04
1. Before use, make sure that the camera is fully charged and the TF card is
inserted. The TF card must be formatted when using it for the first time.
2. Long press the key button 3 seconds to turn on the camera, and it will
vibrate once.
3. When the camera is turned on, the recording light (white light) remains
on, and it will automatically enter recording mode. The white light will
flash during recording.
Short press the key button to stop recording. It will vibrate once to make
a reminder, and the white light will remain on. Press the key button
again to restart the recording and it will vibrate to remind again, then the
white light flashing resumes.
4. When the camera is turned on, quick short press the key button twice
to turn on the WIFI. When the WIFI starts, the blue WIFI indicator light will
flash, but if it is not connected to the phone within 1 minute, WIFI will
automatically turn off. If the connection with smartphone is successful, the
blue WIFI indicator light will remain on.
5. Long press the key button 3 seconds to turn off the camera, and it will
vibrate twice.
6. If the camera detects there’s no memory card or card reading error…etc.,
it will vibrate three times and the 3 lights will flash as a warning.
The battery light (green light) shows the camera battery power.
Green light remains on：battery power is more than 50%.
Green light slow flashes：battery power 30%-50%.
Green light quick flashes：battery power is less than 30%.
Note: If the WIFI is kept on when the camera is turned off, the next time
the camera is turned on, the WIFI will automatically be on.
PS.During use, there is a battery low-power alarm (quick flash of green
light). If it’s out of battery, the camera will automatically turn-off.
Using the Camera
Low-power Alarm
