Logan LGIP3552 User manual

LGIP3552
L-I1720-B
LGIP720HD1
USER MANUAL
English / Español

INDEX
LAN –WAN Settings
•Network Setup with Logan Cam
•Setup on a Computer
Motion Detection
•Setup on Smart Phone
•Setup on a PC
SD Recording
•Setup on Smart Phone
•Setup on a PC
PC Recording
Backup Record
Image Settings
•Setup on Smart Phone
•Setup on a PC
4
6
10
13
14
16
18
19
20
21
23
25
26
28

LAN –WAN Settings

The following steps describe the configuration required for your
LGIP3552 camera from the comfort of your home.
You must connect the power supply of your camera and the
network cable has to be directly connected to the router where
you want the camera to make the connection.

1. Download the Logan Cam application (Blue Logo) through Play
Store for Android or App Store for iPhone
2. Run the application and enter the LAN option located at the
bottom of the screen:
Network Setup with Logan Cam

3. The camera should appear in your application as ONLINE. Press
the blue icon on the right side to enter setup and press the Wi-Fi
option

4. Add the wireless network setup at your current location and
enter the WIFI Password then Press OK
5. A reboot of your camera will be automatically performed.
Disconnect the network cable from your camera and log back
into the application

6. Enter the data from your camera, located on the label on the
back, as shown in the example below (or you can scan the QR
code)
7. You have finished the configuration of your Camera and you
can enjoy both local and remote connection.

1. Download the Logan Cam PC application on our website
through the link http://www.logan-cam.com/articulo-softwares
2. Run the application and log in at the top right of the screen
LAN option:
Setup on a Computer