIP3552
L-I1720-B
LGIP720HD1
USER MANUAL
English / Español
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

INDEX
LAN –WAN Settings
•Network Setup with Logan Cam
•Setup on a Computer
Motion Detection
•Setup on Smart Phone
•Setup on a PC
SD Recording
•Setup on Smart Phone
•Setup on a PC
PC Recording
Backup Record
Image Settings
•Setup on Smart Phone
•Setup on a PC
4
6
10
13
14
16
18
19
20
21
23
25
26
28
All manuals and user guides at all-guides.com

LAN –WAN Settings
All manuals and user guides at all-guides.com

The following steps describe the configuration required for your
LGIP3552 camera from the comfort of your home.
You must connect the power supply of your camera and the
network cable has to be directly connected to the router where
you want the camera to make the connection.
All manuals and user guides at all-guides.com

1. Download the Logan Cam application (Blue Logo) through Play
Store for Android or App Store for iPhone
2. Run the application and enter the LAN option located at the
bottom of the screen:
Network Setup with Logan Cam
All manuals and user guides at all-guides.com
all-guides.com

3. The camera should appear in your application as ONLINE. Press
the blue icon on the right side to enter setup and press the Wi-Fi
option
All manuals and user guides at all-guides.com

4. Add the wireless network setup at your current location and
enter the WIFI Password then Press OK
5. A reboot of your camera will be automatically performed.
Disconnect the network cable from your camera and log back
into the application
All manuals and user guides at all-guides.com

6. Enter the data from your camera, located on the label on the
back, as shown in the example below (or you can scan the QR
code)
7. You have finished the configuration of your Camera and you
can enjoy both local and remote connection.
All manuals and user guides at all-guides.com

1. Download the Logan Cam PC application on our website
through the link http://www.logan-cam.com/articulo-softwares
2. Run the application and log in at the top right of the screen
LAN option:
Setup on a Computer
All manuals and user guides at all-guides.com

3. The camera should appear in your application in blue. Press the
right button on the camera to enter setup and select the Set
WiFi option
4. Activate the Wifi Launch Settings option and add the wireless
network set up on your current location and enter the security
key of it. Press OK
All manuals and user guides at all-guides.com
all-guides.com

5. A reboot of your camera will be automatically performed.
Disconnect the network cable from your camera and log back
into the application in the WAN section
6. Enter the data from your camera, located on the label on the
back, as shown in the example below (or you can scan the QR
code):
7. You have finished the configuration of your computer and you
can enjoy both local and remote connection.
All manuals and user guides at all-guides.com

Motion Detection
All manuals and user guides at all-guides.com

1. Enter the configuration of the computer and select the Alarm
Settings option
2. Active Motion Detection and SD Card Record. Specify the
sensitivity level of the sensor option in the Alarm (Alarm
Sensitivity). Then press OK
Setup on Smart Phone
All manuals and user guides at all-guides.com

If additionally you want to receive notification via email, you
must enter the following fields:
Receiver E-mail: mail you will receive alerts
Sender E-mail: mail that will send alerts
SMTP Server: Gmail (smtp.gmail.com) - Hotmail (smtp.live.com)
Encryption: SSL
SMTP Port: Gmail (465) - Hotmail (25)
SMTP User: mail sender, no special characters
SMTP Password: mail password
To verify, press the button “Send Test Email”. Press OK
All manuals and user guides at all-guides.com

1. Presione el botón derecho para ingresar a la configuración y
seleccionar la opción Alertas de Alarma (Email)
2. Active la opción de Detección de Movimiento e ingrese los
siguientes campos:
E-mail Destinatario: correo que recibe las alertas
E-mail Expedidor: correo que envía las alertas
Servidor SMTP: Gmail (smtp.gmail.com) - Hotmail (smtp.live.com)
Puerto SMTP: Gmail (465) - Hotmail (25)
Usuario SMTP: correo remitente, sin caracteres especiales
Encriptado de Datos: SSL
Password SMTP: contraseña del correo
Para verificar, presione el botón Test (Prueba). Presione OK
Setup on a PC
All manuals and user guides at all-guides.com
all-guides.com

As an additional recommendation we tell you that if you use
your Gmail account you should enable access to applications,
as indicated by the images below:
All manuals and user guides at all-guides.com

SD Card Recording
All manuals and user guides at all-guides.com

1. Enter the configuration of the computer and select the SD-
Card Settings option
2. Select the option Automatic Start Recording. Press OK
Setup on Smart Phone
All manuals and user guides at all-guides.com

1. Press the right button to enter setup and select the Settings
option SD Card
2. Activate the Automatic Recording Coverage Cycle. Press
Apply
Setup on a PC
All manuals and user guides at all-guides.com