Logic Instrument FIELDBOOK F60 User manual

Quick Start Guide
LOGIC INSTRUMENT
FIELDBOOK F60

2

3
FR
Table of contents
As we are often updating and improving our products, your device’s software
may have a slightly dierent appearance or modied functionality than
presented in this Quick Start Guide.
Package Contents 4
Description of the phone 5
Replacing the battery 8
Inserting SIM & Micro-SD cards 10
Getting started 12
4G & WiFi connections 14
Barecode Scanner App 16
File Transfer 20
How to Install an APK 22

4
Package Contents
Check your product box for the following items:
-Fieldbook K101 with hand strap and battery
-Active Stylus pen
-Battery for stylus pen
-Micro USB cable
-USB host cable
-AC adapter with EU, UK and US plug
The items supplied with your device and available accessories may vary depending on
your region or service provider.
The supplied items are designed only for your device and may not be compatible with
other devices.
Unapproved accessories may cause your device to malfunction.

5
EN
Description of the smartphone
1
2
3
Webcam
Phone speaker
Microphone
12
34
5
4Home button
5Touchscreen

6
Description of the smartphone
6 7 8 9
10
11
12
13
14151618 17
19
20
21
22
23
13

7
EN
6IrDA interface
72D barcode scanner
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Upper hand strap xation
Loudspeaker
Volume + button
Volume - button
Right barcode trigger button
Guide for docking station
Back docking connector
Battery lock
Bottom docking connector
Lower hand strap xation
Battery cover
Left barcode trigger button
Power ON/OFF button
Micro USB port
3.5mm audio jack
AF camera with ash LED

8
Replacing the battery
WARNING: Make sure to turn o your Fieldbook before removing the battery.
Removing the battery
1. Slide the battery lock to the left (Picture 8.1 1)
2. Use the gap to pull up the battery (Picture 8.2 2)
Picture 8.1
1
Picture 8.2
2

9
EN
Inserting the battery
1. Insert the battery into the compartment with the latches on the bottom side rst
(Picture 9.1 1)
2. Push down the other side of the battery until it ts into place (Picture 9.2 2)
3. Slide the battery lock to the right to secure the battery in place (Picture 9.3 3)
Picture 9.1
1
Picture 9.2
2
Picture 9.3
3

10
Inserting SIM & Micro-SD cards
WARNING: Make sure to turn o your device before inserting a SIM or memory card.
To install or remove a SIM or SD card, the battery has to be removed rst.
Please refer to “Removing the battery” on page 8.
Inserting the SIM card
The slot accepts only mini SIM cards. Insert the card into the SIM slots like shown in the
picture on the right.
Inserting a SD card
Insert the micro SD card like show in the picture on the right.
Closing
Please refer to “Inserting the battery” on page 9.
Tip:
For the SIM card, a Pin number may be requested. Enter the SIM card pin number and
tap OK.

11
EN

12
Turn ON
1.Press and hold the ON/OFF button to turn on the device.
When you turn on your device, a PIN code may be requested.
2.Type the PIN code supplied with your SIM card.
Beware of typing a wrong PIN code.
3.Select‘OK’.
Turn OFF
To turn o your device, press and hold the ON/OFF button, and then select
Power o > OK.
Sound & Notication proles
1.When the device is turned on, press the Volume Up/Down button.
2.Select an option.
Getting started
Tip:
Your device goes in standby mode when you do not use it for a specified period of time.
To wake up your device, press the ON/OFF button.
To set the duration, go to Settings > Display > Sleep.

13
EN
Through the wizard
The rst time you start up your Fieldbook, the installation wizard will help you
set up your device:
-Language
-Date & time
-WiFi connection
-Location service options
Touch screen actions:
Tap: Touch once to select or launch a menu, option, or application.
Tap and hold: Tap an item and hold it for more than 2 seconds.
Drag: Tap an item and move it to a new location.
Double-tap: Tap an item twice quickly.
Flick: Briskly scroll up, down, left, or right to move through lists or screens.
Pinch: Place two of your ngers far apart, and then pinch them together.

14
4G & WiFi connections
4G connection
With your SIM card, you should be connected to the Internet without any further setup.
The Fieldbook will only have signal if you are ivn an area covered by your provider’s
network. When connected to the 4G network, the 4G icon is displayed in the status bar.
Activating the mobile data
To be able to access Internet, mobile data must be activated.
1. Drag down the status bar.
2. Tap the “Settings” icon to open the settings menu.
3. Tap “SIM cards”
4. Tap “Mobile data” to activate it.

15
EN
WiFi connection
Make sure that you are in a WiFi zone. You can access the WiFi settings quickly from the
status bar.
1. Drag down the status bar.
2. The status dashboard is displayed.
3. Tap the “Settings” icon to open the settings menu.
4. Tap “Wi-Fi”
5. If Wi-Fi is o, slide the Wi-Fi switch to the “ON” position. Once the WiFi is on, the
Fieldbook will scan and display the Wi-Fi networks in range.
6. Tap the name of the network you want to connect to.
Private networks are shown with a lock icon and will require to enter your password.

16
Barecode Scanner APP

First Step :
Navigate to settings folder --> choose“Device config Scanner”. (Picture.1)
Then select the scanner feature.(Picture.2)

17
EN
Barecode Scanner APP

Open the App :
In the main menu --> Select the app Barecode Scanner. (Picture.3)
Then select : click on Settings. (Picture.4)

18
Barecode Scanner APP
Settings : (Picture.5)
1. Select two dimensional module.
2. Choose the physical button you prefer (right or left)
3. HID Switch : Select On.
4. You can add sounds or vibration when you scan.
5. You can choose to add a prefix or a suffix that will be integrate to your code after
a scan.
Symbology :
In the main menu : Select Symbology (Picture.4)
You can choose the kind of code you need. (Picture.6)

19
EN
Barecode Scanner APP


20
File Transfer

Settings :
Navigate to settings folder --> choose“Storage”. (Picture.1)
Then select the three small points. (Picture.2)